Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LTC2309CF#PBF

Analog Devices · Analog To Digital Converters (ADCs) · TSSOP-20

LTC2309CF#PBF from Analog Devices, in a TSSOP-20. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 REFCOMP output Reference buffer output, nominal 4.096V, bypassed to GND with 10µF and 0.1µF ceramic capacitors in parallel; the buffer is disabled by grounding VREF, allowing REFCOMP to be overdriven externally.
2 GND power_in Ground; all GND pins must be connected to a solid ground plane.
3 VDD power_in 5V supply, range 4.75V to 5.25V, bypassed to GND with a 10µF ceramic capacitor in parallel with two 0.1µF ceramic capacitors, one close to each VDD pin.
4 AD0 input Chip address control pin, three-state (LOW, HIGH, floating) address bit for the I2C address (see Table 2).
5 AD1 input Chip address control pin, three-state (LOW, HIGH, floating) address bit for the I2C address (see Table 2).
6 SCL input Serial clock pin of the I2C interface; the device acts only as a slave and SCL accepts only an external serial clock.
7 SDA bidirectional Bidirectional I2C serial data line; high impedance during data input and open-drain output during data output, requiring a pull-up device to VDD.
8 GND power_in Ground; all GND pins must be connected to a solid ground plane.
9 GND power_in Ground; all GND pins must be connected to a solid ground plane.
10 VDD power_in 5V supply, range 4.75V to 5.25V, bypassed to GND with a 10µF ceramic capacitor in parallel with two 0.1µF ceramic capacitors, one close to each VDD pin.
11 CH0 input Channel 0 analog input, configurable as single-ended or differential via the analog input multiplexer.
12 CH1 input Channel 1 analog input, configurable as single-ended or differential via the analog input multiplexer.
13 CH2 input Channel 2 analog input, configurable as single-ended or differential via the analog input multiplexer.
14 CH3 input Channel 3 analog input, configurable as single-ended or differential via the analog input multiplexer.
15 CH4 input Channel 4 analog input, configurable as single-ended or differential via the analog input multiplexer.
16 CH5 input Channel 5 analog input, configurable as single-ended or differential via the analog input multiplexer.
17 CH6 input Channel 6 analog input, configurable as single-ended or differential via the analog input multiplexer.
18 CH7 input Channel 7 analog input, configurable as single-ended or differential via the analog input multiplexer.
19 COM input Common input, the reference point for all single-ended inputs; must be noise-free and connected to ground for unipolar conversions or midway between GND and REFCOMP for bipolar conversions.
20 VREF power_in 2.5V reference output, bypassed to GND with a minimum 2.2µF ceramic capacitor; the internal reference may be overdriven by an external 2.5V reference at this pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSSOP-20
Category Data Converters
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Resolution (No Missing Codes) 12 Bits 3
Integral Linearity Error INL -1 0.45 1 LSB Note 6; typ printed ±0.45 3
Differential Linearity Error DNL -1 0.35 1 LSB typ printed ±0.35 3
Bipolar Zero Error -8 1 8 LSB Note 7; typ printed ±1 3
Bipolar Zero Error Match -3 0.1 3 LSB typ printed ±0.1 3
Unipolar Zero Error -6 0.4 6 LSB Note 7; typ printed ±0.4 3
Unipolar Zero Error Match -1 0.2 1 LSB typ printed ±0.2 3
Bipolar Full-Scale Error -10 0.5 10 LSB External Reference (Note 8); typ printed ±0.5 3
Bipolar Full-Scale Error -9 0.4 9 LSB REFCOMP = 4.096V; typ printed ±0.4 3
Bipolar Full-Scale Error Match -3 0.4 3 LSB typ printed ±0.4 3
Unipolar Full-Scale Error (TSSOP) -12 0.5 12 LSB TSSOP External Reference (Note 8); typ printed ±0.5 3
Unipolar Full-Scale Error -6 0.3 6 LSB REFCOMP = 4.096V; typ printed ±0.3 3
Unipolar Full-Scale Error Match -2 0.3 2 LSB typ printed ±0.3 3
Bipolar Zero Error Drift 0.002 LSB/°C 3
Unipolar Zero Error Drift 0.002 LSB/°C 3
Bipolar Full-Scale Error Drift 0.05 LSB/°C External Reference 3
Unipolar Full-Scale Error Drift 0.05 LSB/°C External Reference 3
Absolute Input Range CH0 to CH7 (min) VIN+ -0.05 V Note 9; max is REFCOMP 3
Analog Input Leakage Current IIN -1 1 µA 3
Analog Input Capacitance, Sample Mode CIN 55 pF Sample Mode 3
Analog Input Capacitance, Hold Mode CIN 5 pF Hold Mode 3
Input Common Mode Rejection Ratio CMRR 70 dB 3
Signal-to-(Noise + Distortion) Ratio SINAD 71 73.3 dB fIN = 1kHz 3
Signal-to-Noise Ratio SNR 71 73.4 dB fIN = 1kHz 3
Total Harmonic Distortion THD -88 -77 dB fIN = 1kHz, First 5 Harmonics 3
Spurious Free Dynamic Range SFDR 79 90 dB fIN = 1kHz 3
VREF Output Voltage (TSSOP) VREF 2.46 2.5 2.54 V IOUT = 0 (TSSOP) 4
VREF Output Tempco 25 ppm/°C IOUT = 0 4
VREF Output Impedance 8 kΩ -0.1mA ≤ IOUT ≤ 0.1mA 4
VREFCOMP Output Voltage VREFCOMP 4.096 V IOUT = 0 4
VREF Line Regulation 0.8 mV/V VDD = 4.75V to 5.25V 4
High Level Input Voltage VIH 2.85 V 4
Low Level Input Voltage VIL 1.5 V 4
High Level Input Voltage for Address Pins A1, A0 VIHA 4.75 V 4
Low Level Input Voltage for Address Pins A1, A0 VILA 0.25 V 4
Resistance from A1, A0 to VDD to Set Address Bit to 1 RINH 10 kΩ 4
Resistance from A1, A0 to GND to Set Address Bit to 0 RINL 10 kΩ 4
Resistance from A1, A0 to GND or VDD to Set Address Bit to Float RINF 2 MΩ 4
Digital Input Current II -10 10 µA VIN = VDD 4
Hysteresis of Schmitt Trigger Inputs VHYS 0.25 V Note 9 4
Low Level Output Voltage (SDA) VOL 0.4 V I = 3mA 4
Output Fall Time tOF 250 ns VH to VIL(MAX) (Note 12); min printed 20 + 0.1CB 4
Input Spike Suppression tSP 50 ns 4
External Capacitance Load On-Chip Address Pins for Valid Float CCAX 10 pF A1, A0 4
Supply Voltage VDD 4.75 5 5.25 V 4
Supply Current IDD 2.3 3 mA 14ksps Sample Rate 4
Supply Current, Nap Mode IDD 210 350 µA SLP Bit = 0, Conversion Done 4
Supply Current, Sleep Mode IDD 7 15 µA SLP Bit = 1, Conversion Done 4
Power Dissipation PD 11.5 15 mW 14ksps Sample Rate 4
Power Dissipation, Nap Mode PD 1.05 1.75 mW SLP Bit = 0, Conversion Done 4
Power Dissipation, Sleep Mode PD 35 75 µW SLP Bit = 1, Conversion Done 4
SCL Clock Frequency fSCL 400 kHz 5
Hold Time (Repeated) START Condition tHD(SDA) 0.6 µs 5
LOW Period of the SCL Pin tLOW 1.3 µs 5
HIGH Period of the SCL Pin tHIGH 0.6 µs 5
Set-Up Time for a Repeated START Condition tSU(STA) 0.6 µs 5
Data Hold Time tHD(DAT) 0 0.9 µs 5
Data Set-Up Time tSU(DAT) 100 ns 5
Rise Time for SDA/SCL Signals tr 300 ns Note 12; min printed 20 + 0.1CB 5
Fall Time for SDA/SCL Signals tf 300 ns Note 12; min printed 20 + 0.1CB 5
Set-Up Time for STOP Condition tSU(STO) 0.6 µs 5
Bus Free Time Between a STOP and START Condition tBUF 1.3 µs 5
Conversion Time tCONV 1.3 1.8 µs Note 9 5
Acquisition Time tACQ 240 ns Note 9 5
Throughput Rate (Successive Reads) fSMPL 14 ksps 5
Supply Voltage (absolute maximum) VDD -0.3 6 V 2
Power Dissipation (absolute maximum) 500 mW 2
Storage Temperature Range -65 150 °C 2
Operating Temperature Range LTC2309C 0 70 °C LTC2309C 2
Junction-to-Ambient Thermal Resistance θJA 90 °C/W 20-lead TSSOP 2

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LTC2309CF#PBF
  • Footprint: Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm
  • 3D model: TSSOP-20, generated on the KiCad land (body 4.4 x 6.5 mm, terminals on the pads, 1.1 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ltc2309cf-etched.step / ltc2309cf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc2309cf.step / ltc2309cf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (26 pp, sha256 a8c486f7781eab3e, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF