Generated by kicad-footprint-generator · KiCad file format 20260206
LTC1726EMS8-2.5#TRPBF
Analog Devices · Monitors & Reset Circuits · MSOP-8
LTC1726EMS8-2.5#TRPBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC3 | power_in | 3.3V sense input that also supplies power to the part when its voltage is greater than the voltage on VCC25/VCC5, and should be bypassed to ground with a 0.1µF or larger ceramic capacitor. |
| 2 | VCC25/VCC5 | power_in | 2.5V sense input on the LTC1726-2.5 (5V sense input on the LTC1726-5) that also supplies power to the part when its voltage is greater than the voltage on VCC3, and should be bypassed to ground with a 0.1µF or larger ceramic capacitor. |
| 3 | VCCA | power_in | 1V sense, high-impedance input that can be tied to VCC3, VCC5 or VCC25 if unused. |
| 4 | GND | power_in | Ground. |
| 5 | WDI | input | Logic watchdog input whose rising or falling edge must occur within the selected watchdog time-out period or a reset pulse occurs, and which should be connected to VCC3 or ground when the watchdog is disabled. |
| 6 | RST | output | Active-low open-drain reset output with a weak internal pull-up to VCC3 that asserts when any supply is below its trip threshold and can be pulled up above VCC3 for 5V logic. |
| 7 | WT | passive | Watchdog time-out input where a capacitor to ground sets tWT = 21.8 • CWT (tWT in µs, CWT in pF), and connecting it to ground disables the watchdog function. |
| 8 | RT | passive | Reset time-out input where a capacitor to ground sets tRT = 3.30 • CRT (tRT in µs, CRT in pF). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC3 Input Threshold | VRT3 | 3.036 | 3.085 | 3.135 | V | VCC3 input threshold, non-H-grade row, full temperature range (l) | 3 |
| VCC25 Input Threshold (2.5V Version) | VRT25 | 2.3 | 2.337 | 2.375 | V | Full temperature range (l) | 3 |
| VCCA Input Threshold | VRTA | 0.985 | 1 | 1.015 | V | Non-H-grade row, full temperature range (l) | 3 |
| VCC3 or VCC5 Operating Voltage | VCC | 1 | 7 | V | RST in correct logic state | 3 | |
| VCC3 Supply Current | IVCC3 | 1 | 2 | µA | VCC5/VCC25 > VCC3 | 3 | |
| VCC3 Supply Current | IVCC3 | 16 | 30 | µA | VCC5/VCC25 < VCC3, VCC3 = 3.3V | 3 | |
| VCC25 Supply Current | IVCC25 | 1 | 2 | µA | VCC25 < VCC3, VCC25 = 2.5V (Note 4) | 3 | |
| VCCA Input Current | IVCCA | -15 | 0 | 15 | nA | VCCA = 1V | 3 |
| RT Charge Current Out | 1.4 | 2 | 2.6 | µA | VRT = 0V, non-H-grade row, full temperature range (l) | 3 | |
| WT Charge Current Out | 1.4 | 2 | 2.6 | µA | VWT = 0V, non-H-grade row, full temperature range (l) | 3 | |
| RT Discharge Current Out | 14 | 20 | 26 | µA | VRT = 1.3V, non-H-grade row, full temperature range (l) | 3 | |
| WT Discharge Current Out | 14 | 20 | 26 | µA | VWT = 1.3V, non-H-grade row, full temperature range (l) | 3 | |
| Reset Time-Out Period Variation | ∆tRT | -30 | 0 | 30 | % | CRT = 1500pF, deviation from tRT = 5ms (Note 5), non-H-grade row | 3 |
| Watchdog Time-Out Period Variation | ∆tWT | -30 | 0 | 30 | % | CWT = 1500pF, deviation from tWT = 33ms (Note 5), non-H-grade row | 3 |
| RST Output Voltage Low | VOL | 0.15 | 0.4 | V | ISINK = 2.5mA, VCC5/VCC25 = 0V | 3 | |
| RST Output Voltage Low | VOL | 0.05 | 0.3 | V | ISINK = 100µA, VCC3 = 1V, VCC5/VCC25 = 0V | 3 | |
| WDI Pulse Width | tWP | 40 | ns | 3 | |||
| WDI Leakage Current | -1 | 1 | µA | 3 | |||
| Terminal Voltage (VCC3, VCCA) | -0.3 | 7 | V | Voltage with respect to GND (Notes 1, 2) | 2 | ||
| Terminal Voltage (VCC5/VCC25) | -0.3 | 7 | V | Voltage with respect to GND (Notes 1, 2) | 2 | ||
| Terminal Voltage (RST) | -0.3 | 7 | V | Voltage with respect to GND (Notes 1, 2) | 2 | ||
| Terminal Voltage (WDI) | -0.3 | 7 | V | Voltage with respect to GND (Notes 1, 2) | 2 | ||
| Terminal Voltage (RT, WT) | -0.3 | 7 | V | Voltage with respect to GND (Notes 1, 2) | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | LTC1726E | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 125 | °C | MS8 package | 2 | ||
| Thermal Resistance, Junction to Ambient | θJA | 200 | °C/W | MS8 package | 2 |
CAD (KiCad official)
- Symbol:
LTC1726EMS8-2.5#TRPBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
ltc1726ems8-2-5-trpbf-etched.step/ltc1726ems8-2-5-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ltc1726ems8-2-5-trpbf.step/ltc1726ems8-2-5-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (14 pp, sha256
d9804c4c541f7935, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).