main
Ray Publish 0.1.0 3459e0f

LTC1726EMS8-2.5#TRPBF

Analog Devices · Monitors & Reset Circuits · MSOP-8

LTC1726EMS8-2.5#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC3 power_in 3.3V sense input that also supplies power to the part when its voltage is greater than the voltage on VCC25/VCC5, and should be bypassed to ground with a 0.1µF or larger ceramic capacitor.
2 VCC25/VCC5 power_in 2.5V sense input on the LTC1726-2.5 (5V sense input on the LTC1726-5) that also supplies power to the part when its voltage is greater than the voltage on VCC3, and should be bypassed to ground with a 0.1µF or larger ceramic capacitor.
3 VCCA power_in 1V sense, high-impedance input that can be tied to VCC3, VCC5 or VCC25 if unused.
4 GND power_in Ground.
5 WDI input Logic watchdog input whose rising or falling edge must occur within the selected watchdog time-out period or a reset pulse occurs, and which should be connected to VCC3 or ground when the watchdog is disabled.
6 RST output Active-low open-drain reset output with a weak internal pull-up to VCC3 that asserts when any supply is below its trip threshold and can be pulled up above VCC3 for 5V logic.
7 WT passive Watchdog time-out input where a capacitor to ground sets tWT = 21.8 • CWT (tWT in µs, CWT in pF), and connecting it to ground disables the watchdog function.
8 RT passive Reset time-out input where a capacitor to ground sets tRT = 3.30 • CRT (tRT in µs, CRT in pF).

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC3 Input Threshold VRT3 3.036 3.085 3.135 V VCC3 input threshold, non-H-grade row, full temperature range (l) 3
VCC25 Input Threshold (2.5V Version) VRT25 2.3 2.337 2.375 V Full temperature range (l) 3
VCCA Input Threshold VRTA 0.985 1 1.015 V Non-H-grade row, full temperature range (l) 3
VCC3 or VCC5 Operating Voltage VCC 1 7 V RST in correct logic state 3
VCC3 Supply Current IVCC3 1 2 µA VCC5/VCC25 > VCC3 3
VCC3 Supply Current IVCC3 16 30 µA VCC5/VCC25 < VCC3, VCC3 = 3.3V 3
VCC25 Supply Current IVCC25 1 2 µA VCC25 < VCC3, VCC25 = 2.5V (Note 4) 3
VCCA Input Current IVCCA -15 0 15 nA VCCA = 1V 3
RT Charge Current Out 1.4 2 2.6 µA VRT = 0V, non-H-grade row, full temperature range (l) 3
WT Charge Current Out 1.4 2 2.6 µA VWT = 0V, non-H-grade row, full temperature range (l) 3
RT Discharge Current Out 14 20 26 µA VRT = 1.3V, non-H-grade row, full temperature range (l) 3
WT Discharge Current Out 14 20 26 µA VWT = 1.3V, non-H-grade row, full temperature range (l) 3
Reset Time-Out Period Variation ∆tRT -30 0 30 % CRT = 1500pF, deviation from tRT = 5ms (Note 5), non-H-grade row 3
Watchdog Time-Out Period Variation ∆tWT -30 0 30 % CWT = 1500pF, deviation from tWT = 33ms (Note 5), non-H-grade row 3
RST Output Voltage Low VOL 0.15 0.4 V ISINK = 2.5mA, VCC5/VCC25 = 0V 3
RST Output Voltage Low VOL 0.05 0.3 V ISINK = 100µA, VCC3 = 1V, VCC5/VCC25 = 0V 3
WDI Pulse Width tWP 40 ns 3
WDI Leakage Current -1 1 µA 3
Terminal Voltage (VCC3, VCCA) -0.3 7 V Voltage with respect to GND (Notes 1, 2) 2
Terminal Voltage (VCC5/VCC25) -0.3 7 V Voltage with respect to GND (Notes 1, 2) 2
Terminal Voltage (RST) -0.3 7 V Voltage with respect to GND (Notes 1, 2) 2
Terminal Voltage (WDI) -0.3 7 V Voltage with respect to GND (Notes 1, 2) 2
Terminal Voltage (RT, WT) -0.3 7 V Voltage with respect to GND (Notes 1, 2) 2
Operating Temperature Range -40 85 °C LTC1726E 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 125 °C MS8 package 2
Thermal Resistance, Junction to Ambient θJA 200 °C/W MS8 package 2

CAD (KiCad official)

  • Symbol: LTC1726EMS8-2.5#TRPBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: ltc1726ems8-2-5-trpbf-etched.step / ltc1726ems8-2-5-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1726ems8-2-5-trpbf.step / ltc1726ems8-2-5-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (14 pp, sha256 d9804c4c541f7935, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF