Generated by kicad-footprint-generator · KiCad file format 20260206
LT8714EFE#PBF
Analog Devices · DC-DC Controllers · TSSOP-20-EP
LT8714EFE#PBF from Analog Devices, in a TSSOP-20-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | input | Feedback input; a resistor from FB to VOUT is set by RFB = 7250Ω • (VOUT - VCTRL)/(VCTRL - 0.6065). |
| 2 | VC | output | Error amplifier output that requires an external compensation network. |
| 3 | SS | passive | Soft-start pin charged through an internal 260k resistor to about 2.7V; its capacitor must be at least 5× the IMON capacitor. |
| 4 | PG | output | Active-high open-drain power good output that needs a pull-up; power is good when VFB is within ±60mV of VCTRL, with PG voltage limited to -0.3V to 7V and PG current to ±1mA. |
| 5 | IMON | output | Output current monitor with VIMON = 12.14 • (VISP - VISN + 49.9mV) that must be filtered by 10nF to 100nF and must not be resistively loaded. |
| 6 | ISN | input | Kelvin-connected output current sense negative input that limits the sense voltage across the sense resistor to 50mV typical; voltage range up to 80V. |
| 7 | ISP | input | Kelvin-connected output current sense positive input; ISP voltage is limited to ISN - 0.4V to ISN + 2V. |
| 8 | BIAS | power_in | Top gate driver supply connected to the input supply VIN and locally bypassed; rated to 80V. |
| 9 | INTVEE | power_out | Regulator output at 6.18V below BIAS (typical) that needs a minimum 2.2µF bypass to BIAS and sets the bottom rail of the TG driver. |
| 10 | TG | output | PFET gate drive with low level BIAS - INTVEE and high level BIAS. |
| 11 | BG | output | NFET gate drive with low level GND and high level INTVCC. |
| 12 | INTVCC | power_out | 6.3V input LDO regulator output that needs a minimum 2.2µF bypass to GND and allows a maximum 5mA external load. |
| 13 | VIN | power_in | Input supply pin with a minimum operating voltage of 4.5V (typical) and an absolute maximum of 80V. |
| 14 | CSN | input | NFET current sense negative input; the negative sense voltage at low duty cycle is -32mV (typical). |
| 15 | CSP | input | NFET current sense positive input; the maximum positive sense voltage at low duty cycle is 66mV (typical). |
| 16 | EN | input | Enable input that shuts the chip down below 0.3V and activates it above 1.3V (typical); it must not float and is rated to 80V. |
| 17 | CTRL | input | Output voltage control input that accepts 0.1V to 1.1V; FB regulates to about 1.213V if CTRL exceeds 1.213V and to about 0V if CTRL is below 0V. |
| 18 | RT | passive | Timing resistor pin that sets the switching frequency between 100kHz and 750kHz; it must not float. |
| 19 | SYNC | input | Synchronization input whose high level must be between 1.5V and 5V and whose low level must be below 0.4V. |
| 20 | GND | power_in | Ground pin that must be soldered directly to the local ground plane. |
| 21 | GND | power_in | Exposed pad is GND and must be soldered to the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSSOP-20-EP |
| Category | Power Supply Chip |
| Pins | 21 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Absolute maximum VIN voltage | VIN | -0.3 | 80 | V | 2 | ||
| Absolute maximum BIAS voltage | BIAS | -0.3 | 80 | V | 2 | ||
| Absolute maximum EN voltage | EN | -0.3 | 80 | V | 2 | ||
| Absolute maximum RT voltage | RT | -0.3 | 5 | V | 2 | ||
| Absolute maximum SS voltage | SS | -0.3 | 3 | V | 2 | ||
| Absolute maximum FB voltage | FB | -0.3 | 5 | V | 2 | ||
| Absolute maximum VC voltage | VC | -0.3 | 2 | V | 2 | ||
| Absolute maximum SYNC voltage | SYNC | -0.3 | 5.5 | V | 2 | ||
| Absolute maximum PG voltage | PG | -0.3 | 7 | V | 2 | ||
| Absolute maximum PG current | PG | -1 | 1 | mA | 2 | ||
| Absolute maximum CTRL voltage | CTRL | -0.3 | 5 | V | 2 | ||
| Absolute maximum INTVCC voltage | INTVCC | -0.3 | 7 | V | 2 | ||
| Absolute maximum CSP voltage | CSP | -0.3 | 2 | V | 2 | ||
| Absolute maximum CSN voltage | CSN | -0.3 | 2 | V | 2 | ||
| Absolute maximum ISN voltage | ISN | -0.3 | 80 | V | 2 | ||
| Absolute maximum IMON voltage | IMON | -0.3 | 2.5 | V | 2 | ||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Operating junction temperature range LT8714E | -40 | 125 | °C | LT8714E | 2 | ||
| Maximum junction temperature | TJMAX | 125 | °C | 2 | |||
| Junction-to-ambient thermal resistance | θJA | 38 | °C/W | 2 | |||
| Junction-to-case thermal resistance | θJC | 10 | °C/W | 2 | |||
| Minimum Operating Input Voltage | VIN | 4.25 | 4.5 | V | 3 | ||
| Quiescent Current | IVIN | 4 | 5.5 | mA | Not Switching, VBIAS = 7.5V | 3 | |
| Quiescent Current in Shutdown | 0 | 1 | µA | VEN = 0V | 3 | ||
| EN Chip Enable Threshold EN Rising | 1.22 | 1.3 | 1.38 | V | 3 | ||
| EN Chip Enable Threshold EN Falling | 1.18 | 1.26 | 1.34 | V | 3 | ||
| EN Input Voltage Low Shutdown Mode | 0.3 | V | 3 | ||||
| SS Charge Current | 7 | 10.1 | 13.8 | µA | VSS = 50mV, Current Flowing Out of SS pin | 3 | |
| SS Low Detection Voltage | 18 | 50 | 82 | mV | Part Exiting Undervoltage Lockout | 3 | |
| SS Voltage to Enable Switching SS Rising | 0.75 | 1 | 1.21 | V | 3 | ||
| SS Voltage to Enable Switching SS Falling | 0.65 | 0.92 | 1.15 | V | 3 | ||
| INTVCC Voltage | 6.2 | 6.3 | 6.4 | V | IINTVCC = 10mA | 3 | |
| INTVCC Undervoltage Lockout Rising | 3.88 | 4 | 4.12 | V | INTVCC Rising | 3 | |
| INTVCC Undervoltage Lockout Falling | 3.5 | 3.73 | 3.95 | V | INTVCC Falling | 3 | |
| INTVCC Load Regulation | -0.44 | -2 | % | VIN = 12V, IINTVCC = 0mA to 80mA | 3 | ||
| INTVCC Line Regulation | -0.005 | -0.03 | %/V | 10V ≤ VIN ≤ 80V, IINTVCC = 10mA | 3 | ||
| INTVCC Maximum External Load Current | 5 | mA | 3 | ||||
| INTVEE Voltage, VBIAS, VINTVEE | 6.03 | 6.18 | 6.33 | V | IINTVEE = 10mA | 3 | |
| INTVEE Undervoltage Lockout Rising | 3.24 | 3.42 | 3.6 | V | VBIAS, VINTVEE Rising | 3 | |
| INTVEE Undervoltage Lockout Falling | 2.94 | 3.22 | 3.48 | V | VBIAS, VINTVEE Falling | 3 | |
| IINTVEE Dropout Voltage | VINTVEE | 0.75 | V | VBIAS = 6V, IINTVEE = 10mA | 3 | ||
| Current Limit Voltage, Minimum Duty Cycle | VCSP, VCSN | 60.5 | 66 | 71.5 | mV | VFB = 1.4V, CTRL = 1.1V, Minimum Duty Cycle | 3 |
| Current Limit Voltage, Maximum Duty Cycle | VCSP, VCSN | 40 | 47 | 56 | mV | VFB = 1.4V, CTRL = 1.1V, Maximum Duty Cycle | 3 |
| FB Regulation Voltage | 1.092 | 1.102 | 1.112 | V | CTRL = 1.1V | 3 | |
| FB Regulation Voltage | 0.092 | 0.102 | 0.112 | V | CTRL = 0.1V | 3 | |
| FB Regulation Voltage | 0 | 0.0167 | 0.033 | V | CTRL = 0V | 3 | |
| FB Internal Voltage, V1 | V1 | 0.597 | 0.6065 | 0.616 | V | IFB = 0.0μA | 4 |
| FB Internal Resistance, R1 | R1 | 7.1 | 7.25 | 7.4 | kΩ | 4 | |
| Output Current Sense Regulation Voltage, VISP, VISN | VISP, VISN | 46 | 50 | 54 | mV | VISN = 80V, VFB = 1.4V, CTRL = 1.1V | 4 |
| IMON Regulation Voltage, EA2 | EA2 | 1.184 | 1.208 | 1.233 | V | VFB = 1V | 4 |
| Switching Frequency, fOSC | fOSC | 640 | 750 | 860 | kHz | RT = 46.4k | 4 |
| Switching Frequency, fOSC | fOSC | 85 | 100 | 115 | kHz | RT = 357k | 4 |
| Switching Frequency Range | 100 | 750 | kHz | Free-Running or Synchronizing | 4 | ||
| SYNC High Level for Sync | 1.5 | V | 4 | ||||
| SYNC Low Level for Sync | 0.4 | V | 4 | ||||
| SYNC Clock Pulse Duty Cycle | 20 | 80 | % | VSYNC = 0V to 3V | 4 | ||
| BG and TG Non-Overlap Time, TG Rising to BG Rising | 80 | 140 | 220 | ns | CBG = CTG = 3300pF | 4 | |
| BG and TG Non-Overlap Time, BG Falling to TG Falling | 45 | 90 | 150 | ns | CBG = CTG = 3300pF | 4 | |
| PG Overvoltage Threshold, VFB, CTRL, VFB Rising | 75 | 114 | 155 | mV | 0.1V ≤ CTRL ≤ 1.1V | 5 | |
| PG Undervoltage Threshold, VFB, CTRL, VFB Rising | -100 | -60 | -20 | mV | 0.1V ≤ CTRL ≤ 1.1V | 5 |
CAD (KiCad official)
- Symbol:
LT8714EFE#PBF - Footprint:
Package_SO:TSSOP-20-1EP_4.4x6.5mm_P0.65mm_EP2.15x3.35mm - 3D model: TSSOP-20-EP (KiCad packages3D, STEP)
- 3D model files:
lt8714efe-pbf-etched.step/lt8714efe-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8714efe-pbf.step/lt8714efe-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (36 pp, sha256
7b11b2ddef6206c9, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).