3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT8672HDDB#TRMPBF
Analog Devices · Gate Drive ICs · DFN-10(2x3)
LT8672HDDB#TRMPBF from Analog Devices, in a DFN-10(2x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | EN/UVLO | input | Shuts down the active rectifier controller and auxiliary boost regulator when below 1.21V; tie to DRAIN if shutdown feature is not used. |
| 2 | GND | power_in | Has no function in the application and should be connected to ground. |
| 3 | PG | output | Open-drain power-good output that pulls low in shutdown, when AUX has not reached regulation at start-up, or when the fast pull-up path is active for more than 17µs. |
| 4 | GND | power_in | Ground of all internal circuitry; tie directly to the local GND plane. |
| 5 | NC | unconnected | Not connected internally; connect to ground or leave floating. |
| 6 | AUXSW | passive | Output of the internal power switch of the auxiliary boost regulator; keep node small and connect the boost inductor between this pin and DRAIN. |
| 7 | AUX | power_out | Auxiliary boost regulator output providing gate drive voltage above input; connect a 1µF capacitor between this pin and DRAIN only. |
| 8 | DRAIN | power_in | Drain voltage sense and supply input (3V to 42V operation); connect close to the external MOSFET drain and bypass with at least 4.7µF. |
| 9 | SOURCE | input | Source connection and return path of the gate fast pull-down, also sensed for gate control; connect close to the external MOSFET source. |
| 10 | GATE | output | Gate drive output connected to the gate of the external N-channel MOSFET. |
| 11 | EP | passive | Exposed pad must be shorted to GND or left floating. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-10(2x3) |
| Category | Power Management |
| Pins | 11 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Drain Voltage | 2.85 | 3 | V | 4 | |||
| Total System Quiescent Current (shutdown) | 3.5 | 5 | µA | VEN/UVLO = 0V | 4 | ||
| EN/UVLO Pin Threshold High | 1.22 | 1.28 | 1.34 | V | Pin Voltage Rising | 4 | |
| EN/UVLO Pin Threshold Low | 1.16 | 1.21 | 1.26 | V | Pin Voltage Falling | 4 | |
| EN/UVLO Pin Current | -0.1 | 0.1 | µA | VEN/UVLO = 2V | 4 | ||
| PG Pin Leakage | -0.1 | 0.1 | µA | VPG = 3.3V | 4 | ||
| PG Pull-Down Resistance | 650 | 2000 | Ω | VPG = 0.1V | 4 | ||
| Auxiliary Regulation Voltage | VAUX, VDRAIN | 10.2 | 11 | 11.8 | V | 4 | |
| Power NMOS Current Limit | 75 | 100 | 120 | mA | 4 | ||
| AUXSW Pin Leakage | -0.2 | 0.2 | µA | VAUXSW = 12V | 4 | ||
| SOURCE-DRAIN Regulation Voltage | 10 | 20 | 25 | mV | 4 | ||
| SOURCE-DRAIN Fast Pull-Up Threshold | 60 | 75 | 90 | mV | 4 | ||
| Maximum Gate Drive (GATE-SOURCE) | 10.2 | 11 | 11.8 | V | 4 | ||
| Gate Turn-Off Delay Time | 0.6 | 1.1 | µs | Step (VSOURCE-VDRAIN) from 130mV to −70mV, VGATE-VSOURCE < 1V, CGATE-SOURCE = 10nF | 4 | ||
| Gate Turn-On Delay Time | 1.7 | 3.1 | µs | Step (VSOURCE-VDRAIN) from −70mV to 130mV, VGATE-VSOURCE > 5V, CGATE-SOURCE = 10nF | 4 | ||
| Max Frequency of AC Input (6VP-P) | 50 | kHz | AC Input Ripple < 6VP-P, CGATE-SOURCE = 10nF | 4 | |||
| Max Frequency of AC Input (2VP-P) | 100 | kHz | AC Input Ripple < 2VP-P, CGATE-SOURCE = 10nF | 4 | |||
| Gate-Source Off Voltage, reverse fault (-5V) | 0.01 | 0.3 | V | Fault Condition, VSOURCE = -5V, IGATE = 1mA | 4 | ||
| Gate-Source Off Voltage, reverse fault (-40V) | 0.01 | 0.3 | V | Fault Condition, VSOURCE = -40V, IGATE = 1mA | 4 | ||
| Quiescent Current in Regulation | 20 | 26 | µA | VEN/UVLO = 2V, Active Rectifier Controller In Regulation (Note 4) | 4 | ||
| Gate Pull-Up Current | -50 | -26 | mA | 4 | |||
| Gate Pull-Down Current | 170 | 300 | mA | 4 | |||
| EN/UVLO Pin Hysteresis | 70 | mV | 4 | ||||
| Power NMOS On-Resistance | 2 | Ω | 4 | ||||
| Catch Diode Forward Voltage | 0.8 | V | IDIODE = 100mA | 4 | |||
| DRAIN Current With Gate Driver in Regulation | 12 | µA | 4 | ||||
| DRAIN Pin Voltage | -0.3 | 42 | V | 2 | |||
| SOURCE, EN/UVLO Pin Voltage | -40 | 42 | V | 2 | |||
| DRAIN-SOURCE Voltage | -5 | 54 | V | 2 | |||
| GATE Voltage relative to SOURCE | -0.3 | 17 | V | VSOURCE, 0.3V to VSOURCE + 17V | 2 | ||
| GATE Voltage relative to AUX | -67 | 0.3 | V | VAUX, 67V to VAUX + 0.3V | 2 | ||
| PG Pin Voltage | -0.3 | 5 | V | 2 | |||
| Operating Junction Temperature Range (H-Grade) | TJ | -40 | 150 | °C | J-, H-Grades | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Junction-to-Ambient Thermal Resistance | θJA | 76 | °C/W | DDB 10-lead (3mm × 2mm) DFN | 2 | ||
| Junction-to-Case Thermal Resistance | θJC | 13.5 | °C/W | DDB 10-lead (3mm × 2mm) DFN | 2 |
CAD (KiCad official)
- Symbol:
LT8672HDDB#TRMPBF - Footprint:
Package_DFN_QFN:DFN-10-1EP_2x3mm_P0.5mm_EP0.64x2.4mm - 3D model: DFN-10(2x3) (KiCad packages3D, STEP)
- 3D model files:
lt8672hddb-trmpbf-etched.step/lt8672hddb-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8672hddb-trmpbf.step/lt8672hddb-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
94aee25d0347fe95, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).