main
Ray
Publish 0.1.0
ba9414a
LTC1983ES6-3#TRPBF
ADI(亚德诺) · IC · TSOT-23-6
LTC1983ES6-3#TRPBF from ADI(亚德诺), in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Charge pump input voltage, which may be between 2.3V and 5.5V and should be bypassed with a 4.7µF or greater low ESR capacitor placed as close as possible to the pin. |
| 2 | VOUT | power_out | Regulated output voltage of the IC, which should be bypassed with a 4.7µF or greater low ESR capacitor placed as close as possible to the pin. |
| 3 | C+ | passive | Charge pump flying capacitor positive terminal, switched between VIN and GND and connected to VCC during shutdown. |
| 4 | C- | passive | Charge pump flying capacitor negative terminal, switched between GND and VOUT and connected to GND during shutdown. |
| 5 | GND | power_in | Signal and power ground for the 6-pin SOT-23 package, which should be tied to a ground plane for best performance. |
| 6 | SHDN | input | Shutdown input where grounding this pin shuts down the IC and tying it to VIN enables it, and it must not be pulled above VIN or below GND. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ADI(亚德诺) |
| Package | TSOT-23-6 |
| Category | |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operating Voltage (Regulated Output Mode) (LTC1983-3) | VIN | 3 | 5.5 | V | 2 | ||
| VOUT (LTC1983-3) | VOUT | -2.88 | -3 | -3.12 | V | VIN >= 3.3V, IOUT <= 25mA | 2 |
| VIN Operating Current | 25 | 60 | µA | VIN <= 5.5V, IOUT = 0µA, SHDN = VIN | 2 | ||
| VIN Shutdown Current | 0.1 | 1 | µA | SHDN = 0V, VIN <= 5.5V | 2 | ||
| SHDN Input High | 1.1 | V | 3 | ||||
| SHDN Input Low | 0.3 | V | 3 | ||||
| SHDN Input Current | VSHDN | 2.2 | 4 | µA | VSHDN = 5.5V | 3 | |
| Output Ripple | 60 | mVP-P | 3.3 <= VIN <= 5.5 | 2 | |||
| VIN to GND | VIN | -0.3 | 6 | V | 2 | ||
| SHDN Voltage | SHDN | -0.3 | 6 | V | 2 | ||
| IOUT Max | IOUT | 125 | mA | 2 | |||
| Storage Temperature Range | -65 | 125 | °C | 2 | |||
| Operating Temperature Range | -40 | 85 | °C | Note 2 | 2 | ||
| VIN Operating Voltage | VIN | 2.3 | 5.5 | V | Charge pump input voltage (Pin Functions) | 6 | |
| Open-Loop Output Impedance (LTC1983-3) | ROUT | 11 | Ω | VIN = 3.3V, VOUT = -3V | 2 | ||
| Oscillator Frequency (Non Burst Mode Operation) | 900 | kHz | 3 | ||||
| Thermal Resistance Junction to Ambient | θJA | 256 | °C/W | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | LTC1983ES6-3#PBF LTC1983ES6-3#TRPBF LTPC 6-Lead Plastic TSOT-23 -40°C to 85°C | 2 |
CAD (KiCad official)
- Symbol:
LTC1983ES6-3#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
ltc1983es6-3-trpbf-etched.step/ltc1983es6-3-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1983es6-3-trpbf.step/ltc1983es6-3-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: ADI(亚德诺) datasheet (14 pp, sha256
356ba1ba47872544, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC1983ES6-3#TRPBF
**ADI(亚德诺)** · IC · TSOT-23-6
LTC1983ES6-3#TRPBF from ADI(亚德诺), in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VIN | power_in | Charge pump input voltage, which may be between 2.3V and 5.5V and should be bypassed with a 4.7µF or greater low ESR capacitor placed as close as possible to the pin. |
| 2 | VOUT | power_out | Regulated output voltage of the IC, which should be bypassed with a 4.7µF or greater low ESR capacitor placed as close as possible to the pin. |
| 3 | C+ | passive | Charge pump flying capacitor positive terminal, switched between VIN and GND and connected to VCC during shutdown. |
| 4 | C- | passive | Charge pump flying capacitor negative terminal, switched between GND and VOUT and connected to GND during shutdown. |
| 5 | GND | power_in | Signal and power ground for the 6-pin SOT-23 package, which should be tied to a ground plane for best performance. |
| 6 | SHDN | input | Shutdown input where grounding this pin shuts down the IC and tying it to VIN enables it, and it must not be pulled above VIN or below GND. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | ADI(亚德诺) |
| Package | TSOT-23-6 |
| Category | |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operating Voltage (Regulated Output Mode) (LTC1983-3) | VIN | 3 | | 5.5 | V | | 2 |
| VOUT (LTC1983-3) | VOUT | -2.88 | -3 | -3.12 | V | VIN >= 3.3V, IOUT <= 25mA | 2 |
| VIN Operating Current | | | 25 | 60 | µA | VIN <= 5.5V, IOUT = 0µA, SHDN = VIN | 2 |
| VIN Shutdown Current | | | 0.1 | 1 | µA | SHDN = 0V, VIN <= 5.5V | 2 |
| SHDN Input High | | 1.1 | | | V | | 3 |
| SHDN Input Low | | | | 0.3 | V | | 3 |
| SHDN Input Current | VSHDN | | 2.2 | 4 | µA | VSHDN = 5.5V | 3 |
| Output Ripple | | | | 60 | mVP-P | 3.3 <= VIN <= 5.5 | 2 |
| VIN to GND | VIN | -0.3 | | 6 | V | | 2 |
| SHDN Voltage | SHDN | -0.3 | | 6 | V | | 2 |
| IOUT Max | IOUT | | | 125 | mA | | 2 |
| Storage Temperature Range | | -65 | | 125 | °C | | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | Note 2 | 2 |
| VIN Operating Voltage | VIN | 2.3 | | 5.5 | V | Charge pump input voltage (Pin Functions) | 6 |
| Open-Loop Output Impedance (LTC1983-3) | ROUT | | 11 | | Ω | VIN = 3.3V, VOUT = -3V | 2 |
| Oscillator Frequency (Non Burst Mode Operation) | | | 900 | | kHz | | 3 |
| Thermal Resistance Junction to Ambient | θJA | | 256 | | °C/W | | 2 |
| Maximum Junction Temperature | TJMAX | | | 125 | °C | | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | | LTC1983ES6-3#PBF LTC1983ES6-3#TRPBF LTPC 6-Lead Plastic TSOT-23 -40°C to 85°C | 2 |
## CAD (KiCad official)
- Symbol: `LTC1983ES6-3#TRPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `ltc1983es6-3-trpbf-etched.step` / `ltc1983es6-3-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc1983es6-3-trpbf.step` / `ltc1983es6-3-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [ADI(亚德诺) datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/1983fc.pdf) (14 pp, sha256 `356ba1ba47872544`, retrieved 2026-11-02, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc1983es6-3-trpbf-datasheet.pdf)