main
Ray
Publish 0.1.0
3905361
LTC2451ITS8#TRPBF
Analog Devices · Analog To Digital Converters (ADCs) · TSOT-23-8
LTC2451ITS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 2 | REF- | input | Negative differential reference input; may be any value between GND and VCC as long as REF+ stays at least 2.5V more positive than REF-. |
| 3 | REF+ | input | Positive differential reference input; must remain at least 2.5V above REF- and sets the full-scale range with REF-. |
| 4 | VCC | power_in | Positive supply voltage (2.7V to 5.5V); bypass to GND with a 10µF capacitor in parallel with a low-inductance 0.1µF capacitor close to the part. |
| 5 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 6 | IN | input | Analog input with a single-ended input range of VREF- to VREF+. |
| 7 | SCL | input | Serial clock input of the I2C interface; the LTC2451 acts only as a slave and accepts only an external clock. |
| 8 | SDA | bidirectional | Bidirectional I2C serial data line that outputs the conversion result; open-drain pull-down in data output mode requiring an external 1.7k pull-up to VCC, otherwise high impedance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Converters |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resolution (No Missing Codes) | 16 | Bits | Note 3 | 2 | |||
| Integral Nonlinearity | INL | 2 | 10 | LSB | Note 4 | 2 | |
| Offset Error 30Hz Mode | 0.08 | 0.5 | mV | 30Hz Mode | 2 | ||
| Offset Error 60Hz Mode | 0.5 | 2 | mV | 60Hz Mode | 2 | ||
| Offset Error Drift | 0.02 | LSB/°C | 2 | ||||
| Gain Error | 0.01 | 0.02 | % of FS | 2 | |||
| Gain Error Drift | 0.02 | LSB/°C | 2 | ||||
| Transition Noise | 1.4 | µVRMS | 2 | ||||
| Power Supply Rejection DC 30Hz Mode | 80 | dB | DC, 30Hz Mode | 2 | |||
| Power Supply Rejection DC 60Hz Mode | 80 | dB | DC, 60Hz Mode | 2 | |||
| Conversion Time 30Hz Mode | tCONV | 26 | 33.2 | 46 | ms | 30Hz Mode | 3 |
| Conversion Time 60Hz Mode | tCONV | 13 | 16.6 | 23 | ms | 60Hz Mode | 3 |
| SCL Clock Frequency | fSCL | 0 | 400 | kHz | 3 | ||
| Hold Time (Repeated) START Condition | tHD(SDA) | 0.6 | µs | 3 | |||
| LOW Period of the SCL Pin | tLOW | 1.3 | µs | 3 | |||
| HIGH Period of the SCL Pin | tHIGH | 0.6 | µs | 3 | |||
| Set-Up Time for a Repeated START Condition | tSU(STA) | 0.6 | µs | 3 | |||
| Data Hold Time | tHD(DAT) | 0 | 0.9 | µs | 3 | ||
| Data Set-Up Time | tSU(DAT) | 100 | ns | 3 | |||
| Rise Time for SDA/SCL Signals | tr | 300 | ns | Note 6; min is 20 + 0.1CB | 3 | ||
| Fall Time for SDA/SCL Signals | tf | 300 | ns | Note 6; min is 20 + 0.1CB | 3 | ||
| Set-Up Time for STOP Condition | tSU(STO) | 0.6 | µs | 3 | |||
| Bus Free Time Between a STOP and START Condition | tBUF | 1.3 | µs | 3 | |||
| Supply Voltage | VCC | 2.7 | 5.5 | V | 3 | ||
| Supply Current Conversion | ICC | 400 | 700 | µA | Conversion | 3 | |
| Supply Current Sleep | ICC | 0.2 | 0.5 | µA | Sleep | 3 | |
| High Level Input Voltage | VIH | 0.7 | VCC | printed as 0.7VCC | 3 | ||
| Low Level Input Voltage | VIL | 0.3 | VCC | printed as 0.3VCC | 3 | ||
| Hysteresis of Schmidt Trigger Inputs | VHYS | 0.05 | VCC | Note 3; printed as 0.05VCC | 3 | ||
| Low Level Output Voltage (SDA) | VOL | 0.4 | V | I = 3mA | 3 | ||
| Input Leakage | IIN | -1 | 1 | µA | 0.1VCC ≤ VIN ≤ 0.9VCC | 3 | |
| Capacitance for Each I/O Pin | CI | 10 | pF | 3 | |||
| Capacitance Load for Each Bus Line | CB | 400 | pF | 3 | |||
| IN DC Leakage Current (VIN = GND) | IDC_LEAK(VIN) | -10 | 1 | 10 | nA | VIN = GND (Note 8) | 3 |
| IN DC Leakage Current (VIN = VCC) | IDC_LEAK(VIN) | -10 | 1 | 10 | nA | VIN = VCC (Note 8) | 3 |
| REF+, REF- DC Leakage Current | IDC_LEAK(REF+, REF-) | -10 | 1 | 10 | nA | VREF = 5V (Note 8) | 3 |
| IN Sampling Capacitance | CIN | 0.35 | pF | 3 | |||
| Input Sampling Current | ICONV | 50 | nA | Note 5 | 3 | ||
| Output Fall Time | tOF | 250 | ns | VIH(MIN) to VIL(MAX) Bus Load CB 10pF to 400pF (Note 6); min is 20 + 0.1CB | 4 | ||
| Input Spike Suppression | tSP | 50 | ns | 4 | |||
| Supply Voltage (absolute maximum) | VCC | -0.3 | 6 | V | 2 | ||
| Analog Input Voltage (absolute maximum, lower limit) | VIN | -0.3 | V | upper limit is VCC + 0.3V | 2 | ||
| Reference Voltage (absolute maximum, lower limit) | VREF+, VREF- | -0.3 | V | upper limit is VCC + 0.3V | 2 | ||
| Digital Voltage (absolute maximum, lower limit) | VSDA, VSCL | -0.3 | V | upper limit is VCC + 0.3V | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Operating Temperature Range (LTC2451I) | -40 | 85 | °C | LTC2451I | 2 | ||
| Maximum Junction Temperature | TJMAX | 125 | °C | TS8 package, C/I grade | 2 | ||
| Junction-to-Ambient Thermal Resistance | θJA | 140 | °C/W | TS8 package, C/I grade | 2 |
CAD (KiCad official)
- Symbol:
LTC2451ITS8#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-8 - 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files:
ltc2451its8-trpbf-etched.step/ltc2451its8-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc2451its8-trpbf.step/ltc2451its8-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
5e3eba71951e62a0, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC2451ITS8#TRPBF
**Analog Devices** · Analog To Digital Converters (ADCs) · TSOT-23-8
LTC2451ITS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 2 | REF- | input | Negative differential reference input; may be any value between GND and VCC as long as REF+ stays at least 2.5V more positive than REF-. |
| 3 | REF+ | input | Positive differential reference input; must remain at least 2.5V above REF- and sets the full-scale range with REF-. |
| 4 | VCC | power_in | Positive supply voltage (2.7V to 5.5V); bypass to GND with a 10µF capacitor in parallel with a low-inductance 0.1µF capacitor close to the part. |
| 5 | GND | power_in | Ground; connect to a ground plane through a low impedance connection. |
| 6 | IN | input | Analog input with a single-ended input range of VREF- to VREF+. |
| 7 | SCL | input | Serial clock input of the I2C interface; the LTC2451 acts only as a slave and accepts only an external clock. |
| 8 | SDA | bidirectional | Bidirectional I2C serial data line that outputs the conversion result; open-drain pull-down in data output mode requiring an external 1.7k pull-up to VCC, otherwise high impedance. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-8 |
| Category | Data Converters |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Resolution (No Missing Codes) | | 16 | | | Bits | Note 3 | 2 |
| Integral Nonlinearity | INL | | 2 | 10 | LSB | Note 4 | 2 |
| Offset Error 30Hz Mode | | | 0.08 | 0.5 | mV | 30Hz Mode | 2 |
| Offset Error 60Hz Mode | | | 0.5 | 2 | mV | 60Hz Mode | 2 |
| Offset Error Drift | | | 0.02 | | LSB/°C | | 2 |
| Gain Error | | | 0.01 | 0.02 | % of FS | | 2 |
| Gain Error Drift | | | 0.02 | | LSB/°C | | 2 |
| Transition Noise | | | 1.4 | | µVRMS | | 2 |
| Power Supply Rejection DC 30Hz Mode | | | 80 | | dB | DC, 30Hz Mode | 2 |
| Power Supply Rejection DC 60Hz Mode | | | 80 | | dB | DC, 60Hz Mode | 2 |
| Conversion Time 30Hz Mode | tCONV | 26 | 33.2 | 46 | ms | 30Hz Mode | 3 |
| Conversion Time 60Hz Mode | tCONV | 13 | 16.6 | 23 | ms | 60Hz Mode | 3 |
| SCL Clock Frequency | fSCL | 0 | | 400 | kHz | | 3 |
| Hold Time (Repeated) START Condition | tHD(SDA) | 0.6 | | | µs | | 3 |
| LOW Period of the SCL Pin | tLOW | 1.3 | | | µs | | 3 |
| HIGH Period of the SCL Pin | tHIGH | 0.6 | | | µs | | 3 |
| Set-Up Time for a Repeated START Condition | tSU(STA) | 0.6 | | | µs | | 3 |
| Data Hold Time | tHD(DAT) | 0 | | 0.9 | µs | | 3 |
| Data Set-Up Time | tSU(DAT) | 100 | | | ns | | 3 |
| Rise Time for SDA/SCL Signals | tr | | | 300 | ns | Note 6; min is 20 + 0.1CB | 3 |
| Fall Time for SDA/SCL Signals | tf | | | 300 | ns | Note 6; min is 20 + 0.1CB | 3 |
| Set-Up Time for STOP Condition | tSU(STO) | 0.6 | | | µs | | 3 |
| Bus Free Time Between a STOP and START Condition | tBUF | 1.3 | | | µs | | 3 |
| Supply Voltage | VCC | 2.7 | | 5.5 | V | | 3 |
| Supply Current Conversion | ICC | | 400 | 700 | µA | Conversion | 3 |
| Supply Current Sleep | ICC | | 0.2 | 0.5 | µA | Sleep | 3 |
| High Level Input Voltage | VIH | 0.7 | | | VCC | printed as 0.7VCC | 3 |
| Low Level Input Voltage | VIL | | | 0.3 | VCC | printed as 0.3VCC | 3 |
| Hysteresis of Schmidt Trigger Inputs | VHYS | 0.05 | | | VCC | Note 3; printed as 0.05VCC | 3 |
| Low Level Output Voltage (SDA) | VOL | | | 0.4 | V | I = 3mA | 3 |
| Input Leakage | IIN | -1 | | 1 | µA | 0.1VCC ≤ VIN ≤ 0.9VCC | 3 |
| Capacitance for Each I/O Pin | CI | | | 10 | pF | | 3 |
| Capacitance Load for Each Bus Line | CB | | | 400 | pF | | 3 |
| IN DC Leakage Current (VIN = GND) | IDC_LEAK(VIN) | -10 | 1 | 10 | nA | VIN = GND (Note 8) | 3 |
| IN DC Leakage Current (VIN = VCC) | IDC_LEAK(VIN) | -10 | 1 | 10 | nA | VIN = VCC (Note 8) | 3 |
| REF+, REF- DC Leakage Current | IDC_LEAK(REF+, REF-) | -10 | 1 | 10 | nA | VREF = 5V (Note 8) | 3 |
| IN Sampling Capacitance | CIN | | 0.35 | | pF | | 3 |
| Input Sampling Current | ICONV | | 50 | | nA | Note 5 | 3 |
| Output Fall Time | tOF | | | 250 | ns | VIH(MIN) to VIL(MAX) Bus Load CB 10pF to 400pF (Note 6); min is 20 + 0.1CB | 4 |
| Input Spike Suppression | tSP | | | 50 | ns | | 4 |
| Supply Voltage (absolute maximum) | VCC | -0.3 | | 6 | V | | 2 |
| Analog Input Voltage (absolute maximum, lower limit) | VIN | -0.3 | | | V | upper limit is VCC + 0.3V | 2 |
| Reference Voltage (absolute maximum, lower limit) | VREF+, VREF- | -0.3 | | | V | upper limit is VCC + 0.3V | 2 |
| Digital Voltage (absolute maximum, lower limit) | VSDA, VSCL | -0.3 | | | V | upper limit is VCC + 0.3V | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Operating Temperature Range (LTC2451I) | | -40 | | 85 | °C | LTC2451I | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | TS8 package, C/I grade | 2 |
| Junction-to-Ambient Thermal Resistance | θJA | | 140 | | °C/W | TS8 package, C/I grade | 2 |
## CAD (KiCad official)
- Symbol: `LTC2451ITS8#TRPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-8`
- 3D model: TSOT-23-8 (KiCad packages3D, STEP)
- 3D model files: `ltc2451its8-trpbf-etched.step` / `ltc2451its8-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc2451its8-trpbf.step` / `ltc2451its8-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/2451fg.pdf) (20 pp, sha256 `5e3eba71951e62a0`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc2451its8-trpbf-datasheet.pdf)