main
Ray
Publish 0.1.0
2ace562
LTC1844ES5-1.8#TRMPBF
Analog Devices · Linear Voltage Regulators (LDO) · TSOT-23-5
LTC1844ES5-1.8#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power input for the regulator and load, operating from 1.6V to 6.5V, withstands reverse voltages down to -7V, and should be bypassed with 0.1µF to 1µF if far from bulk capacitance. |
| 2 | GND | power_in | Ground and heat sink pin, to be soldered to a ground plane or large pad to maximize heat dissipation. |
| 3 | SHDN | input | Active-low shutdown input with a typical pin current under 10nA, which cannot be left floating and must be tied to IN if unused (through 10k to 1M if reverse-battery protection is desired). |
| 4 | BYP | passive | Noise bypass pin where a small low-leakage capacitor to ground lowers output noise (larger values give lower noise but slower power-up), and it must be left unconnected if not used. |
| 5 | OUT | power_out | Regulated 1.8V output supplying up to 150mA to the load, requiring a minimum 1µF output capacitor for stability. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.6 | 6.5 | V | full temperature range | 2 | |
| Quiescent Current | IIN | 35 | 55 | µA | SHDN = VIN | 2 | |
| Quiescent Current (full temp) | IIN | 80 | µA | SHDN = VIN, over full operating temperature range | 2 | ||
| VIN Shutdown Supply Current | IINSHDN | 0.01 | 1 | µA | SHDN = 0V | 2 | |
| Regulated Output Voltage LTC1844-1.8 | VOUT% | -1.5 | 1.5 | %VOUT | VIN = 2.3V to 6.5V, IOUT = 0mA to 150mA | 2 | |
| Regulated Output Voltage LTC1844-1.8 (full temp) | VOUT% | -1.75 | 1.75 | %VOUT | VIN = 2.3V to 6.5V, IOUT = 0mA to 150mA, full temperature range | 2 | |
| Line Regulation LTC1844-1.8 | ΔVLNR | 4 | 20 | mV | VIN = 2.2V to 6.5V, IL = 1mA, full temperature range | 3 | |
| Line Regulation LTC1844-1.8 (full temp) | ΔVLNR | 4 | 30 | mV | VIN = 1.9V to 6.5V, IL = 1mA, full temperature range | 3 | |
| Load Regulation LTC1844-1.8 | ΔVLDR | 9 | 20 | mV | VIN = 2.3V, IOUT = 0mA to 150mA, full temperature range | 3 | |
| Dropout Voltage LTC1844-1.8 | ΔVDO | 85 | 120 | mV | IOUT = 50mA, full temperature range | 3 | |
| Dropout Voltage LTC1844-1.8 | ΔVDO | 230 | 300 | mV | IOUT = 150mA, full temperature range | 3 | |
| Output Current Limit | ILIM | 160 | 350 | mA | full temperature range | 4 | |
| Output Voltage Noise | en | 60 | µVRMS | f = 10Hz to 100kHz, CBP = 0.1µF, COUT = 10µF, IL = 150mA | 4 | ||
| Output Voltage Noise | en | 65 | µVRMS | f = 10Hz to 100kHz, CBP = 0.1µF, COUT = 1µF, IL = 150mA | 4 | ||
| SHDN Input Threshold | VSHDN | 0.35 | 0.65 | 0.9 | V | full temperature range | 4 |
| Shutdown Exit Delay | tDELAY | 70 | 100 | µs | CBP = 0.01µF, COUT = 1µF, No load | 4 | |
| Shutdown Exit Delay (full temp) | tDELAY | 200 | µs | CBP = 0.01µF, COUT = 1µF, No load, full temperature range | 4 | ||
| Thermal Shutdown Limit | TSHDN | 155 | °C | 4 | |||
| Thermal Shutdown Hysteresis | ΔTSHDN | 10 | °C | 4 | |||
| Input Reverse Leakage Current | IIRL | 200 | 500 | µA | VIN = -5V, VOUT = 0V, full temperature range | 4 | |
| Output Reverse Leakage Current | IORL | 0.01 | 0.1 | µA | VIN = 0V, VOUT = VOUT(NOMINAL) | 4 | |
| Output Reverse Leakage Current (full temp) | IORL | 1.2 | µA | VIN = 0V, VOUT = VOUT(NOMINAL), full temperature range | 4 | ||
| Start-Up Overshoot | VOSH | 2 | %VOUT | RL = 1k, SHDN Rise Time ≤ 1µs | 4 | ||
| Output Ripple Rejection | VRP | 50 | dB | (VIN, VOUT) = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 100mA | 4 | ||
| Supply Voltage (IN) | VIN | -7 | 7 | V | 2 | ||
| Input Voltage SHDN, BYP, ADJ | -0.3 | 7 | V | 2 | |||
| Output Voltage OUT | -0.3 | 7 | V | 2 | |||
| OUT to IN | -7 | 7 | V | 2 | |||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | Notes 2, 10 | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 2 | ||||
| Thermal Resistance Junction-to-Ambient | θJA | 250 | °C/W | S5 package, order table | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 90 | °C/W | S5 package, order table | 2 |
CAD (KiCad official)
- Symbol:
LTC1844ES5-1.8#TRMPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-5 - 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ltc1844es5-1-8-trmpbf-etched.step/ltc1844es5-1-8-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1844es5-1-8-trmpbf.step/ltc1844es5-1-8-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (12 pp, sha256
286a8caaef25ce19, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LTC1844ES5-1.8#TRMPBF
**Analog Devices** · Linear Voltage Regulators (LDO) · TSOT-23-5
LTC1844ES5-1.8#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN | power_in | Power input for the regulator and load, operating from 1.6V to 6.5V, withstands reverse voltages down to -7V, and should be bypassed with 0.1µF to 1µF if far from bulk capacitance. |
| 2 | GND | power_in | Ground and heat sink pin, to be soldered to a ground plane or large pad to maximize heat dissipation. |
| 3 | SHDN | input | Active-low shutdown input with a typical pin current under 10nA, which cannot be left floating and must be tied to IN if unused (through 10k to 1M if reverse-battery protection is desired). |
| 4 | BYP | passive | Noise bypass pin where a small low-leakage capacitor to ground lowers output noise (larger values give lower noise but slower power-up), and it must be left unconnected if not used. |
| 5 | OUT | power_out | Regulated 1.8V output supplying up to 150mA to the load, requiring a minimum 1µF output capacitor for stability. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-5 |
| Category | Power Supply Chip |
| Pins | 5 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Voltage | VIN | 1.6 | | 6.5 | V | full temperature range | 2 |
| Quiescent Current | IIN | | 35 | 55 | µA | SHDN = VIN | 2 |
| Quiescent Current (full temp) | IIN | | | 80 | µA | SHDN = VIN, over full operating temperature range | 2 |
| VIN Shutdown Supply Current | IINSHDN | | 0.01 | 1 | µA | SHDN = 0V | 2 |
| Regulated Output Voltage LTC1844-1.8 | VOUT% | -1.5 | | 1.5 | %VOUT | VIN = 2.3V to 6.5V, IOUT = 0mA to 150mA | 2 |
| Regulated Output Voltage LTC1844-1.8 (full temp) | VOUT% | -1.75 | | 1.75 | %VOUT | VIN = 2.3V to 6.5V, IOUT = 0mA to 150mA, full temperature range | 2 |
| Line Regulation LTC1844-1.8 | ΔVLNR | | 4 | 20 | mV | VIN = 2.2V to 6.5V, IL = 1mA, full temperature range | 3 |
| Line Regulation LTC1844-1.8 (full temp) | ΔVLNR | | 4 | 30 | mV | VIN = 1.9V to 6.5V, IL = 1mA, full temperature range | 3 |
| Load Regulation LTC1844-1.8 | ΔVLDR | | 9 | 20 | mV | VIN = 2.3V, IOUT = 0mA to 150mA, full temperature range | 3 |
| Dropout Voltage LTC1844-1.8 | ΔVDO | | 85 | 120 | mV | IOUT = 50mA, full temperature range | 3 |
| Dropout Voltage LTC1844-1.8 | ΔVDO | | 230 | 300 | mV | IOUT = 150mA, full temperature range | 3 |
| Output Current Limit | ILIM | 160 | | 350 | mA | full temperature range | 4 |
| Output Voltage Noise | en | | 60 | | µVRMS | f = 10Hz to 100kHz, CBP = 0.1µF, COUT = 10µF, IL = 150mA | 4 |
| Output Voltage Noise | en | | 65 | | µVRMS | f = 10Hz to 100kHz, CBP = 0.1µF, COUT = 1µF, IL = 150mA | 4 |
| SHDN Input Threshold | VSHDN | 0.35 | 0.65 | 0.9 | V | full temperature range | 4 |
| Shutdown Exit Delay | tDELAY | | 70 | 100 | µs | CBP = 0.01µF, COUT = 1µF, No load | 4 |
| Shutdown Exit Delay (full temp) | tDELAY | | | 200 | µs | CBP = 0.01µF, COUT = 1µF, No load, full temperature range | 4 |
| Thermal Shutdown Limit | TSHDN | | 155 | | °C | | 4 |
| Thermal Shutdown Hysteresis | ΔTSHDN | | 10 | | °C | | 4 |
| Input Reverse Leakage Current | IIRL | | 200 | 500 | µA | VIN = -5V, VOUT = 0V, full temperature range | 4 |
| Output Reverse Leakage Current | IORL | | 0.01 | 0.1 | µA | VIN = 0V, VOUT = VOUT(NOMINAL) | 4 |
| Output Reverse Leakage Current (full temp) | IORL | | | 1.2 | µA | VIN = 0V, VOUT = VOUT(NOMINAL), full temperature range | 4 |
| Start-Up Overshoot | VOSH | | 2 | | %VOUT | RL = 1k, SHDN Rise Time ≤ 1µs | 4 |
| Output Ripple Rejection | VRP | | 50 | | dB | (VIN, VOUT) = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 100mA | 4 |
| Supply Voltage (IN) | VIN | -7 | | 7 | V | | 2 |
| Input Voltage SHDN, BYP, ADJ | | -0.3 | | 7 | V | | 2 |
| Output Voltage OUT | | -0.3 | | 7 | V | | 2 |
| OUT to IN | | -7 | | 7 | V | | 2 |
| Operating Junction Temperature Range | TJ | -40 | | 125 | °C | Notes 2, 10 | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature (Soldering, 10 sec) | | | | 300 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 250 | | °C/W | S5 package, order table | 2 |
| Thermal Resistance Junction-to-Case | θJC | | 90 | | °C/W | S5 package, order table | 2 |
## CAD (KiCad official)
- Symbol: `LTC1844ES5-1.8#TRMPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-5`
- 3D model: TSOT-23-5 (KiCad packages3D, STEP)
- 3D model files: `ltc1844es5-1-8-trmpbf-etched.step` / `ltc1844es5-1-8-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `ltc1844es5-1-8-trmpbf.step` / `ltc1844es5-1-8-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/1844fa.pdf) (12 pp, sha256 `286a8caaef25ce19`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/ltc1844es5-1-8-trmpbf-datasheet.pdf)