main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ltc1844es5-1-8-trmpbf: viewers · Ray
ltc1844es5-1-8-trmpbf-etched.glb Publish 0.1.0 · Ray
ltc1844es5-1-8-trmpbf-etched.step ltc1844es5-1-8-trmpbf: factory component page (tier=mfr) · Ray
ltc1844es5-1-8-trmpbf-hero.glb ltc1844es5-1-8-trmpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
ltc1844es5-1-8-trmpbf-hero.overlay.json Publish 0.1.0 · Ray
ltc1844es5-1-8-trmpbf.glb Publish 0.1.0 · Ray
ltc1844es5-1-8-trmpbf.kicad_mod Publish 0.1.0 · Ray
ltc1844es5-1-8-trmpbf.kicad_sym Publish 0.1.0 · Ray
ltc1844es5-1-8-trmpbf.lbr Publish 0.1.0 · Ray
ltc1844es5-1-8-trmpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 5 pins · Ray

LTC1844ES5-1.8#TRMPBF

Analog Devices · Linear Voltage Regulators (LDO) · TSOT-23-5

LTC1844ES5-1.8#TRMPBF from Analog Devices, in a TSOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN power_in Power input for the regulator and load, operating from 1.6V to 6.5V, withstands reverse voltages down to -7V, and should be bypassed with 0.1µF to 1µF if far from bulk capacitance.
2 GND power_in Ground and heat sink pin, to be soldered to a ground plane or large pad to maximize heat dissipation.
3 SHDN input Active-low shutdown input with a typical pin current under 10nA, which cannot be left floating and must be tied to IN if unused (through 10k to 1M if reverse-battery protection is desired).
4 BYP passive Noise bypass pin where a small low-leakage capacitor to ground lowers output noise (larger values give lower noise but slower power-up), and it must be left unconnected if not used.
5 OUT power_out Regulated 1.8V output supplying up to 150mA to the load, requiring a minimum 1µF output capacitor for stability.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-5
Category Power Supply Chip
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Voltage VIN 1.6 6.5 V full temperature range 2
Quiescent Current IIN 35 55 µA SHDN = VIN 2
Quiescent Current (full temp) IIN 80 µA SHDN = VIN, over full operating temperature range 2
VIN Shutdown Supply Current IINSHDN 0.01 1 µA SHDN = 0V 2
Regulated Output Voltage LTC1844-1.8 VOUT% -1.5 1.5 %VOUT VIN = 2.3V to 6.5V, IOUT = 0mA to 150mA 2
Regulated Output Voltage LTC1844-1.8 (full temp) VOUT% -1.75 1.75 %VOUT VIN = 2.3V to 6.5V, IOUT = 0mA to 150mA, full temperature range 2
Line Regulation LTC1844-1.8 ΔVLNR 4 20 mV VIN = 2.2V to 6.5V, IL = 1mA, full temperature range 3
Line Regulation LTC1844-1.8 (full temp) ΔVLNR 4 30 mV VIN = 1.9V to 6.5V, IL = 1mA, full temperature range 3
Load Regulation LTC1844-1.8 ΔVLDR 9 20 mV VIN = 2.3V, IOUT = 0mA to 150mA, full temperature range 3
Dropout Voltage LTC1844-1.8 ΔVDO 85 120 mV IOUT = 50mA, full temperature range 3
Dropout Voltage LTC1844-1.8 ΔVDO 230 300 mV IOUT = 150mA, full temperature range 3
Output Current Limit ILIM 160 350 mA full temperature range 4
Output Voltage Noise en 60 µVRMS f = 10Hz to 100kHz, CBP = 0.1µF, COUT = 10µF, IL = 150mA 4
Output Voltage Noise en 65 µVRMS f = 10Hz to 100kHz, CBP = 0.1µF, COUT = 1µF, IL = 150mA 4
SHDN Input Threshold VSHDN 0.35 0.65 0.9 V full temperature range 4
Shutdown Exit Delay tDELAY 70 100 µs CBP = 0.01µF, COUT = 1µF, No load 4
Shutdown Exit Delay (full temp) tDELAY 200 µs CBP = 0.01µF, COUT = 1µF, No load, full temperature range 4
Thermal Shutdown Limit TSHDN 155 °C 4
Thermal Shutdown Hysteresis ΔTSHDN 10 °C 4
Input Reverse Leakage Current IIRL 200 500 µA VIN = -5V, VOUT = 0V, full temperature range 4
Output Reverse Leakage Current IORL 0.01 0.1 µA VIN = 0V, VOUT = VOUT(NOMINAL) 4
Output Reverse Leakage Current (full temp) IORL 1.2 µA VIN = 0V, VOUT = VOUT(NOMINAL), full temperature range 4
Start-Up Overshoot VOSH 2 %VOUT RL = 1k, SHDN Rise Time ≤ 1µs 4
Output Ripple Rejection VRP 50 dB (VIN, VOUT) = 1V (Avg), VRIPPLE = 0.5VP-P, fRIPPLE = 120Hz, ILOAD = 100mA 4
Supply Voltage (IN) VIN -7 7 V 2
Input Voltage SHDN, BYP, ADJ -0.3 7 V 2
Output Voltage OUT -0.3 7 V 2
OUT to IN -7 7 V 2
Operating Junction Temperature Range TJ -40 125 °C Notes 2, 10 2
Storage Temperature Range -65 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C 2
Thermal Resistance Junction-to-Ambient θJA 250 °C/W S5 package, order table 2
Thermal Resistance Junction-to-Case θJC 90 °C/W S5 package, order table 2

CAD (KiCad official)

  • Symbol: LTC1844ES5-1.8#TRMPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-5
  • 3D model: TSOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ltc1844es5-1-8-trmpbf-etched.step / ltc1844es5-1-8-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1844es5-1-8-trmpbf.step / ltc1844es5-1-8-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (12 pp, sha256 286a8caaef25ce19, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF