main
History Download
Ray Publish 0.1.0 7d0fab7

LTC1778EGN#TRPBF

Analog Devices · DC-DC Controllers · SSOP-16-150mil

LTC1778EGN#TRPBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RUN/SS input Run control and soft-start pin with a 0.8V to 2V start threshold (1.5V typ), 1.2µA typ soft-start charge current, and an absolute maximum of 7V to -0.3V.
2 PGOOD output Power good output voltage monitor (LTC1778 only) that trips at ±7.5% typ on VFB, pulls low to 0.15V typ (0.4V max) at 5mA, and has an absolute maximum of 7V to -0.3V.
3 VRNG input Current sense range input; VRNG = 0V, 1V or INTVCC sets the maximum current sense threshold to 93mV, 133mV or 186mV typ, with an absolute maximum of INTVCC + 0.3V to -0.3V.
4 FCB input Forced continuous control pin with a 0.8V typ threshold (0.76V to 0.84V) and -2µA typ pin current at 0.8V, with an absolute maximum of INTVCC + 0.3V to -0.3V.
5 ITH output Error amplifier compensation node (gm 1.7mS typ) with an absolute maximum of 2.7V to -0.3V.
6 SGND power_in Signal ground for the small-signal analog circuitry.
7 ION input On-time current input that sets switching frequency through an external resistor to VIN, with an absolute maximum of 36V to -0.3V.
8 VFB input Feedback input to the error amplifier with a 0.800V reference (±1% typ), -5nA to ±50nA input current, and an absolute maximum of 2.7V to -0.3V.
9 EXTVCC power_in External supply input for INTVCC that switches over at 4.5V to 4.7V rising with 200mV hysteresis, with an absolute maximum of 7V to -0.3V.
10 VIN power_in Main input supply operating from 4V to 36V, with an absolute maximum of 36V to -0.3V.
11 INTVCC power_out Internal 5V regulator output (4.7V to 5.3V) that powers the gate drivers, with peak current of 2A and RMS current of 50mA absolute maximum.
12 BG output Bottom-side N-channel MOSFET gate driver output with peak current of 2A and RMS current of 50mA absolute maximum.
13 PGND power_in Power ground for the bottom-side driver, also used for valley current sensing against SW (VPGND - VSW threshold).
14 SW passive Switching node connection to the inductor and MOSFETs, with an absolute maximum of 36V to -5V.
15 TG output Top-side N-channel MOSFET gate driver output with peak current of 2A and RMS current of 50mA absolute maximum.
16 BOOST power_in Boosted topside driver supply with an absolute maximum of 42V to -0.3V, and (BOOST - SW) limited to 7V to -0.3V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Power Supply Chip
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback Reference Voltage (LTC1778E) VFB 0.792 0.8 0.808 V ITH = 1.2V (Note 3) 2
Input DC Supply Current Normal IQ 900 2000 µA Normal 2
Shutdown Supply Current IQ 15 30 µA Shutdown 2
Feedback Voltage Load Regulation ΔVFB(LOADREG) -0.05 -0.3 % ITH = 0.5V to 1.9V (Note 3) 2
Feedback Input Current IFB -5 50 nA VFB = 0.8V 2
Error Amplifier Transconductance gm(EA) 1.4 1.7 2 mS ITH = 1.2V (Note 3) 2
Forced Continuous Threshold VFCB 0.76 0.8 0.84 V 2
Forced Continuous Pin Current IFCB -1 -2 µA VFCB = 0.8V 2
Minimum On-Time tON(MIN) 50 100 ns ION = 180µA 2
Minimum Off-Time tOFF(MIN) 250 400 ns ION = 30µA 3
Maximum Current Sense Threshold VSENSE(MAX) 113 133 153 mV VRNG = 1V, VFB = 0.76V 3
Max Current Sense Threshold (VPGND, VSW) VPGND, VSW 79 93 107 mV VRNG = 0V, VFB = 0.76V 3
Max Current Sense Threshold (VPGND, VSW) VPGND, VSW 158 186 214 mV VRNG = INTVCC, VFB = 0.76V 3
Output Overvoltage Fault Threshold ΔVFB(OV) 5.5 7.5 9.5 % 3
Output Undervoltage Fault Threshold VFB(UV) 520 600 680 mV 3
RUN Pin Start Threshold VRUN/SS(ON) 0.8 1.5 2 V 3
RUN Pin Latchoff Enable Threshold VRUN/SS(LE) 4 4.5 V RUN/SS Pin Rising 3
RUN Pin Latchoff Threshold VRUN/SS(LT) 3.5 4.2 V RUN/SS Pin Falling 3
Soft-Start Charge Current IRUN/SS(C) -0.5 -1.2 -3 µA VRUN/SS = 0V 3
Soft-Start Discharge Current IRUN/SS(D) 0.8 1.8 3 µA VRUN/SS = 4.5V, VFB = 0V 3
Undervoltage Lockout VIN(UVLO) 3.4 3.9 V VIN Falling 3
Undervoltage Lockout Release VIN(UVLOR) 3.5 4 V VIN Rising 3
TG Driver Pull-Up On Resistance TG RUP 2 3 Ω TG High 3
TG Driver Pull-Down On Resistance TG RDOWN 2 3 Ω TG Low 3
BG Driver Pull-Up On Resistance BG RUP 3 4 Ω BG High 3
BG Driver Pull-Down On Resistance BG RDOWN 1 2 Ω BG Low 3
Internal VCC Voltage VINTVCC 4.7 5 5.3 V 6V < VIN < 30V, VEXTVCC = 4V 3
Internal VCC Load Regulation ΔVLDO(LOADREG) -0.1 2 % ICC = 0mA to 20mA, VEXTVCC = 4V 3
EXTVCC Switchover Voltage VEXTVCC 4.5 4.7 V ICC = 20mA, VEXTVCC Rising 3
EXTVCC Switch Drop Voltage ΔVEXTVCC 150 300 mV ICC = 20mA, VEXTVCC = 5V 3
PGOOD Upper Threshold ΔVFBH 5.5 7.5 9.5 % VFB Rising 3
PGOOD Lower Threshold ΔVFBL -5.5 -7.5 -9.5 % VFB Falling 3
PGOOD Hysteresis ΔVFB(HYS) 1 2 % VFB Returning 3
PGOOD Low Voltage VPGL 0.15 0.4 V IPGOOD = 5mA 3
Input Supply Voltage (VIN, ION) VIN -0.3 36 V 2
Boosted Topside Driver Supply Voltage BOOST -0.3 42 V 2
SW Voltage SW -5 36 V 2
EXTVCC, (BOOST, SW), RUN/SS, PGOOD Voltages -0.3 7 V 2
FCB, VON, VRNG Voltages -0.3 V upper limit INTVCC + 0.3V 2
ITH, VFB Voltages -0.3 2.7 V 2
TG, BG, INTVCC, EXTVCC Peak Currents 2 A 2
TG, BG, INTVCC, EXTVCC RMS Currents 50 mA 2
Operating Ambient Temperature Range LTC1778E TA -40 85 °C Note 4 2
Junction Temperature TJ 125 °C Note 2 2
Storage Temperature Range Tstg -65 150 °C 2
Lead Temperature (Soldering, 10 sec) 300 °C 2
Thermal Resistance Junction to Ambient θJA 130 °C/W GN package 2
Feedback Voltage Line Regulation ΔVFB(LINEREG) 0.002 %/V VIN = 4V to 30V, ITH = 1.2V (Note 3) 2
Minimum Current Sense Threshold VSENSE(MIN) 67 mV VRNG = 1V, VFB = 0.84V 3
Minimum Current Sense Threshold (VPGND, VSW) VPGND, VSW 47 mV VRNG = 0V, VFB = 0.84V 3
Minimum Current Sense Threshold (VPGND, VSW) VPGND, VSW 93 mV VRNG = INTVCC, VFB = 0.84V 3
EXTVCC Switchover Hysteresis ΔVEXTVCC(HYS) 200 mV 3

CAD (KiCad official)

  • Symbol: LTC1778EGN#TRPBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ltc1778egn-etched.step / ltc1778egn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1778egn.step / ltc1778egn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 d3f808dc90c8e9e9, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF