main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8619edd-trpbf: viewers · Ray
lt8619edd-trpbf-etched.glb Publish 0.1.0 · Ray
lt8619edd-trpbf-etched.step lt8619edd-trpbf: factory component page (tier=mfr) · Ray
lt8619edd-trpbf-hero.glb lt8619edd-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8619edd-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt8619edd-trpbf.glb Publish 0.1.0 · Ray
lt8619edd-trpbf.kicad_mod Publish 0.1.0 · Ray
lt8619edd-trpbf.kicad_sym Publish 0.1.0 · Ray
lt8619edd-trpbf.lbr Publish 0.1.0 · Ray
lt8619edd-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 11 pins · Ray

LT8619EDD#TRPBF

Analog Devices · DC-DC Converters · TDFN-10-EP(3x3)

LT8619EDD#TRPBF from Analog Devices, in a TDFN-10-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VIN power_in The VIN pin supplies current to the internal circuitry and the internal topside power switch, and the input bypass capacitor should be placed as close as possible to it.
2 EN/UV input The part shuts down when this pin is low and is active when high, with a 1V power-on threshold and a forced-below-0.56V low-current shutdown mode.
3 RT passive A resistor from RT to ground sets the switching frequency, and it must not have an external voltage applied.
4 PG output Open-drain power good output stays low until FB is within ±7.5% of the final regulation voltage, with its pull-up tied to INTVCC, VOUT or an external supply lower than 6V.
5 SYNC input External clock synchronization input that forces forced continuous mode when driven, grounding it selects Burst Mode operation, and floating it selects pulse-skipping mode.
6 FB input The LT8619 regulates this pin to 0.8V, with the feedback divider tap connected here and a phase lead capacitor of typically 4.7pF to 10pF to VOUT, and no external voltage may be applied.
7 BIAS power_in The internal regulator draws current from this pin instead of VIN when it is tied above 3.1V, and for outputs of 3.3V and above it should be tied to VOUT.
8 INTVCC power_out Internal 3.3V regulator output that powers the internal drivers and control circuits, with a maximum output current of 20mA, decoupled with at least 1µF low ESR ceramic, and no external loading allowed.
9 BST passive Provides a drive voltage above the input voltage to the topside power switch, with a 0.1µF boost capacitor placed as close as possible to the IC.
10 SW output Output of the internal power switches that connects to the inductor and boost capacitor, and the node should be kept small on the PCB for good performance.
11 GND power_in Exposed pad ground that must be connected to the negative terminal of the input capacitor and soldered to the PCB to lower thermal resistance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TDFN-10-EP(3x3)
Category Power Supply Chip
Pins 11

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN VIN 60 V 2
EN/UV EN/UV 60 V 2
BIAS BIAS 30 V 2
BST Pin Above SW Pin 4 V 2
PG PG 6 V 2
SYNC SYNC 6 V 2
OUT OUT 6 V 2
FB FB 2 V 2
Operating Junction Temperature (LT8619E) TJ -40 125 °C 2
Storage Temperature Range -65 150 °C 2
VIN Minimum Input Voltage VIN 3 V 3
VIN Quiescent Current at No Load IQ 0.6 1 µA VIN = 12V, VEN/UV = 0V 3
VIN Quiescent Current at No Load (full temperature range) IQ 0.6 3 µA VIN = 12V, VEN/UV = 0V 3
VIN Quiescent Current in Burst Mode IQ 6 10 µA VIN = 12V, VOUT = 3.3V, RT = 66.5k, BIAS = VOUT, VSYNC = 0V 3
VIN Quiescent Current in Burst Mode (full temperature range) IQ 6 18 µA VIN = 12V, VOUT = 3.3V, RT = 66.5k, BIAS = VOUT, VSYNC = 0V 3
VIN Current in Regulation at ILOAD = 100µA IVIN 38 65 µA VIN = 12V, VOUT = 3.3V, RT = 66.5k, BIAS = VOUT, VSYNC = 0V ILOAD = 100µA 3
VIN Current in Regulation at ILOAD = 1mA IVIN 320 400 µA VIN = 12V, VOUT = 3.3V, RT = 66.5k, BIAS = VOUT, VSYNC = 0V ILOAD = 1mA 3
Feedback Voltage (25°C) VFB 0.796 0.8 0.804 V VIN = 12V, VSYNC = INTVCC, No Load 3
Feedback Voltage (full temperature range) VFB 0.788 0.8 0.812 V VIN = 12V, VSYNC = INTVCC, No Load 3
Feedback Voltage Line Regulation -0.03 0.004 0.03 %/V VIN = 4V to 50V, VSYNC = INTVCC (Note 5) 3
Feedback Pin Input Current -20 20 nA VFB = 0.8V 3
Minimum On-Time 30 60 ns ILOAD = 0.5A, VSYNC = INTVCC 3
Minimum Off-Time 100 150 180 ns 3
Top Switch Peak Current Limit 1.5 1.75 2 A 3
Operating Frequency at RT = 162k fOSC 260 300 340 kHz RT = 162k 3
Operating Frequency at RT = 66.5k fOSC 630 700 770 kHz RT = 66.5k 3
Operating Frequency at RT = 20k fOSC 1.9 2 2.1 MHz RT = 20k 3
Synchronization Frequency fSYNC 0.3 2.2 MHz fSYNC ≥ fOSC 3
EN/UV Power-On Threshold 0.94 1 1.1 V EN/UV Rising 4
EN/UV Shutdown Threshold 0.34 0.56 0.92 V EN/UV Falling 4
EN/UV Pin Current -100 100 nA VEN/UV = 2V 4
Positive Power Good Threshold 5 7.5 10 % VFB/VOUT Rising Wrt. Regulated VFB/VOUT 4
Negative Power Good Threshold -10 -7.5 -5 % VFB/VOUT Rising Wrt. Regulated VFB/VOUT 4
PG Leakage -100 100 nA VPG = 3.3V, Power Good 4
PG VOL VOL 0.01 0.3 V IPG = 100µA 4
Operating Frequency Thermal Resistance Junction-to-Ambient (DD package) θJA 43 °C/W DD package 2
Thermal Resistance Junction-to-Case (DD package) θJC 10 °C/W DD package 2

CAD (KiCad official)

  • Symbol: LT8619EDD#TRPBF
  • Footprint: Package_DFN_QFN:DFN-10-1EP_3x3mm_P0.5mm_EP1.55x2.48mm
  • 3D model: TDFN-10-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt8619edd-trpbf-etched.step / lt8619edd-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8619edd-trpbf.step / lt8619edd-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (28 pp, sha256 7156fb4077c7704f, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF