3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLTC1778EGN#TRPBF
Analog Devices · DC-DC Controllers · SSOP-16-150mil
LTC1778EGN#TRPBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RUN/SS | input | Run control and soft-start pin with a 0.8V to 2V start threshold (1.5V typ), 1.2µA typ soft-start charge current, and an absolute maximum of 7V to -0.3V. |
| 2 | PGOOD | output | Power good output voltage monitor (LTC1778 only) that trips at ±7.5% typ on VFB, pulls low to 0.15V typ (0.4V max) at 5mA, and has an absolute maximum of 7V to -0.3V. |
| 3 | VRNG | input | Current sense range input; VRNG = 0V, 1V or INTVCC sets the maximum current sense threshold to 93mV, 133mV or 186mV typ, with an absolute maximum of INTVCC + 0.3V to -0.3V. |
| 4 | FCB | input | Forced continuous control pin with a 0.8V typ threshold (0.76V to 0.84V) and -2µA typ pin current at 0.8V, with an absolute maximum of INTVCC + 0.3V to -0.3V. |
| 5 | ITH | output | Error amplifier compensation node (gm 1.7mS typ) with an absolute maximum of 2.7V to -0.3V. |
| 6 | SGND | power_in | Signal ground for the small-signal analog circuitry. |
| 7 | ION | input | On-time current input that sets switching frequency through an external resistor to VIN, with an absolute maximum of 36V to -0.3V. |
| 8 | VFB | input | Feedback input to the error amplifier with a 0.800V reference (±1% typ), -5nA to ±50nA input current, and an absolute maximum of 2.7V to -0.3V. |
| 9 | EXTVCC | power_in | External supply input for INTVCC that switches over at 4.5V to 4.7V rising with 200mV hysteresis, with an absolute maximum of 7V to -0.3V. |
| 10 | VIN | power_in | Main input supply operating from 4V to 36V, with an absolute maximum of 36V to -0.3V. |
| 11 | INTVCC | power_out | Internal 5V regulator output (4.7V to 5.3V) that powers the gate drivers, with peak current of 2A and RMS current of 50mA absolute maximum. |
| 12 | BG | output | Bottom-side N-channel MOSFET gate driver output with peak current of 2A and RMS current of 50mA absolute maximum. |
| 13 | PGND | power_in | Power ground for the bottom-side driver, also used for valley current sensing against SW (VPGND - VSW threshold). |
| 14 | SW | passive | Switching node connection to the inductor and MOSFETs, with an absolute maximum of 36V to -5V. |
| 15 | TG | output | Top-side N-channel MOSFET gate driver output with peak current of 2A and RMS current of 50mA absolute maximum. |
| 16 | BOOST | power_in | Boosted topside driver supply with an absolute maximum of 42V to -0.3V, and (BOOST - SW) limited to 7V to -0.3V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SSOP-16-150mil |
| Category | Power Supply Chip |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback Reference Voltage (LTC1778E) | VFB | 0.792 | 0.8 | 0.808 | V | ITH = 1.2V (Note 3) | 2 |
| Input DC Supply Current Normal | IQ | 900 | 2000 | µA | Normal | 2 | |
| Shutdown Supply Current | IQ | 15 | 30 | µA | Shutdown | 2 | |
| Feedback Voltage Load Regulation | ΔVFB(LOADREG) | -0.05 | -0.3 | % | ITH = 0.5V to 1.9V (Note 3) | 2 | |
| Feedback Input Current | IFB | -5 | 50 | nA | VFB = 0.8V | 2 | |
| Error Amplifier Transconductance | gm(EA) | 1.4 | 1.7 | 2 | mS | ITH = 1.2V (Note 3) | 2 |
| Forced Continuous Threshold | VFCB | 0.76 | 0.8 | 0.84 | V | 2 | |
| Forced Continuous Pin Current | IFCB | -1 | -2 | µA | VFCB = 0.8V | 2 | |
| Minimum On-Time | tON(MIN) | 50 | 100 | ns | ION = 180µA | 2 | |
| Minimum Off-Time | tOFF(MIN) | 250 | 400 | ns | ION = 30µA | 3 | |
| Maximum Current Sense Threshold | VSENSE(MAX) | 113 | 133 | 153 | mV | VRNG = 1V, VFB = 0.76V | 3 |
| Max Current Sense Threshold (VPGND, VSW) | VPGND, VSW | 79 | 93 | 107 | mV | VRNG = 0V, VFB = 0.76V | 3 |
| Max Current Sense Threshold (VPGND, VSW) | VPGND, VSW | 158 | 186 | 214 | mV | VRNG = INTVCC, VFB = 0.76V | 3 |
| Output Overvoltage Fault Threshold | ΔVFB(OV) | 5.5 | 7.5 | 9.5 | % | 3 | |
| Output Undervoltage Fault Threshold | VFB(UV) | 520 | 600 | 680 | mV | 3 | |
| RUN Pin Start Threshold | VRUN/SS(ON) | 0.8 | 1.5 | 2 | V | 3 | |
| RUN Pin Latchoff Enable Threshold | VRUN/SS(LE) | 4 | 4.5 | V | RUN/SS Pin Rising | 3 | |
| RUN Pin Latchoff Threshold | VRUN/SS(LT) | 3.5 | 4.2 | V | RUN/SS Pin Falling | 3 | |
| Soft-Start Charge Current | IRUN/SS(C) | -0.5 | -1.2 | -3 | µA | VRUN/SS = 0V | 3 |
| Soft-Start Discharge Current | IRUN/SS(D) | 0.8 | 1.8 | 3 | µA | VRUN/SS = 4.5V, VFB = 0V | 3 |
| Undervoltage Lockout | VIN(UVLO) | 3.4 | 3.9 | V | VIN Falling | 3 | |
| Undervoltage Lockout Release | VIN(UVLOR) | 3.5 | 4 | V | VIN Rising | 3 | |
| TG Driver Pull-Up On Resistance | TG RUP | 2 | 3 | Ω | TG High | 3 | |
| TG Driver Pull-Down On Resistance | TG RDOWN | 2 | 3 | Ω | TG Low | 3 | |
| BG Driver Pull-Up On Resistance | BG RUP | 3 | 4 | Ω | BG High | 3 | |
| BG Driver Pull-Down On Resistance | BG RDOWN | 1 | 2 | Ω | BG Low | 3 | |
| Internal VCC Voltage | VINTVCC | 4.7 | 5 | 5.3 | V | 6V < VIN < 30V, VEXTVCC = 4V | 3 |
| Internal VCC Load Regulation | ΔVLDO(LOADREG) | -0.1 | 2 | % | ICC = 0mA to 20mA, VEXTVCC = 4V | 3 | |
| EXTVCC Switchover Voltage | VEXTVCC | 4.5 | 4.7 | V | ICC = 20mA, VEXTVCC Rising | 3 | |
| EXTVCC Switch Drop Voltage | ΔVEXTVCC | 150 | 300 | mV | ICC = 20mA, VEXTVCC = 5V | 3 | |
| PGOOD Upper Threshold | ΔVFBH | 5.5 | 7.5 | 9.5 | % | VFB Rising | 3 |
| PGOOD Lower Threshold | ΔVFBL | -5.5 | -7.5 | -9.5 | % | VFB Falling | 3 |
| PGOOD Hysteresis | ΔVFB(HYS) | 1 | 2 | % | VFB Returning | 3 | |
| PGOOD Low Voltage | VPGL | 0.15 | 0.4 | V | IPGOOD = 5mA | 3 | |
| Input Supply Voltage (VIN, ION) | VIN | -0.3 | 36 | V | 2 | ||
| Boosted Topside Driver Supply Voltage | BOOST | -0.3 | 42 | V | 2 | ||
| SW Voltage | SW | -5 | 36 | V | 2 | ||
| EXTVCC, (BOOST, SW), RUN/SS, PGOOD Voltages | -0.3 | 7 | V | 2 | |||
| FCB, VON, VRNG Voltages | -0.3 | V | upper limit INTVCC + 0.3V | 2 | |||
| ITH, VFB Voltages | -0.3 | 2.7 | V | 2 | |||
| TG, BG, INTVCC, EXTVCC Peak Currents | 2 | A | 2 | ||||
| TG, BG, INTVCC, EXTVCC RMS Currents | 50 | mA | 2 | ||||
| Operating Ambient Temperature Range LTC1778E | TA | -40 | 85 | °C | Note 4 | 2 | |
| Junction Temperature | TJ | 125 | °C | Note 2 | 2 | ||
| Storage Temperature Range | Tstg | -65 | 150 | °C | 2 | ||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 2 | ||||
| Thermal Resistance Junction to Ambient | θJA | 130 | °C/W | GN package | 2 | ||
| Feedback Voltage Line Regulation | ΔVFB(LINEREG) | 0.002 | %/V | VIN = 4V to 30V, ITH = 1.2V (Note 3) | 2 | ||
| Minimum Current Sense Threshold | VSENSE(MIN) | 67 | mV | VRNG = 1V, VFB = 0.84V | 3 | ||
| Minimum Current Sense Threshold (VPGND, VSW) | VPGND, VSW | 47 | mV | VRNG = 0V, VFB = 0.84V | 3 | ||
| Minimum Current Sense Threshold (VPGND, VSW) | VPGND, VSW | 93 | mV | VRNG = INTVCC, VFB = 0.84V | 3 | ||
| EXTVCC Switchover Hysteresis | ΔVEXTVCC(HYS) | 200 | mV | 3 |
CAD (KiCad official)
- Symbol:
LTC1778EGN#TRPBF - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
ltc1778egn-etched.step/ltc1778egn-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1778egn.step/ltc1778egn.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
d3f808dc90c8e9e9, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).