main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc2862is8-1-pbf: viewers · Ray
ltc2862is8-1-pbf-etched.glb Publish 0.1.0 · Ray
ltc2862is8-1-pbf-etched.step ltc2862is8-1-pbf: factory component page (tier=mfr) · Ray
ltc2862is8-1-pbf-hero.glb ltc2862is8-1-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc2862is8-1-pbf-hero.overlay.json Publish 0.1.0 · Ray
ltc2862is8-1-pbf.glb Publish 0.1.0 · Ray
ltc2862is8-1-pbf.kicad_mod Publish 0.1.0 · Ray
ltc2862is8-1-pbf.kicad_sym Publish 0.1.0 · Ray
ltc2862is8-1-pbf.lbr Publish 0.1.0 · Ray
ltc2862is8-1-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LTC2862IS8-1#PBF

Analog Devices · RS-485/RS-422 ICs · SO-8

LTC2862IS8-1#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RO output Receiver output: high when A-B > 200mV and low when A-B < -200mV with RE low, and high if the inputs are open, shorted, or terminated without a signal.
2 RE input Receiver enable: a low input enables the receiver, a high input forces RO into high impedance, and RE high with DE low puts the part into low power shutdown.
3 DE input Driver enable: a high input enables the driver, a low input forces the driver outputs into high impedance, and DE low with RE high puts the part into low power shutdown.
4 DI input Driver input: with the driver enabled (DE high), a low on DI forces the noninverting driver output low and the inverting output high, and a high on DI forces the reverse.
5 GND power_in Ground.
6 A bidirectional Noninverting receiver input and noninverting driver output for the LTC2862; impedance is > 96kΩ in receive mode or when unpowered.
7 B bidirectional Inverting receiver input and inverting driver output for the LTC2862; impedance is > 96kΩ in receive mode or when unpowered.
8 VCC power_in Power supply: 3V < VCC < 5.5V, bypass with a 0.1µF ceramic capacitor to GND.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SO-8
Category Communication Interface Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Primary Power Supply (VCC) VCC 3 5.5 V 4
Operating Ambient Temperature Range (LTC286xI) TA -40 85 °C I-grade 2
Supply Current in Shutdown Mode (C-, I-Grade) ICCS 0 5 µA DE = 0V, RE = VCC = VL 4
Supply Current with Both Driver and Receiver Enabled (LTC2862-1) ICCTR 900 1300 µA No Load, DE = VCC = VL, RE = 0V 4
Differential Driver Output Voltage (R = ∞) /VOD/ 1.5 V R = ∞ (Figure 1) 5
Differential Driver Output Voltage (R = 27Ω) /VOD/ 1.5 5 V R = 27Ω (Figure 1) 5
Differential Driver Output Voltage (R = 50Ω) /VOD/ 2 V R = 50Ω (Figure 1) 5
Change in Magnitude of Driver Differential Output Voltage Δ/VOD/ 0.2 V R = 27Ω or 50Ω (Figure 1) 5
Driver Common-Mode Output Voltage VOC 3 V R = 27Ω or 50Ω (Figure 1) 5
Change in Magnitude of Driver Common-Mode Output Voltage Δ/VOC/ 0.2 V R = 27Ω or 50Ω (Figure 1) 5
Maximum Driver Short-Circuit Current IOSD -250 150 250 mA -60V ≤ (Y or Z) ≤ 60V (Figure 2) 5
Driver Three-State Output Current on Y and Z IOZD -30 30 µA DE = 0V, VCC = 0V or 3.3V, VO = -25V, 25V 5
Receiver Input Current (A,B) at VIN = 12V (H-/MP-grade row, applies to LTC2862) IIN 143 µA VCC = 0V or 3.3V, VIN = 12V (Figure 3) 5
Receiver Input Current (A,B) at VIN = -7V (LTC2862) IIN -100 µA VCC = 0V or 3.3V, VIN = -7V (Figure 3) 5
Receiver Input Resistance RIN 112 kΩ 0 ≤ VCC ≤ 5.5V, VIN = -25V or 25V (Figure 3) 5
Receiver Common Mode Input Voltage VCM -25 25 V (A + B)/2 5
Differential Input Signal Threshold Voltage (A, B) VTH -200 200 mV -25V ≤ VCM ≤ 25V 5
Differential Input Signal Hysteresis ΔVTH 150 mV VCM = 0V 5
Differential Input Failsafe Threshold Voltage -200 -50 0 mV -25V ≤ VCM ≤ 25V 5
Differential Input Failsafe Hysteresis 25 mV VCM = 0V 5
Receiver Output Low Voltage VOL 0.4 V I(RO) = 3mA (Sinking) 5
Receiver Three-State Output Current on RO IOZR -5 5 µA RE = High, RO = 0V or VCC 5
Receiver Short-Circuit Current IOSR -20 20 mA RE = Low, RO = 0V or VCC 5
Logic Input Current (DE, DI, RE) IINL -5 5 µA 0 ≤ VIN ≤ VCC 5
Maximum Data Rate (20 Mbps mode, LTC2862-1) fMAX 20 Mbps 6
Driver Input to Output (high speed) tPLHD, tPHLD 25 50 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 6
Driver Input to Output Difference ΔtPD 2 9 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 6
Driver Output Y to Output Z Skew tSKEWD -10 10 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 6
Driver Rise or Fall Time (high speed) tRD, tFD 4 15 ns RDIFF = 54Ω, CL = 100pF (Figure 4) 6
Driver Enable or Disable Time tZLD, tZHD, tLZD, tHZD 180 ns RL = 500Ω, CL = 50pF, RE = 0V (Figure 5) 6
Driver Enable from Shutdown tZHSD, tZLSD 9 µs RL = 500Ω, CL = 50pF, RE = High (Figure 5) 6
Time to Shutdown (driver) tSHDND 180 ns RL = 500Ω, CL = 50pF, RE = High (Figure 5) 6
Receiver Input to Output tPLHR, tPHLR 50 65 ns CL = 15pF, VCM = 1.5V, /VAB/ = 1.5V, tR and tF < 4ns (Figure 6) 6
Differential Receiver Skew tSKEWR 2 9 ns CL = 15pF (Figure 6) 6
Receiver Output Rise or Fall Time tRR, tFR 3 12.5 ns CL = 15pF (Figure 6) 6
Receiver Enable/Disable Time tZLR, tZHR, tLZR, tHZR 40 ns RL = 1k, CL = 15pF, DE = High (Figure 7) 6
Receiver Enable from Shutdown tZHSR, tZLSR 9 µs RL = 1k, CL = 15pF, DE = 0V (Figure 7) 6
Time to Shutdown (receiver) tSHDNR 100 ns RL = 1k, CL = 15pF, DE = 0V (Figure 7) 6
Supply Voltage (absolute maximum) VCC -0.3 6 V 2
Logic Input Voltages (absolute maximum) RE, DE, DI -0.3 6 V 2
Interface I/O Voltage (absolute maximum) A, B -60 60 V 2
Storage Temperature Range TSTG -65 150 °C 2
Maximum Junction Temperature TJMAX 150 °C S8 package 2
Thermal Resistance, Junction to Ambient (S8) θJA 150 °C/W S8 package 2
Thermal Resistance, Junction to Case (S8) θJC 39 °C/W S8 package 2

CAD (KiCad official)

  • Symbol: LTC2862IS8-1#PBF
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SO-8 (KiCad packages3D, STEP)
  • 3D model files: ltc2862is8-1-pbf-etched.step / ltc2862is8-1-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2862is8-1-pbf.step / ltc2862is8-1-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (26 pp, sha256 156a32e263226c9f, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF