main
Ray Publish 0.1.0 8d20515

LTC2630ISC6-LZ12#TRMPBF

Analog Devices · Digital To Analog Converters (DACs) · SC-70-6

LTC2630ISC6-LZ12#TRMPBF from Analog Devices, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 CS/LD input Serial interface chip select / load input.
2 SCK input Serial interface clock input.
3 SDI input Serial interface data input.
4 VCC power_in Supply, 2.7 V to 5.5 V (-LZ12).
5 GND power_in Ground.
6 VOUT output DAC analog voltage output (0 to 2.5 V full scale for -LZ12).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SC-70-6
Category ADC/DAC/Data Conversion
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution 12 Bits 4
Monotonicity 12 Bits VCC = 3V, Internal Ref. (Note 3) 4
Monotonicity 12 Bits VCC = 5V, Internal Ref. (Note 3) 6
Differential Nonlinearity DNL -1 1 LSB VCC = 3V, Internal Ref. (Note 3) 4
Differential Nonlinearity DNL -1 1 LSB VCC = 5V, Internal Ref. (Note 3) 6
Integral Nonlinearity INL -2 1 2 LSB VCC = 3V, Internal Ref. (Note 3) 4
Integral Nonlinearity INL -2 1 2 LSB VCC = 5V, Internal Ref. (Note 3) 6
Zero Scale Error ZSE 0.5 5 mV VCC = 3V, Internal Ref., Code = 0 4
Zero Scale Error ZSE 0.5 5 mV VCC = 5V, Internal Ref., Code = 0 6
Offset Error VOS -5 0.5 5 mV VCC = 3V, Internal Ref. (Note 4) 4
Offset Error VOS -5 0.5 5 mV VCC = 5V, Internal Ref. (Note 4) 6
Full Scale Error FSE -0.8 0.2 0.8 %FSR VCC = 3V, Internal Ref. 4
Full Scale Error FSE -0.8 0.2 0.8 %FSR VCC = 5V, Internal Ref. 6
Full Scale Voltage Temperature Coefficient (I-Grade) VFSTC -10 10 ppm/°C VCC = 3V, Internal Ref. (Note 9); I-Grade 4
Full Scale Voltage Temperature Coefficient (I-Grade) VFSTC -10 10 ppm/°C VCC = 5V, Internal Ref. (Note 9); I-Grade 6
Offset Error Temperature Coefficient VOSTC -10 10 µV/°C VCC = 3V, Internal Ref. (Note 4) 4
Offset Error Temperature Coefficient VOSTC -10 10 µV/°C VCC = 5V, Internal Ref. (Note 4) 6
Load Regulation 0.1 0.16 LSB/mA VCC = 5V ±10%, Internal Ref., Mid-Scale, -10mA ≤ IOUT ≤ 10mA 6
DC Output Impedance ROUT 0.08 0.156 Ω VCC = 3V ±10%, Internal Ref., Mid-Scale, -5mA ≤ IOUT ≤ 5mA 4
DC Output Impedance ROUT 0.1 0.156 Ω VCC = 5V ±10%, Internal Ref., Mid-Scale, -10mA ≤ IOUT ≤ 10mA 6
DAC Output Span (internal reference) VOUT 0 2.5 V Internal Reference 4
DAC Output Span (supply as reference) VOUT 0 V Supply as Reference (0V to VCC) 4
Short Circuit Output Current, sinking ISC 27 50 mA VFS = VCC = 5.5V; Zero Scale; VOUT Shorted to VCC 4
Short Circuit Output Current, sourcing ISC -50 -28 mA VFS = VCC = 5.5V; Full Scale; VOUT Shorted to GND 4
Power Supply Voltage VCC 2.7 5.5 V For Specified Performance (LTC2630-L) 4
Supply Current ICC 160 220 µA VCC = 3V, Supply as Reference 4
Supply Current ICC 180 240 µA VCC = 3V, Internal Reference 4
Supply Current ICC 180 250 µA VCC = 5V, Supply as Reference 4
Supply Current ICC 190 260 µA VCC = 5V, Internal Reference 4
Supply Current in Power-Down Mode ISD 0.36 1.8 µA VCC = 5V, C-Grade, I-Grade 4
Digital Input High Voltage VIH 2.4 V VCC = 3.6V to 5.5V 4
Digital Input High Voltage VIH 2 V VCC = 2.7V to 3.6V 4
Digital Input Low Voltage VIL 0.8 V VCC = 4.5V to 5.5V 4
Digital Input Low Voltage VIL 0.6 V VCC = 2.7V to 4.5V 4
Digital Input Leakage ILK -1 1 µA VIN = GND to VCC 4
Digital Input Capacitance CIN 2.5 pF (Note 7) 4
SDI Valid to SCK Setup t1 4 ns VCC = 2.7V to 5.5V (Figure 1) 5
SDI Valid to SCK Hold t2 4 ns VCC = 2.7V to 5.5V (Figure 1) 5
SCK High Time t3 9 ns VCC = 2.7V to 5.5V (Figure 1) 5
SCK Low Time t4 9 ns VCC = 2.7V to 5.5V (Figure 1) 5
CS/LD Pulse width t5 10 ns VCC = 2.7V to 5.5V (Figure 1) 5
SCK High to CS/LD High t6 7 ns VCC = 2.7V to 5.5V (Figure 1) 5
CS/LD Low to SCK High t7 7 ns VCC = 2.7V to 5.5V (Figure 1) 5
CS/LD High to SCK Positive Edge t10 7 ns VCC = 2.7V to 5.5V (Figure 1) 5
SCK Frequency 50 MHz 50% Duty Cycle 5
Supply Voltage (VCC) absolute maximum VCC -0.3 6 V Referenced to GND 2
CS/LD, SCK, SDI absolute maximum -0.3 6 V 2
VOUT absolute maximum VOUT -0.3 V Max is min(VCC + 0.3V, 6V) 2
Operating Temperature Range (LTC2630I) -40 85 °C LTC2630I 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering) 300 °C Soldering, 10 sec 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance, junction to ambient θJA 300 °C/W 6-Lead SC70 (SC6) package 2
PSR Power Supply Rejection PSR -80 dB VCC = 3V ±10% or 5V ±10% 4

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LTC2630ISC6-LZ12#TRMPBF
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6, generated on the KiCad land (body 1.25 x 2 mm, terminals on the pads, 1.0 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ltc2630isc6-lz12-etched.step / ltc2630isc6-lz12-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2630isc6-lz12.step / ltc2630isc6-lz12.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (22 pp, sha256 f965ff4d9867b314, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF