component
LTC2630ISC6-LZ12
Public Made by Adomby adom
Analog Devices Digital To Analog Converters (DACs), SC-70-6. Pinout settled in review by an AI reviewer against the manufacturer's datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownLTC2630ISC6-LZ12#TRMPBF
Analog Devices · Digital To Analog Converters (DACs) · SC-70-6
LTC2630ISC6-LZ12#TRMPBF from Analog Devices, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS/LD | input | Serial interface chip select / load input. |
| 2 | SCK | input | Serial interface clock input. |
| 3 | SDI | input | Serial interface data input. |
| 4 | VCC | power_in | Supply, 2.7 V to 5.5 V (-LZ12). |
| 5 | GND | power_in | Ground. |
| 6 | VOUT | output | DAC analog voltage output (0 to 2.5 V full scale for -LZ12). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SC-70-6 |
| Category | ADC/DAC/Data Conversion |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resolution | 12 | Bits | 4 | ||||
| Monotonicity | 12 | Bits | VCC = 3V, Internal Ref. (Note 3) | 4 | |||
| Monotonicity | 12 | Bits | VCC = 5V, Internal Ref. (Note 3) | 6 | |||
| Differential Nonlinearity | DNL | -1 | 1 | LSB | VCC = 3V, Internal Ref. (Note 3) | 4 | |
| Differential Nonlinearity | DNL | -1 | 1 | LSB | VCC = 5V, Internal Ref. (Note 3) | 6 | |
| Integral Nonlinearity | INL | -2 | 1 | 2 | LSB | VCC = 3V, Internal Ref. (Note 3) | 4 |
| Integral Nonlinearity | INL | -2 | 1 | 2 | LSB | VCC = 5V, Internal Ref. (Note 3) | 6 |
| Zero Scale Error | ZSE | 0.5 | 5 | mV | VCC = 3V, Internal Ref., Code = 0 | 4 | |
| Zero Scale Error | ZSE | 0.5 | 5 | mV | VCC = 5V, Internal Ref., Code = 0 | 6 | |
| Offset Error | VOS | -5 | 0.5 | 5 | mV | VCC = 3V, Internal Ref. (Note 4) | 4 |
| Offset Error | VOS | -5 | 0.5 | 5 | mV | VCC = 5V, Internal Ref. (Note 4) | 6 |
| Full Scale Error | FSE | -0.8 | 0.2 | 0.8 | %FSR | VCC = 3V, Internal Ref. | 4 |
| Full Scale Error | FSE | -0.8 | 0.2 | 0.8 | %FSR | VCC = 5V, Internal Ref. | 6 |
| Full Scale Voltage Temperature Coefficient (I-Grade) | VFSTC | -10 | 10 | ppm/°C | VCC = 3V, Internal Ref. (Note 9); I-Grade | 4 | |
| Full Scale Voltage Temperature Coefficient (I-Grade) | VFSTC | -10 | 10 | ppm/°C | VCC = 5V, Internal Ref. (Note 9); I-Grade | 6 | |
| Offset Error Temperature Coefficient | VOSTC | -10 | 10 | µV/°C | VCC = 3V, Internal Ref. (Note 4) | 4 | |
| Offset Error Temperature Coefficient | VOSTC | -10 | 10 | µV/°C | VCC = 5V, Internal Ref. (Note 4) | 6 | |
| Load Regulation | 0.1 | 0.16 | LSB/mA | VCC = 5V ±10%, Internal Ref., Mid-Scale, -10mA ≤ IOUT ≤ 10mA | 6 | ||
| DC Output Impedance | ROUT | 0.08 | 0.156 | Ω | VCC = 3V ±10%, Internal Ref., Mid-Scale, -5mA ≤ IOUT ≤ 5mA | 4 | |
| DC Output Impedance | ROUT | 0.1 | 0.156 | Ω | VCC = 5V ±10%, Internal Ref., Mid-Scale, -10mA ≤ IOUT ≤ 10mA | 6 | |
| DAC Output Span (internal reference) | VOUT | 0 | 2.5 | V | Internal Reference | 4 | |
| DAC Output Span (supply as reference) | VOUT | 0 | V | Supply as Reference (0V to VCC) | 4 | ||
| Short Circuit Output Current, sinking | ISC | 27 | 50 | mA | VFS = VCC = 5.5V; Zero Scale; VOUT Shorted to VCC | 4 | |
| Short Circuit Output Current, sourcing | ISC | -50 | -28 | mA | VFS = VCC = 5.5V; Full Scale; VOUT Shorted to GND | 4 | |
| Power Supply Voltage | VCC | 2.7 | 5.5 | V | For Specified Performance (LTC2630-L) | 4 | |
| Supply Current | ICC | 160 | 220 | µA | VCC = 3V, Supply as Reference | 4 | |
| Supply Current | ICC | 180 | 240 | µA | VCC = 3V, Internal Reference | 4 | |
| Supply Current | ICC | 180 | 250 | µA | VCC = 5V, Supply as Reference | 4 | |
| Supply Current | ICC | 190 | 260 | µA | VCC = 5V, Internal Reference | 4 | |
| Supply Current in Power-Down Mode | ISD | 0.36 | 1.8 | µA | VCC = 5V, C-Grade, I-Grade | 4 | |
| Digital Input High Voltage | VIH | 2.4 | V | VCC = 3.6V to 5.5V | 4 | ||
| Digital Input High Voltage | VIH | 2 | V | VCC = 2.7V to 3.6V | 4 | ||
| Digital Input Low Voltage | VIL | 0.8 | V | VCC = 4.5V to 5.5V | 4 | ||
| Digital Input Low Voltage | VIL | 0.6 | V | VCC = 2.7V to 4.5V | 4 | ||
| Digital Input Leakage | ILK | -1 | 1 | µA | VIN = GND to VCC | 4 | |
| Digital Input Capacitance | CIN | 2.5 | pF | (Note 7) | 4 | ||
| SDI Valid to SCK Setup | t1 | 4 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| SDI Valid to SCK Hold | t2 | 4 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| SCK High Time | t3 | 9 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| SCK Low Time | t4 | 9 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| CS/LD Pulse width | t5 | 10 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| SCK High to CS/LD High | t6 | 7 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| CS/LD Low to SCK High | t7 | 7 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| CS/LD High to SCK Positive Edge | t10 | 7 | ns | VCC = 2.7V to 5.5V (Figure 1) | 5 | ||
| SCK Frequency | 50 | MHz | 50% Duty Cycle | 5 | |||
| Supply Voltage (VCC) absolute maximum | VCC | -0.3 | 6 | V | Referenced to GND | 2 | |
| CS/LD, SCK, SDI absolute maximum | -0.3 | 6 | V | 2 | |||
| VOUT absolute maximum | VOUT | -0.3 | V | Max is min(VCC + 0.3V, 6V) | 2 | ||
| Operating Temperature Range (LTC2630I) | -40 | 85 | °C | LTC2630I | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering) | 300 | °C | Soldering, 10 sec | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance, junction to ambient | θJA | 300 | °C/W | 6-Lead SC70 (SC6) package | 2 | ||
| PSR Power Supply Rejection | PSR | -80 | dB | VCC = 3V ±10% or 5V ±10% | 4 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LTC2630ISC6-LZ12#TRMPBF - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6, generated on the KiCad land (body 1.25 x 2 mm, terminals on the pads, 1.0 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ltc2630isc6-lz12-etched.step/ltc2630isc6-lz12-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2630isc6-lz12.step/ltc2630isc6-lz12.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (22 pp, sha256
f965ff4d9867b314, retrieved 2026-11-13, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).