main
History Download
Ray Publish 0.1.0 28e6de9

LTC1563-2CGN#PBF

Analog Devices · Pre-ordered Chips · SSOP-16-150mil

LTC1563-2CGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LP input Low Power mode select: a logic high or open pin selects High Speed mode (a small pull-up defaults the part to High Speed if left open), and a logic low or connection to V- selects Low Power mode.
2 SA passive Section A summing point for signals fed forward and backward; capacitance on this pin causes peaking near cutoff, so the section A resistors should be placed as close as possible to it.
3 NC unconnected Not connected internally; for best performance it should be connected to ground.
4 INVA input Inverting input of the section A op amp; it is a high-impedance, noise-sensitive node, so its printed circuit connection must be kept as short as possible.
5 NC unconnected Not connected internally; for best performance it should be connected to ground.
6 LPA output Section A lowpass output from a rail-to-rail op amp, designed to drive a nominal net load of 5kΩ and 20pF.
7 AGND power_in Analog ground, the midpoint of an internal resistive divider between V+ and V- with a nominal series equivalent resistance of 10kΩ, serving as the internal ground reference; the analog ground plane should connect to digital ground at a single point.
8 V- power_in Negative supply pin, to be bypassed with a 0.1µF capacitor as close to the pin as possible; total supply voltage (V+ to V-) must not exceed 11V.
9 EN input Enable: a logic high or open pin puts the part in shutdown (outputs and AGND high impedance), and it must be connected to V- or a logic low to enable normal operation.
10 NC unconnected Not connected internally; for best performance it should be connected to ground.
11 SB passive Section B summing point for signals fed forward and backward; capacitance on this pin causes peaking near cutoff, so the section B resistors should be placed as close as possible to it.
12 NC unconnected Not connected internally; for best performance it should be connected to ground.
13 INVB input Inverting input of the section B op amp; it is a high-impedance, noise-sensitive node, so its printed circuit connection must be kept as short as possible.
14 NC unconnected Not connected internally; for best performance it should be connected to ground.
15 LPB output Section B lowpass output from a rail-to-rail op amp, designed to drive a nominal net load of 5kΩ and 20pF.
16 V+ power_in Positive supply pin, to be bypassed with a 0.1µF capacitor as close to the pin as possible; total supply voltage (V+ to V-) must not exceed 11V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Interface ICs
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Total Supply Voltage (V+ to V-) 11 V 2
Operating Temperature Range (LTC1563C) 0 70 °C LTC1563C 2
Storage Temperature Range -65 150 °C 2
Power Dissipation 500 mW 2
Total Supply Voltage (VS), HS Mode 3 11 V 2
Total Supply Voltage (VS), LP Mode 2.7 11 V 2
Output Voltage Swing High (LPB Pin) 2.9 2.95 V HS Mode; VS = 3V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Voltage Swing High (LPB Pin) 4.55 4.7 V HS Mode; VS = 4.75V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Voltage Swing High (LPB Pin) 4.8 4.9 V HS Mode; VS = ±5V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Voltage Swing Low (LPB Pin) 0.015 0.05 V HS Mode; VS = 3V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Voltage Swing Low (LPB Pin) 0.02 0.05 V HS Mode; VS = 4.75V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Voltage Swing Low (LPB Pin) -4.95 -4.9 V HS Mode; VS = ±5V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Swing High (LPB Pin) 2.6 2.65 V LP Mode; VS = 2.7V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Swing High (LPB Pin) 4.55 4.65 V LP Mode; VS = 4.75V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Swing High (LPB Pin) 4.8 4.9 V LP Mode; VS = ±5V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Swing Low (LPB Pin) 0.01 0.05 V LP Mode; VS = 2.7V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Swing Low (LPB Pin) 0.015 0.05 V LP Mode; VS = 4.75V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
Output Swing Low (LPB Pin) -4.95 -4.9 V LP Mode; VS = ±5V, fC = 25.6kHz, RFIL = 100k, RL = 10k to GND 2
DC Offset Voltage, HS Mode (Section A Only) -3 1.5 3 mV VS = 3V, fC = 25.6kHz, RFIL = 100k 2
DC Offset Voltage, HS Mode (Section A Only) -3 1 3 mV VS = 4.75V, fC = 25.6kHz, RFIL = 100k 2
DC Offset Voltage, LP Mode (Section A Only) -6 2 6 mV VS = 2.7V, fC = 25.6kHz, RFIL = 100k 2
DC Offset Voltage, LP Mode (Section A Only) -7 2 7 mV VS = ±5V, fC = 25.6kHz, RFIL = 100k 2
DC Offset Voltage, HS Mode (Input to Output, Sections A, B Cascaded) -3 1.5 3 mV VS = 3V, fC = 25.6kHz, RFIL = 100k 2
DC Offset Voltage, HS Mode (Input to Output, Sections A, B Cascaded) -3 1 3 mV VS = 4.75V, fC = 25.6kHz, RFIL = 100k 2
DC Offset Voltage, LP Mode (Input to Output, Sections A, B Cascaded) -7 2 7 mV VS = 2.7V, fC = 25.6kHz, RFIL = 100k 3
DC Offset Voltage, LP Mode (Input to Output, Sections A, B Cascaded) -8 2 8 mV VS = ±5V, fC = 25.6kHz, RFIL = 100k 3
Power Supply Current, HS Mode 8 14 mA VS = 3V, fC = 25.6kHz, RFIL = 100k 3
Power Supply Current, HS Mode 10.5 17 mA VS = 4.75V, fC = 25.6kHz, RFIL = 100k 3
Power Supply Current, HS Mode 15 23 mA VS = ±5V, fC = 25.6kHz, RFIL = 100k 3
Power Supply Current, LP Mode 1 1.8 mA VS = 2.7V, fC = 25.6kHz, RFIL = 100k 3
Power Supply Current, LP Mode 1.4 2.5 mA VS = 4.75V, fC = 25.6kHz, RFIL = 100k 3
Power Supply Current, LP Mode 2.3 3.5 mA VS = ±5V, fC = 25.6kHz, RFIL = 100k 3
Shutdown Mode Supply Current 1 20 µA VS = 4.75V, fC = 25.6kHz, RFIL = 100k 3
AGND Voltage 2.35 2.375 2.4 V VS = 4.75V, fC = 25.6kHz, RFIL = 100k 3
EN Input Logic Low Level 0.8 V VS = 3V 3
EN Input Logic Low Level 1 V VS = 4.75V 3
EN Input Logic High Level 2.5 V VS = 3V 3
EN Input Logic High Level 4.3 V VS = 4.75V 3
EN Input Logic High Level 4.4 V VS = ±5V 3
LP Logic Low Level 0.8 V VS = 3V 3
LP Logic Low Level 1 V VS = 4.75V 3
LP Logic High Level 2.5 V VS = 3V 3
LP Logic High Level 4.3 V VS = 4.75V 3
LP Logic High Level 4.4 V VS = ±5V 3
Cutoff Frequency Accuracy, HS Mode (fC = 25.6kHz) -2 1.5 3.5 % VS = 3V, RFIL = 100k 3
Cutoff Frequency Accuracy, HS Mode (fC = 256kHz) -5 1.5 2.5 % VS = 3V, RFIL = 10k 3
Cutoff Frequency Accuracy, LP Mode (fC = 25.6kHz) -3 1.5 3 % VS = 2.7V, RFIL = 100k 3
Thermal Resistance, Junction to Ambient (GN Package) θJA 135 °C/W 2

CAD (KiCad official)

  • Symbol: LTC1563-2CGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: ltc1563-2cgn-etched.step / ltc1563-2cgn-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ltc1563-2cgn.step / ltc1563-2cgn.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 8acdc1ffd2c413d5, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF