main
Ray Publish 0.1.0 aad0f24
{
  "slug": "lt8714efe-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Controllers, TSSOP-20-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt8714efe#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt8714efe-pbf.kicad_sym",
    "lt8714efe-pbf.kicad_mod",
    "lt8714efe-pbf.glb",
    "lt8714efe-pbf.step",
    "lt8714efe-pbf.lbr",
    "docs/hero.png",
    "docs/lt8714efe-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt8714efe-pbf-hero.glb",
    "lt8714efe-pbf-hero.overlay.json",
    "lt8714efe-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT8714EFE#PBF",
    "manufacturer": "Analog Devices",
    "package": "TSSOP-20-EP",
    "pin_count": 21,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Controllers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/8714f.pdf",
    "parts": {
      "symbol": "lt8714efe-pbf.kicad_sym",
      "footprint": "lt8714efe-pbf.kicad_mod",
      "model_3d": "lt8714efe-pbf-hero.glb",
      "model_3d_plain": "lt8714efe-pbf-etched.glb",
      "model_3d_step": "lt8714efe-pbf-etched.step",
      "model_3d_step_plain": "lt8714efe-pbf.step",
      "lbr": "lt8714efe-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C674199",
      "digikey": "505-LT8714EFE#PBF-ND",
      "mouser": "584-LT8714EFE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-28T15:36:46Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT8714EFE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT8714EFE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "FB",
        "type": "input",
        "description": "Feedback input; a resistor from FB to VOUT is set by RFB = 7250Ω • (VOUT - VCTRL)/(VCTRL - 0.6065)."
      },
      {
        "number": "2",
        "name": "VC",
        "type": "output",
        "description": "Error amplifier output that requires an external compensation network."
      },
      {
        "number": "3",
        "name": "SS",
        "type": "passive",
        "description": "Soft-start pin charged through an internal 260k resistor to about 2.7V; its capacitor must be at least 5× the IMON capacitor."
      },
      {
        "number": "4",
        "name": "PG",
        "type": "output",
        "description": "Active-high open-drain power good output that needs a pull-up; power is good when VFB is within ±60mV of VCTRL, with PG voltage limited to -0.3V to 7V and PG current to ±1mA."
      },
      {
        "number": "5",
        "name": "IMON",
        "type": "output",
        "description": "Output current monitor with VIMON = 12.14 • (VISP - VISN + 49.9mV) that must be filtered by 10nF to 100nF and must not be resistively loaded."
      },
      {
        "number": "6",
        "name": "ISN",
        "type": "input",
        "description": "Kelvin-connected output current sense negative input that limits the sense voltage across the sense resistor to 50mV typical; voltage range up to 80V."
      },
      {
        "number": "7",
        "name": "ISP",
        "type": "input",
        "description": "Kelvin-connected output current sense positive input; ISP voltage is limited to ISN - 0.4V to ISN + 2V."
      },
      {
        "number": "8",
        "name": "BIAS",
        "type": "power_in",
        "description": "Top gate driver supply connected to the input supply VIN and locally bypassed; rated to 80V."
      },
      {
        "number": "9",
        "name": "INTVEE",
        "type": "power_out",
        "description": "Regulator output at 6.18V below BIAS (typical) that needs a minimum 2.2µF bypass to BIAS and sets the bottom rail of the TG driver."
      },
      {
        "number": "10",
        "name": "TG",
        "type": "output",
        "description": "PFET gate drive with low level BIAS - INTVEE and high level BIAS."
      },
      {
        "number": "11",
        "name": "BG",
        "type": "output",
        "description": "NFET gate drive with low level GND and high level INTVCC."
      },
      {
        "number": "12",
        "name": "INTVCC",
        "type": "power_out",
        "description": "6.3V input LDO regulator output that needs a minimum 2.2µF bypass to GND and allows a maximum 5mA external load."
      },
      {
        "number": "13",
        "name": "VIN",
        "type": "power_in",
        "description": "Input supply pin with a minimum operating voltage of 4.5V (typical) and an absolute maximum of 80V."
      },
      {
        "number": "14",
        "name": "CSN",
        "type": "input",
        "description": "NFET current sense negative input; the negative sense voltage at low duty cycle is -32mV (typical)."
      },
      {
        "number": "15",
        "name": "CSP",
        "type": "input",
        "description": "NFET current sense positive input; the maximum positive sense voltage at low duty cycle is 66mV (typical)."
      },
      {
        "number": "16",
        "name": "EN",
        "type": "input",
        "description": "Enable input that shuts the chip down below 0.3V and activates it above 1.3V (typical); it must not float and is rated to 80V."
      },
      {
        "number": "17",
        "name": "CTRL",
        "type": "input",
        "description": "Output voltage control input that accepts 0.1V to 1.1V; FB regulates to about 1.213V if CTRL exceeds 1.213V and to about 0V if CTRL is below 0V."
      },
      {
        "number": "18",
        "name": "RT",
        "type": "passive",
        "description": "Timing resistor pin that sets the switching frequency between 100kHz and 750kHz; it must not float."
      },
      {
        "number": "19",
        "name": "SYNC",
        "type": "input",
        "description": "Synchronization input whose high level must be between 1.5V and 5V and whose low level must be below 0.4V."
      },
      {
        "number": "20",
        "name": "GND",
        "type": "power_in",
        "description": "Ground pin that must be soldered directly to the local ground plane."
      },
      {
        "number": "21",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad is GND and must be soldered to the PCB."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: The datasheet gives no explicit ERC classes. Types for VC, PG, IMON, RT and SS were inferred from th"
        ],
        "pages_sent": 10,
        "cost_usd": 0.0246,
        "at": "2026-10-28T15:36:31"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/8714f.pdf",
        "pages": 36,
        "sha256": "7b11b2ddef6206c9",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 21,
        "described": 21,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt8714efe-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "b58088d0ffa03628d499738164886ab4dc512e1e22fe8bc294d223b9f0804a73",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt8714efe-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          6.41,
          6.5,
          1.2
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f7f29006d026b36a35a3407e1e7f611c07a9c60ff10f4eda9eb4fe6c0da4194b",
        "checked": "2026-10-28",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}