main
Ray Publish 0.1.0 28e6de9
{
  "slug": "ltc1563-2cgn",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Pre-ordered Chips, SSOP-16-150mil. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "interface ics",
    "ltc1563-2cgn#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc1563-2cgn.kicad_sym",
    "ltc1563-2cgn.kicad_mod",
    "ltc1563-2cgn.glb",
    "ltc1563-2cgn.step",
    "ltc1563-2cgn.lbr",
    "docs/hero.png",
    "docs/ltc1563-2cgn-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc1563-2cgn-hero.glb",
    "ltc1563-2cgn-hero.overlay.json"
  ],
  "component": {
    "mpn": "LTC1563-2CGN",
    "manufacturer": "Analog Devices",
    "package": "SSOP-16-150mil",
    "pin_count": 16,
    "category": "Interface ICs",
    "subcategory": "Pre-ordered Chips",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/156323fa.pdf",
    "parts": {
      "symbol": "ltc1563-2cgn.kicad_sym",
      "footprint": "ltc1563-2cgn.kicad_mod",
      "model_3d": "ltc1563-2cgn-hero.glb",
      "model_3d_plain": "ltc1563-2cgn.glb",
      "model_3d_step": "ltc1563-2cgn-etched.step",
      "model_3d_step_plain": "ltc1563-2cgn.step",
      "lbr": "ltc1563-2cgn.lbr"
    },
    "distributor_links": {
      "lcsc": "C675969",
      "digikey": "505-LTC1563-2CGN#PBF-ND",
      "mouser": "584-LTC1563-2CGN#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-13T10:03:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC1563-2CGN#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LTC1563-2CGN#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LP",
        "type": "input",
        "description": "Low Power mode select: a logic high or open pin selects High Speed mode (a small pull-up defaults the part to High Speed if left open), and a logic low or connection to V- selects Low Power mode."
      },
      {
        "number": "2",
        "name": "SA",
        "type": "passive",
        "description": "Section A summing point for signals fed forward and backward; capacitance on this pin causes peaking near cutoff, so the section A resistors should be placed as close as possible to it."
      },
      {
        "number": "3",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; for best performance it should be connected to ground."
      },
      {
        "number": "4",
        "name": "INVA",
        "type": "input",
        "description": "Inverting input of the section A op amp; it is a high-impedance, noise-sensitive node, so its printed circuit connection must be kept as short as possible."
      },
      {
        "number": "5",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; for best performance it should be connected to ground."
      },
      {
        "number": "6",
        "name": "LPA",
        "type": "output",
        "description": "Section A lowpass output from a rail-to-rail op amp, designed to drive a nominal net load of 5kΩ and 20pF."
      },
      {
        "number": "7",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground, the midpoint of an internal resistive divider between V+ and V- with a nominal series equivalent resistance of 10kΩ, serving as the internal ground reference; the analog ground plane should connect to digital ground at a single point."
      },
      {
        "number": "8",
        "name": "V–",
        "type": "power_in",
        "description": "Negative supply pin, to be bypassed with a 0.1µF capacitor as close to the pin as possible; total supply voltage (V+ to V-) must not exceed 11V."
      },
      {
        "number": "9",
        "name": "EN",
        "type": "input",
        "description": "Enable: a logic high or open pin puts the part in shutdown (outputs and AGND high impedance), and it must be connected to V- or a logic low to enable normal operation."
      },
      {
        "number": "10",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; for best performance it should be connected to ground."
      },
      {
        "number": "11",
        "name": "SB",
        "type": "passive",
        "description": "Section B summing point for signals fed forward and backward; capacitance on this pin causes peaking near cutoff, so the section B resistors should be placed as close as possible to it."
      },
      {
        "number": "12",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; for best performance it should be connected to ground."
      },
      {
        "number": "13",
        "name": "INVB",
        "type": "input",
        "description": "Inverting input of the section B op amp; it is a high-impedance, noise-sensitive node, so its printed circuit connection must be kept as short as possible."
      },
      {
        "number": "14",
        "name": "NC",
        "type": "unconnected",
        "description": "Not connected internally; for best performance it should be connected to ground."
      },
      {
        "number": "15",
        "name": "LPB",
        "type": "output",
        "description": "Section B lowpass output from a rail-to-rail op amp, designed to drive a nominal net load of 5kΩ and 20pF."
      },
      {
        "number": "16",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply pin, to be bypassed with a 0.1µF capacitor as close to the pin as possible; total supply voltage (V+ to V-) must not exceed 11V."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet labels these NC (not connected internally) but also says they should be connected to syste; AGND is an internal mid-supply reference divider node rather than a conventional ground; typed as po; SA and SB are summing nodes that the datasheet describes as sensitive internal nodes rather than nor"
        ],
        "pages_sent": 20,
        "cost_usd": 0.1321,
        "at": "2026-11-13T10:02:48"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/156323fa.pdf",
        "pages": 20,
        "sha256": "8acdc1ffd2c413d5",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc1563-2cgn.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "3b55ed1c8dc3eb976cfab8b1e135fd29a17f33ebf575a8a088a30e82c9a5f2ee",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc1563-2cgn-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.0,
          4.9,
          1.85
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "1549915e15c61a39a58e7799220cd51670968841014a9b0807745d89e53c568e",
        "checked": "2026-11-13",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}