main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8672hddb-trmpbf: viewers · Ray
lt8672hddb-trmpbf-etched.glb Publish 0.1.0 · Ray
lt8672hddb-trmpbf-etched.step lt8672hddb-trmpbf: factory component page (tier=mfr) · Ray
lt8672hddb-trmpbf-hero.glb lt8672hddb-trmpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8672hddb-trmpbf-hero.overlay.json Publish 0.1.0 · Ray
lt8672hddb-trmpbf.glb Publish 0.1.0 · Ray
lt8672hddb-trmpbf.kicad_mod Publish 0.1.0 · Ray
lt8672hddb-trmpbf.kicad_sym Publish 0.1.0 · Ray
lt8672hddb-trmpbf.lbr Publish 0.1.0 · Ray
lt8672hddb-trmpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

LT8672HDDB#TRMPBF

Analog Devices · Gate Drive ICs · DFN-10(2x3)

LT8672HDDB#TRMPBF from Analog Devices, in a DFN-10(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN/UVLO input Shuts down the active rectifier controller and auxiliary boost regulator when below 1.21V; tie to DRAIN if shutdown feature is not used.
2 GND power_in Has no function in the application and should be connected to ground.
3 PG output Open-drain power-good output that pulls low in shutdown, when AUX has not reached regulation at start-up, or when the fast pull-up path is active for more than 17µs.
4 GND power_in Ground of all internal circuitry; tie directly to the local GND plane.
5 NC unconnected Not connected internally; connect to ground or leave floating.
6 AUXSW passive Output of the internal power switch of the auxiliary boost regulator; keep node small and connect the boost inductor between this pin and DRAIN.
7 AUX power_out Auxiliary boost regulator output providing gate drive voltage above input; connect a 1µF capacitor between this pin and DRAIN only.
8 DRAIN power_in Drain voltage sense and supply input (3V to 42V operation); connect close to the external MOSFET drain and bypass with at least 4.7µF.
9 SOURCE input Source connection and return path of the gate fast pull-down, also sensed for gate control; connect close to the external MOSFET source.
10 GATE output Gate drive output connected to the gate of the external N-channel MOSFET.
11 EP passive Exposed pad must be shorted to GND or left floating.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-10(2x3)
Category Power Management
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Drain Voltage 2.85 3 V 4
Total System Quiescent Current (shutdown) 3.5 5 µA VEN/UVLO = 0V 4
EN/UVLO Pin Threshold High 1.22 1.28 1.34 V Pin Voltage Rising 4
EN/UVLO Pin Threshold Low 1.16 1.21 1.26 V Pin Voltage Falling 4
EN/UVLO Pin Current -0.1 0.1 µA VEN/UVLO = 2V 4
PG Pin Leakage -0.1 0.1 µA VPG = 3.3V 4
PG Pull-Down Resistance 650 2000 Ω VPG = 0.1V 4
Auxiliary Regulation Voltage VAUX, VDRAIN 10.2 11 11.8 V 4
Power NMOS Current Limit 75 100 120 mA 4
AUXSW Pin Leakage -0.2 0.2 µA VAUXSW = 12V 4
SOURCE-DRAIN Regulation Voltage 10 20 25 mV 4
SOURCE-DRAIN Fast Pull-Up Threshold 60 75 90 mV 4
Maximum Gate Drive (GATE-SOURCE) 10.2 11 11.8 V 4
Gate Turn-Off Delay Time 0.6 1.1 µs Step (VSOURCE-VDRAIN) from 130mV to −70mV, VGATE-VSOURCE < 1V, CGATE-SOURCE = 10nF 4
Gate Turn-On Delay Time 1.7 3.1 µs Step (VSOURCE-VDRAIN) from −70mV to 130mV, VGATE-VSOURCE > 5V, CGATE-SOURCE = 10nF 4
Max Frequency of AC Input (6VP-P) 50 kHz AC Input Ripple < 6VP-P, CGATE-SOURCE = 10nF 4
Max Frequency of AC Input (2VP-P) 100 kHz AC Input Ripple < 2VP-P, CGATE-SOURCE = 10nF 4
Gate-Source Off Voltage, reverse fault (-5V) 0.01 0.3 V Fault Condition, VSOURCE = -5V, IGATE = 1mA 4
Gate-Source Off Voltage, reverse fault (-40V) 0.01 0.3 V Fault Condition, VSOURCE = -40V, IGATE = 1mA 4
Quiescent Current in Regulation 20 26 µA VEN/UVLO = 2V, Active Rectifier Controller In Regulation (Note 4) 4
Gate Pull-Up Current -50 -26 mA 4
Gate Pull-Down Current 170 300 mA 4
EN/UVLO Pin Hysteresis 70 mV 4
Power NMOS On-Resistance 2 Ω 4
Catch Diode Forward Voltage 0.8 V IDIODE = 100mA 4
DRAIN Current With Gate Driver in Regulation 12 µA 4
DRAIN Pin Voltage -0.3 42 V 2
SOURCE, EN/UVLO Pin Voltage -40 42 V 2
DRAIN-SOURCE Voltage -5 54 V 2
GATE Voltage relative to SOURCE -0.3 17 V VSOURCE, 0.3V to VSOURCE + 17V 2
GATE Voltage relative to AUX -67 0.3 V VAUX, 67V to VAUX + 0.3V 2
PG Pin Voltage -0.3 5 V 2
Operating Junction Temperature Range (H-Grade) TJ -40 150 °C J-, H-Grades 2
Storage Temperature Range -65 150 °C 2
Junction-to-Ambient Thermal Resistance θJA 76 °C/W DDB 10-lead (3mm × 2mm) DFN 2
Junction-to-Case Thermal Resistance θJC 13.5 °C/W DDB 10-lead (3mm × 2mm) DFN 2

CAD (KiCad official)

  • Symbol: LT8672HDDB#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_2x3mm_P0.5mm_EP0.64x2.4mm
  • 3D model: DFN-10(2x3) (KiCad packages3D, STEP)
  • 3D model files: lt8672hddb-trmpbf-etched.step / lt8672hddb-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8672hddb-trmpbf.step / lt8672hddb-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 94aee25d0347fe95, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF