main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc1983es6-3-trpbf: viewers · Ray
ltc1983es6-3-trpbf-etched.glb Publish 0.1.0 · Ray
ltc1983es6-3-trpbf-etched.step ltc1983es6-3-trpbf: factory component page (tier=mfr) · Ray
ltc1983es6-3-trpbf-hero.glb ltc1983es6-3-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc1983es6-3-trpbf-hero.overlay.json Publish 0.1.0 · Ray
ltc1983es6-3-trpbf.glb Publish 0.1.0 · Ray
ltc1983es6-3-trpbf.kicad_mod Publish 0.1.0 · Ray
ltc1983es6-3-trpbf.kicad_sym Publish 0.1.0 · Ray
ltc1983es6-3-trpbf.lbr Publish 0.1.0 · Ray
ltc1983es6-3-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

LTC1983ES6-3#TRPBF

ADI(亚德诺) · IC · TSOT-23-6

LTC1983ES6-3#TRPBF from ADI(亚德诺), in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in Charge pump input voltage, which may be between 2.3V and 5.5V and should be bypassed with a 4.7µF or greater low ESR capacitor placed as close as possible to the pin.
2 VOUT power_out Regulated output voltage of the IC, which should be bypassed with a 4.7µF or greater low ESR capacitor placed as close as possible to the pin.
3 C+ passive Charge pump flying capacitor positive terminal, switched between VIN and GND and connected to VCC during shutdown.
4 C- passive Charge pump flying capacitor negative terminal, switched between GND and VOUT and connected to GND during shutdown.
5 GND power_in Signal and power ground for the 6-pin SOT-23 package, which should be tied to a ground plane for best performance.
6 SHDN input Shutdown input where grounding this pin shuts down the IC and tying it to VIN enables it, and it must not be pulled above VIN or below GND.

Key specifications

Parameter Value
Manufacturer ADI(亚德诺)
Package TSOT-23-6
Category
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Operating Voltage (Regulated Output Mode) (LTC1983-3) VIN 3 5.5 V 2
VOUT (LTC1983-3) VOUT -2.88 -3 -3.12 V VIN >= 3.3V, IOUT <= 25mA 2
VIN Operating Current 25 60 µA VIN <= 5.5V, IOUT = 0µA, SHDN = VIN 2
VIN Shutdown Current 0.1 1 µA SHDN = 0V, VIN <= 5.5V 2
SHDN Input High 1.1 V 3
SHDN Input Low 0.3 V 3
SHDN Input Current VSHDN 2.2 4 µA VSHDN = 5.5V 3
Output Ripple 60 mVP-P 3.3 <= VIN <= 5.5 2
VIN to GND VIN -0.3 6 V 2
SHDN Voltage SHDN -0.3 6 V 2
IOUT Max IOUT 125 mA 2
Storage Temperature Range -65 125 °C 2
Operating Temperature Range -40 85 °C Note 2 2
VIN Operating Voltage VIN 2.3 5.5 V Charge pump input voltage (Pin Functions) 6
Open-Loop Output Impedance (LTC1983-3) ROUT 11 Ω VIN = 3.3V, VOUT = -3V 2
Oscillator Frequency (Non Burst Mode Operation) 900 kHz 3
Thermal Resistance Junction to Ambient θJA 256 °C/W 2
Maximum Junction Temperature TJMAX 125 °C 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC LTC1983ES6-3#PBF LTC1983ES6-3#TRPBF LTPC 6-Lead Plastic TSOT-23 -40°C to 85°C 2

CAD (KiCad official)

  • Symbol: LTC1983ES6-3#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: ltc1983es6-3-trpbf-etched.step / ltc1983es6-3-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1983es6-3-trpbf.step / ltc1983es6-3-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: ADI(亚德诺) datasheet (14 pp, sha256 356ba1ba47872544, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF