main
Ray Publish 0.1.0 237b5e2
{
  "slug": "ltc1060cn-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Switched Capacitor Filters, PDIP-20. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "filters",
    "ltc1060cn#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "ltc1060cn-pbf.kicad_sym",
    "ltc1060cn-pbf.kicad_mod",
    "ltc1060cn-pbf.glb",
    "ltc1060cn-pbf.step",
    "ltc1060cn-pbf.lbr",
    "docs/hero.png",
    "docs/ltc1060cn-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "ltc1060cn-pbf-hero.glb",
    "ltc1060cn-pbf-hero.overlay.json",
    "ltc1060cn-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LTC1060CN#PBF",
    "manufacturer": "Analog Devices",
    "package": "PDIP-20",
    "pin_count": 20,
    "category": "Filters",
    "subcategory": "Switched Capacitor Filters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589856353394601984",
    "parts": {
      "symbol": "ltc1060cn-pbf.kicad_sym",
      "footprint": "ltc1060cn-pbf.kicad_mod",
      "model_3d": "ltc1060cn-pbf-hero.glb",
      "model_3d_plain": "ltc1060cn-pbf-etched.glb",
      "model_3d_step": "ltc1060cn-pbf-etched.step",
      "model_3d_step_plain": "ltc1060cn-pbf.step",
      "lbr": "ltc1060cn-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C674248",
      "digikey": "505-LTC1060CN#PBF-ND",
      "mouser": "584-LTC1060CN#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-16T09:32:28Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LTC1060CN#PBF-ND",
        "status": "found",
        "lifecycle": "Active"
      },
      "mouser": {
        "pn": "584-LTC1060CN#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "LPA",
        "type": "output",
        "description": "Lowpass output of filter block A, one of the two switched-capacitor filter outputs."
      },
      {
        "number": "2",
        "name": "BPA",
        "type": "output",
        "description": "Bandpass output of filter block A; wideband noise at the BP and LP outputs increases for high Q values."
      },
      {
        "number": "3",
        "name": "N/AP/HPA",
        "type": "output",
        "description": "Notch, allpass or highpass output of filter block A, depending on the configured filter function."
      },
      {
        "number": "4",
        "name": "INVA",
        "type": "input",
        "description": "Inverting input of the input op amp of filter block A."
      },
      {
        "number": "5",
        "name": "S1A",
        "type": "input",
        "description": "Voltage signal input of filter A that should be driven from a source impedance below 5kΩ; tie to AGND when not used."
      },
      {
        "number": "6",
        "name": "SA/B",
        "type": "input",
        "description": "When high, the S2 summer input is tied to the lowpass output; when connected to the negative supply, S2 switches to ground and becomes inactive."
      },
      {
        "number": "7",
        "name": "VA+",
        "type": "power_in",
        "description": "Positive analog supply pin, biased from the same DC source as VD+ and typically bypassed with a 0.1µF ceramic capacitor; the filter operates reliably from a ±2.37V minimum supply."
      },
      {
        "number": "8",
        "name": "VD+",
        "type": "power_in",
        "description": "Positive digital supply pin, normally tied to VA+ and bypassed with a 0.1µF ceramic capacitor."
      },
      {
        "number": "9",
        "name": "LSh",
        "type": "input",
        "description": "Level shift pin for T2L or CMOS clock levels; connect to ground (AGND potential) for dual supplies of ±4.5V or higher."
      },
      {
        "number": "10",
        "name": "CLKA",
        "type": "input",
        "description": "Clock input for filter A, sharing the LSh level shift; the duty cycle should be close to 50%."
      },
      {
        "number": "11",
        "name": "CLKB",
        "type": "input",
        "description": "Clock input for filter B, sharing the LSh level shift; the duty cycle should be close to 50%."
      },
      {
        "number": "12",
        "name": "50/100/HOLD",
        "type": "input",
        "description": "Mode pin: tied to V+ selects 50:1 operation, tied to 1/2 supply (AGND) selects 100:1 operation, and shorting it to the negative supply stops the filter and holds the last sample."
      },
      {
        "number": "13",
        "name": "VD-",
        "type": "power_in",
        "description": "Negative digital supply pin, normally tied to VA- and bypassed with a 0.1µF ceramic capacitor."
      },
      {
        "number": "14",
        "name": "VA-",
        "type": "power_in",
        "description": "Negative analog supply pin, biased from the same DC source as VD-; the device operates from ±2.37V to ±8V supplies."
      },
      {
        "number": "15",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground: the system ground for dual supply operation, or the 1/2 supply point bypassed with 0.1µF for single supply operation."
      },
      {
        "number": "16",
        "name": "S1B",
        "type": "input",
        "description": "Voltage signal input of filter B that should be driven from a source impedance below 5kΩ; tie to AGND when not used."
      },
      {
        "number": "17",
        "name": "INVB",
        "type": "input",
        "description": "Inverting input of the input op amp of filter block B."
      },
      {
        "number": "18",
        "name": "N/AP/HPB",
        "type": "output",
        "description": "Notch, allpass or highpass output of filter block B, depending on the configured filter function."
      },
      {
        "number": "19",
        "name": "BPB",
        "type": "output",
        "description": "Bandpass output of filter block B; wideband noise at the BP and LP outputs increases for high Q values."
      },
      {
        "number": "20",
        "name": "LPB",
        "type": "output",
        "description": "Lowpass output of filter block B; wideband noise at the BP and LP outputs increases for high Q values."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The PDIP-20 pinout comes from the shared TOP VIEW drawing on page 2, which is text-extracted, so pin; The datasheet lists the MPN as LTC1060CN, and the N20 PDIP pinout applies to that order code. The '#; Page 2 marks the device as obsolete and suggests the N20 and SW20 packages as an alternate source. T",
          "4/20 pins cited to the wrong page (name found elsewhere): ['7:VA+@p7', '8:VD+@p7', '19:BPB@p8', '20:LPB@p8']"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0684,
        "at": "2026-10-16T09:32:09"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8589856353394601984",
        "pages": 20,
        "sha256": "f60a2048d02258bc",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 20,
        "described": 20,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "ltc1060cn-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          26.162,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "ca359c9b9e0ce94efcb6c96866513f659eef6517d629ace3c4a0a779f6fd57bb",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "ltc1060cn-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "body on z = 0, through-hole leads below",
        "extents_mm": [
          7.874,
          26.162,
          6.98
        ],
        "zmin_mm": -3.3,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "de824b7db033344a203ca1a51d6d96cfc14d1d16bcc924c6b4583df59c3e0db8",
        "checked": "2026-10-16",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}