main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc2451its8-trpbf: viewers · Ray
ltc2451its8-trpbf-etched.glb Publish 0.1.0 · Ray
ltc2451its8-trpbf-etched.step ltc2451its8-trpbf: factory component page (tier=mfr) · Ray
ltc2451its8-trpbf-hero.glb ltc2451its8-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc2451its8-trpbf-hero.overlay.json Publish 0.1.0 · Ray
ltc2451its8-trpbf.glb Publish 0.1.0 · Ray
ltc2451its8-trpbf.kicad_mod Publish 0.1.0 · Ray
ltc2451its8-trpbf.kicad_sym Publish 0.1.0 · Ray
ltc2451its8-trpbf.lbr Publish 0.1.0 · Ray
ltc2451its8-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 8 pins · Ray

LTC2451ITS8#TRPBF

Analog Devices · Analog To Digital Converters (ADCs) · TSOT-23-8

LTC2451ITS8#TRPBF from Analog Devices, in a TSOT-23-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground; connect to a ground plane through a low impedance connection.
2 REF- input Negative differential reference input; may be any value between GND and VCC as long as REF+ stays at least 2.5V more positive than REF-.
3 REF+ input Positive differential reference input; must remain at least 2.5V above REF- and sets the full-scale range with REF-.
4 VCC power_in Positive supply voltage (2.7V to 5.5V); bypass to GND with a 10µF capacitor in parallel with a low-inductance 0.1µF capacitor close to the part.
5 GND power_in Ground; connect to a ground plane through a low impedance connection.
6 IN input Analog input with a single-ended input range of VREF- to VREF+.
7 SCL input Serial clock input of the I2C interface; the LTC2451 acts only as a slave and accepts only an external clock.
8 SDA bidirectional Bidirectional I2C serial data line that outputs the conversion result; open-drain pull-down in data output mode requiring an external 1.7k pull-up to VCC, otherwise high impedance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-8
Category Data Converters
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution (No Missing Codes) 16 Bits Note 3 2
Integral Nonlinearity INL 2 10 LSB Note 4 2
Offset Error 30Hz Mode 0.08 0.5 mV 30Hz Mode 2
Offset Error 60Hz Mode 0.5 2 mV 60Hz Mode 2
Offset Error Drift 0.02 LSB/°C 2
Gain Error 0.01 0.02 % of FS 2
Gain Error Drift 0.02 LSB/°C 2
Transition Noise 1.4 µVRMS 2
Power Supply Rejection DC 30Hz Mode 80 dB DC, 30Hz Mode 2
Power Supply Rejection DC 60Hz Mode 80 dB DC, 60Hz Mode 2
Conversion Time 30Hz Mode tCONV 26 33.2 46 ms 30Hz Mode 3
Conversion Time 60Hz Mode tCONV 13 16.6 23 ms 60Hz Mode 3
SCL Clock Frequency fSCL 0 400 kHz 3
Hold Time (Repeated) START Condition tHD(SDA) 0.6 µs 3
LOW Period of the SCL Pin tLOW 1.3 µs 3
HIGH Period of the SCL Pin tHIGH 0.6 µs 3
Set-Up Time for a Repeated START Condition tSU(STA) 0.6 µs 3
Data Hold Time tHD(DAT) 0 0.9 µs 3
Data Set-Up Time tSU(DAT) 100 ns 3
Rise Time for SDA/SCL Signals tr 300 ns Note 6; min is 20 + 0.1CB 3
Fall Time for SDA/SCL Signals tf 300 ns Note 6; min is 20 + 0.1CB 3
Set-Up Time for STOP Condition tSU(STO) 0.6 µs 3
Bus Free Time Between a STOP and START Condition tBUF 1.3 µs 3
Supply Voltage VCC 2.7 5.5 V 3
Supply Current Conversion ICC 400 700 µA Conversion 3
Supply Current Sleep ICC 0.2 0.5 µA Sleep 3
High Level Input Voltage VIH 0.7 VCC printed as 0.7VCC 3
Low Level Input Voltage VIL 0.3 VCC printed as 0.3VCC 3
Hysteresis of Schmidt Trigger Inputs VHYS 0.05 VCC Note 3; printed as 0.05VCC 3
Low Level Output Voltage (SDA) VOL 0.4 V I = 3mA 3
Input Leakage IIN -1 1 µA 0.1VCC ≤ VIN ≤ 0.9VCC 3
Capacitance for Each I/O Pin CI 10 pF 3
Capacitance Load for Each Bus Line CB 400 pF 3
IN DC Leakage Current (VIN = GND) IDC_LEAK(VIN) -10 1 10 nA VIN = GND (Note 8) 3
IN DC Leakage Current (VIN = VCC) IDC_LEAK(VIN) -10 1 10 nA VIN = VCC (Note 8) 3
REF+, REF- DC Leakage Current IDC_LEAK(REF+, REF-) -10 1 10 nA VREF = 5V (Note 8) 3
IN Sampling Capacitance CIN 0.35 pF 3
Input Sampling Current ICONV 50 nA Note 5 3
Output Fall Time tOF 250 ns VIH(MIN) to VIL(MAX) Bus Load CB 10pF to 400pF (Note 6); min is 20 + 0.1CB 4
Input Spike Suppression tSP 50 ns 4
Supply Voltage (absolute maximum) VCC -0.3 6 V 2
Analog Input Voltage (absolute maximum, lower limit) VIN -0.3 V upper limit is VCC + 0.3V 2
Reference Voltage (absolute maximum, lower limit) VREF+, VREF- -0.3 V upper limit is VCC + 0.3V 2
Digital Voltage (absolute maximum, lower limit) VSDA, VSCL -0.3 V upper limit is VCC + 0.3V 2
Storage Temperature Range -65 150 °C 2
Operating Temperature Range (LTC2451I) -40 85 °C LTC2451I 2
Maximum Junction Temperature TJMAX 125 °C TS8 package, C/I grade 2
Junction-to-Ambient Thermal Resistance θJA 140 °C/W TS8 package, C/I grade 2

CAD (KiCad official)

  • Symbol: LTC2451ITS8#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-8
  • 3D model: TSOT-23-8 (KiCad packages3D, STEP)
  • 3D model files: ltc2451its8-trpbf-etched.step / ltc2451its8-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2451its8-trpbf.step / ltc2451its8-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 5e3eba71951e62a0, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF