LT8610EMSE#TRPBF

{
  "slug": "lt8610emse-trpbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power management (pmic)",
    "lt8610emse#trpbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt8610emse-trpbf.kicad_sym",
    "lt8610emse-trpbf.kicad_mod",
    "lt8610emse-trpbf.glb",
    "lt8610emse-trpbf.step",
    "lt8610emse-trpbf.lbr",
    "docs/hero.png",
    "docs/lt8610emse-trpbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt8610emse-trpbf-hero.glb",
    "lt8610emse-trpbf-hero.overlay.json",
    "lt8610emse-trpbf-etched.glb"
  ],
  "component": {
    "mpn": "LT8610EMSE#TRPBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-16-EP",
    "pin_count": 17,
    "category": "Power Management (PMIC)",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886348304015360",
    "parts": {
      "symbol": "lt8610emse-trpbf.kicad_sym",
      "footprint": "lt8610emse-trpbf.kicad_mod",
      "model_3d": "lt8610emse-trpbf-hero.glb",
      "model_3d_plain": "lt8610emse-trpbf-etched.glb",
      "model_3d_step": "lt8610emse-trpbf-etched.step",
      "model_3d_step_plain": "lt8610emse-trpbf.step",
      "lbr": "lt8610emse-trpbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C459711",
      "digikey": "LT8610EMSE#TRPBFTR-ND",
      "mouser": "584-LT8610EMSE#TRPBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-18T02:18:44Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT8610EMSE#TRPBFTR-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT8610EMSE#TRPBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "SYNC",
        "type": "input",
        "description": "External clock synchronization input: ground it for Burst Mode operation at low loads, apply a DC voltage of 3V or higher or tie it to INTVCC for pulse-skipping mode, and do not float it."
      },
      {
        "number": "2",
        "name": "TR/SS",
        "type": "passive",
        "description": "Output tracking and soft-start pin: a voltage below 0.97V forces FB to follow TR/SS, an internal 2.2µA pull-up from INTVCC programs the start-up ramp, and an internal 230Ω MOSFET pulls it to ground during shutdown and faults."
      },
      {
        "number": "3",
        "name": "RT",
        "type": "passive",
        "description": "A resistor from RT to ground sets the switching frequency, which the datasheet states is adjustable from 200kHz to 2.2MHz."
      },
      {
        "number": "4",
        "name": "EN/UV",
        "type": "input",
        "description": "The part is shut down when this pin is low and active when high, with a hysteretic threshold of 1.00V rising and 0.96V falling; tie it to VIN if the shutdown feature is not used."
      },
      {
        "number": "5",
        "name": "VIN",
        "type": "power_in",
        "description": "Supplies current to the internal circuitry and the internal top power switch; VIN must be tied together with pin 6, locally bypassed, and VIN is rated to 42V absolute maximum."
      },
      {
        "number": "6",
        "name": "VIN",
        "type": "power_in",
        "description": "Supplies current to the internal circuitry and the internal top power switch; it must be tied together with pin 5 and locally bypassed, with VIN rated to 42V absolute maximum."
      },
      {
        "number": "7",
        "name": "PGND",
        "type": "power_in",
        "description": "Power switch ground and return path of the internal bottom-side power switch; it must be tied together with pin 8."
      },
      {
        "number": "8",
        "name": "PGND",
        "type": "power_in",
        "description": "Power switch ground and return path of the internal bottom-side power switch; it must be tied together with pin 7."
      },
      {
        "number": "9",
        "name": "SW",
        "type": "output",
        "description": "Output of the internal power switches; tie SW pins 9, 10 and 11 together and connect them to the inductor and boost capacitor, keeping this node small on the PCB."
      },
      {
        "number": "10",
        "name": "SW",
        "type": "output",
        "description": "Output of the internal power switches; tie together with pins 9 and 11 and connect to the inductor and boost capacitor, keeping this node small on the PCB."
      },
      {
        "number": "11",
        "name": "SW",
        "type": "output",
        "description": "Output of the internal power switches; tie together with pins 9 and 10 and connect to the inductor and boost capacitor, keeping this node small on the PCB."
      },
      {
        "number": "12",
        "name": "BST",
        "type": "passive",
        "description": "Provides the drive voltage for the topside power switch, higher than the input voltage; the 0.1µF boost capacitor must be placed as close as possible to the IC, and the BST pin is rated 4V maximum above the SW pin."
      },
      {
        "number": "13",
        "name": "INTVCC",
        "type": "power_out",
        "description": "Internal 3.4V regulator bypass pin that powers the internal drivers and control circuits; maximum output current is 20mA, it must not be loaded externally, and it needs at least a 1µF low ESR ceramic decoupling capacitor to power ground placed close to the IC."
      },
      {
        "number": "14",
        "name": "BIAS",
        "type": "power_in",
        "description": "Supplies the internal regulator from BIAS instead of VIN when tied above 3.1V; for output voltages of 3.3V and above it should be tied to VOUT, and a different supply needs a 1µF local bypass capacitor, with BIAS rated 30V absolute maximum."
      },
      {
        "number": "15",
        "name": "PG",
        "type": "output",
        "description": "Open-drain power-good output that stays low until FB is within ±9% of the regulation voltage with no fault conditions, and is valid when VIN is above 3.4V regardless of the EN/UV state; the PG pin is rated 42V absolute maximum."
      },
      {
        "number": "16",
        "name": "FB",
        "type": "input",
        "description": "Feedback input that the LT8610 regulates to 0.970V, connected to the feedback resistor divider tap, with a phase lead capacitor (typically 4.7pF to 10pF) connected between FB and VOUT."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad ground that must be connected to the negative terminal of the input capacitor and soldered to the PCB to lower thermal resistance."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-haiku-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin 17 is the exposed pad, which the datasheet names GND (pin 17); it is listed as pin 17 per the da; Pin types for TR/SS, RT and BST are not labelled in the datasheet; they were assigned as passive bas; Some absolute maximum values (BIAS 30V, BST above SW 4V, PG 42V) are taken from the Absolute Maximum"
        ],
        "pages_sent": 7,
        "cost_usd": 0.0642,
        "at": "2026-10-18T02:16:03"
      },
      "datasheet": {
        "url": "https://jlcpcb.com/api/file/downloadByFileSystemAccessId/8588886348304015360",
        "pages": 22,
        "sha256": "142ed1a2842742ea",
        "source_tier": "lcsc"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt8610emse-trpbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          4.039,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt8610emse-trpbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          4.039,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "f97fa9a5a85548b900052f5db2d4ae3ff515a7204ab678b57fda4f031bebe076",
        "checked": "2026-10-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}