Generated by kicad-footprint-generator · KiCad file format 20260206
LTC2644IMS-L12#PBF
Analog Devices · Digital To Analog Converters (DACs) · MSOP-12
LTC2644IMS-L12#PBF from Analog Devices, in a MSOP-12. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC | power_in | Supply voltage input for the part, specified for 2.7V ≤ VCC ≤ 5.5V, and should be bypassed to GND with a 0.1µF capacitor. |
| 2 | VOUTA | output | DAC A analog voltage output, which equals VREF • tPWHA/tPERA and swings within 0 to VREF (rail-to-rail buffered). |
| 3 | VOUTB | output | DAC B analog voltage output, which equals VREF • tPWHB/tPERB and swings within 0 to VREF (rail-to-rail buffered). |
| 4 | IDLSEL | input | Idle mode select input that must be tied to GND or VCC to choose the DAC output state after the idle timeout (nominally 60ms, t3 min 50ms, max 70ms) and the power-on-reset state. |
| 5 | IOVCC | power_in | I/O supply voltage input for the digital logic, specified for 1.71V ≤ IOVCC ≤ 5.5V, and should be bypassed to GND with a 0.1µF capacitor. |
| 6 | GND | power_in | Ground reference pin for the device, which should be connected to a low-resistance ground plane. |
| 7 | PD | input | Active-low power-down input that must be connected to GND to power down the part (typical supply current <1µA) or to IOVCC for normal operation. |
| 8 | INB | input | PWM input for DAC B, accepting 30Hz to 6.25kHz (12-bit), 25kHz (10-bit) or 100kHz (8-bit) frequencies with logic levels referenced to IOVCC. |
| 9 | INA | input | PWM input for DAC A, accepting 30Hz to 6.25kHz (12-bit), 25kHz (10-bit) or 100kHz (8-bit) frequencies with logic levels referenced to IOVCC. |
| 10 | REF | bidirectional | Reference input (1V ≤ VREF ≤ VCC) when REFSEL is tied to VCC, or 10ppm/°C 1.25V internal reference output when REFSEL is tied to GND, which may be bypassed with up to 10µF and must be buffered when driving a DC load. |
| 11 | REFSEL | input | Reference select input that must be tied to GND for internal reference mode or to VCC for external reference mode. |
| 12 | GND | power_in | Ground reference pin for the device, which should be connected to a low-resistance ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-12 |
| Category | Data Converters |
| Pins | 12 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC Positive Supply Voltage | VCC | 2.7 | 5.5 | V | For Specified Performance | 4 | |
| IOVCC Digital Input Supply Voltage | IOVCC | 1.71 | 5.5 | V | For Specified Performance | 4 | |
| Supply Current (3V) | ICC | 2.7 | 4 | mA | VCC = 3V, Internal Reference | 4 | |
| Supply Current (5V) | ICC | 4.6 | 6 | mA | VCC = 5V, Internal Reference | 4 | |
| Supply Current, IOVCC | ICC(IOVCC) | 25 | 50 | µA | IOVCC = 5V | 4 | |
| Supply Current in Power-Down Mode | ISD | 0.5 | 5 | µA | VCC = 5V, PD = 0V | 4 | |
| Supply Current in Power-Down Mode, IOVCC | ISD(IOVCC) | 0.5 | 5 | µA | IOVCC = 5V, PD = 0V | 4 | |
| Resolution | 12 | Bits | 4 | ||||
| Monotonicity | 12 | Bits | VCC = 3V, Internal Ref. (Note 3) | 4 | |||
| Differential Nonlinearity | DNL | -1 | 1 | LSB | VCC = 3V, Internal Ref. (Note 3) | 4 | |
| Integral Nonlinearity | INL | -2.5 | 1 | 2.5 | LSB | VCC = 3V, Internal Ref. (Note 3) | 4 |
| Zero-Scale Error | ZSE | 0.5 | 5 | mV | VCC = 3V, Internal Ref., Code = 0 | 4 | |
| Offset Error | VOS | -5 | 0.5 | 5 | mV | VCC = 3V, Internal Ref. (Note 4) | 4 |
| Gain Error | GE | -0.8 | 0.2 | 0.8 | %FSR | VCC = 3V, Internal Ref. | 4 |
| Load Regulation (VCC = 3V) | 0.14 | 0.256 | LSB/mA | Internal Ref., Mid-Scale, VCC = 3V ±10%, -5mA ≤ IOUT ≤ 5mA | 4 | ||
| Load Regulation (VCC = 5V) | 0.14 | 0.256 | LSB/mA | Internal Ref., Mid-Scale, VCC = 5V ±10%, -10mA ≤ IOUT ≤ 10mA | 4 | ||
| DC Output Impedance (VCC = 3V) | ROUT | 0.09 | 0.156 | Ω | Internal Ref., Mid-Scale, VCC = 3V ±10%, -5mA ≤ IOUT ≤ 5mA | 4 | |
| DC Output Impedance (VCC = 5V) | ROUT | 0.09 | 0.156 | Ω | Internal Ref., Mid-Scale, VCC = 5V ±10%, -10mA ≤ IOUT ≤ 10mA | 4 | |
| VREF Input Voltage Range | VREF | 1 | V | 5 | |||
| Reference Input Resistance | 120 | 160 | 200 | kΩ | 5 | ||
| Reference Current, Power-Down Mode | IREF | 0.005 | 1.5 | µA | DAC Powered Down | 5 | |
| Reference Output Voltage | 1.24 | 1.25 | 1.26 | V | 5 | ||
| Digital Input Low Voltage | VIL | 0.5 | V | 5 | |||
| Digital Input Leakage | ILK | -1 | 1 | µA | INA/INB = GND to IOVCC | 5 | |
| Digital Input Capacitance | CIN | 5 | pF | Guaranteed by design, not production tested (Note 7) | 5 | ||
| INA/INB High Time | tPWH | 25 | ns | 6 | |||
| INA/INB Low Time | tPWL | 25 | ns | 6 | |||
| INA/INB Rising Edge to Rising Edge Period (LTC2644-L12) | tPER | 0.16 | 33 | ms | 6 | ||
| INA/INB Idle Mode Timeout | t3 | 50 | 70 | ms | 6 | ||
| INA/INB Frequency (LTC2644-L12) | fMAX | 0.03 | 6.25 | kHz | 6 | ||
| Supply Voltages (VCC, IOVCC) | VCC, IOVCC | -0.3 | 6 | V | All voltages with respect to GND | 2 | |
| INA, INB Input Voltage | INA, INB | -0.3 | 6 | V | 2 | ||
| IDLSEL, PD, REFSEL Input Voltage | IDLSEL, PD, REFSEL | -0.3 | 6 | V | 2 | ||
| Operating Temperature Range (LTC2644I) | -40 | 85 | °C | LTC2644I grade | 2 | ||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction-to-Ambient Thermal Resistance (MSOP-12) | θJA | 135 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LTC2644IMS-L12#PBF - Footprint:
Package_SO:MSOP-12_3x4.039mm_P0.65mm - 3D model: MSOP-12 (KiCad packages3D, STEP)
- 3D model files:
ltc2644ims-l12-pbf-etched.step/ltc2644ims-l12-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2644ims-l12-pbf.step/ltc2644ims-l12-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
2f513d9771c3f885, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).