Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC2644IMS-L12#PBF

Analog Devices · Digital To Analog Converters (DACs) · MSOP-12

LTC2644IMS-L12#PBF from Analog Devices, in a MSOP-12. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC power_in Supply voltage input for the part, specified for 2.7V ≤ VCC ≤ 5.5V, and should be bypassed to GND with a 0.1µF capacitor.
2 VOUTA output DAC A analog voltage output, which equals VREF • tPWHA/tPERA and swings within 0 to VREF (rail-to-rail buffered).
3 VOUTB output DAC B analog voltage output, which equals VREF • tPWHB/tPERB and swings within 0 to VREF (rail-to-rail buffered).
4 IDLSEL input Idle mode select input that must be tied to GND or VCC to choose the DAC output state after the idle timeout (nominally 60ms, t3 min 50ms, max 70ms) and the power-on-reset state.
5 IOVCC power_in I/O supply voltage input for the digital logic, specified for 1.71V ≤ IOVCC ≤ 5.5V, and should be bypassed to GND with a 0.1µF capacitor.
6 GND power_in Ground reference pin for the device, which should be connected to a low-resistance ground plane.
7 PD input Active-low power-down input that must be connected to GND to power down the part (typical supply current <1µA) or to IOVCC for normal operation.
8 INB input PWM input for DAC B, accepting 30Hz to 6.25kHz (12-bit), 25kHz (10-bit) or 100kHz (8-bit) frequencies with logic levels referenced to IOVCC.
9 INA input PWM input for DAC A, accepting 30Hz to 6.25kHz (12-bit), 25kHz (10-bit) or 100kHz (8-bit) frequencies with logic levels referenced to IOVCC.
10 REF bidirectional Reference input (1V ≤ VREF ≤ VCC) when REFSEL is tied to VCC, or 10ppm/°C 1.25V internal reference output when REFSEL is tied to GND, which may be bypassed with up to 10µF and must be buffered when driving a DC load.
11 REFSEL input Reference select input that must be tied to GND for internal reference mode or to VCC for external reference mode.
12 GND power_in Ground reference pin for the device, which should be connected to a low-resistance ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-12
Category Data Converters
Pins 12

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC Positive Supply Voltage VCC 2.7 5.5 V For Specified Performance 4
IOVCC Digital Input Supply Voltage IOVCC 1.71 5.5 V For Specified Performance 4
Supply Current (3V) ICC 2.7 4 mA VCC = 3V, Internal Reference 4
Supply Current (5V) ICC 4.6 6 mA VCC = 5V, Internal Reference 4
Supply Current, IOVCC ICC(IOVCC) 25 50 µA IOVCC = 5V 4
Supply Current in Power-Down Mode ISD 0.5 5 µA VCC = 5V, PD = 0V 4
Supply Current in Power-Down Mode, IOVCC ISD(IOVCC) 0.5 5 µA IOVCC = 5V, PD = 0V 4
Resolution 12 Bits 4
Monotonicity 12 Bits VCC = 3V, Internal Ref. (Note 3) 4
Differential Nonlinearity DNL -1 1 LSB VCC = 3V, Internal Ref. (Note 3) 4
Integral Nonlinearity INL -2.5 1 2.5 LSB VCC = 3V, Internal Ref. (Note 3) 4
Zero-Scale Error ZSE 0.5 5 mV VCC = 3V, Internal Ref., Code = 0 4
Offset Error VOS -5 0.5 5 mV VCC = 3V, Internal Ref. (Note 4) 4
Gain Error GE -0.8 0.2 0.8 %FSR VCC = 3V, Internal Ref. 4
Load Regulation (VCC = 3V) 0.14 0.256 LSB/mA Internal Ref., Mid-Scale, VCC = 3V ±10%, -5mA ≤ IOUT ≤ 5mA 4
Load Regulation (VCC = 5V) 0.14 0.256 LSB/mA Internal Ref., Mid-Scale, VCC = 5V ±10%, -10mA ≤ IOUT ≤ 10mA 4
DC Output Impedance (VCC = 3V) ROUT 0.09 0.156 Ω Internal Ref., Mid-Scale, VCC = 3V ±10%, -5mA ≤ IOUT ≤ 5mA 4
DC Output Impedance (VCC = 5V) ROUT 0.09 0.156 Ω Internal Ref., Mid-Scale, VCC = 5V ±10%, -10mA ≤ IOUT ≤ 10mA 4
VREF Input Voltage Range VREF 1 V 5
Reference Input Resistance 120 160 200 kΩ 5
Reference Current, Power-Down Mode IREF 0.005 1.5 µA DAC Powered Down 5
Reference Output Voltage 1.24 1.25 1.26 V 5
Digital Input Low Voltage VIL 0.5 V 5
Digital Input Leakage ILK -1 1 µA INA/INB = GND to IOVCC 5
Digital Input Capacitance CIN 5 pF Guaranteed by design, not production tested (Note 7) 5
INA/INB High Time tPWH 25 ns 6
INA/INB Low Time tPWL 25 ns 6
INA/INB Rising Edge to Rising Edge Period (LTC2644-L12) tPER 0.16 33 ms 6
INA/INB Idle Mode Timeout t3 50 70 ms 6
INA/INB Frequency (LTC2644-L12) fMAX 0.03 6.25 kHz 6
Supply Voltages (VCC, IOVCC) VCC, IOVCC -0.3 6 V All voltages with respect to GND 2
INA, INB Input Voltage INA, INB -0.3 6 V 2
IDLSEL, PD, REFSEL Input Voltage IDLSEL, PD, REFSEL -0.3 6 V 2
Operating Temperature Range (LTC2644I) -40 85 °C LTC2644I grade 2
Maximum Junction Temperature TJMAX 150 °C 2
Storage Temperature Range -65 150 °C 2
Junction-to-Ambient Thermal Resistance (MSOP-12) θJA 135 °C/W 2

CAD (KiCad official)

  • Symbol: LTC2644IMS-L12#PBF
  • Footprint: Package_SO:MSOP-12_3x4.039mm_P0.65mm
  • 3D model: MSOP-12 (KiCad packages3D, STEP)
  • 3D model files: ltc2644ims-l12-pbf-etched.step / ltc2644ims-l12-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2644ims-l12-pbf.step / ltc2644ims-l12-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 2f513d9771c3f885, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF