main
History Download
Ray Publish 0.1.0 64b19e4

LT8609SEV#PBF

Analog Devices · DC-DC Converters · LQFN-16-EP(3x3)

LT8609SEV#PBF from Analog Devices, in a LQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RT passive A resistor tied between RT and ground sets the switching frequency, within the 200kHz to 2.2MHz oscillator range.
2 INTVCC power_out Internal 3.5V regulator bypass pin with 20mA maximum output current, varying between 2.8V and 3.5V, that needs at least a 1µF low ESR ceramic decoupling capacitor and must not be loaded externally.
3 GND power_in Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance.
4 GND power_in Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance.
5 SW output Output of the internal power switches that connects to the inductor and boost capacitor and should be kept small on the PCB.
6 SW output Output of the internal power switches that connects to the inductor and boost capacitor and should be kept small on the PCB.
7 N/C unconnected Corner pin that is not electrically connected and should be tied to the ground plane for improved mechanical performance during temperature cycling.
8 GND power_in Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance.
9 VIN power_in Supplies the internal circuitry and internal top power switch with a 42V absolute maximum rating and must be locally bypassed close to the pin.
10 VIN power_in Supplies the internal circuitry and internal top power switch with a 42V absolute maximum rating and must be locally bypassed close to the pin.
11 EN/UV input Shuts the regulator down when low and enables it when high, with a hysteretic threshold of 1.05V rising and 1.00V falling, and should be tied to VIN if unused.
12 PG output Open-drain power good output that stays low until FB is within ±8.5% of the regulation voltage with no fault conditions, with a 42V absolute maximum rating.
13 FB input Feedback input that the regulator holds at 0.774V, with the feedback resistor divider tap connected here and a 4V absolute maximum rating.
14 GND power_in Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance.
15 TR/SS input Output tracking and soft-start pin with a 2µA internal pull-up from INTVCC that sets the output ramp rate and is pulled to ground through a 300Ω MOSFET during shutdown and faults, with a 4V absolute maximum rating.
16 SYNC input External clock synchronization input that is grounded for low ripple Burst Mode operation at low loads and has a 6V absolute maximum rating.
17 GND power_in Exposed pad that is GND and must be soldered to the PCB to lower thermal resistance.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFN-16-EP(3x3)
Category Power Supply Chip
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage 2.7 3 3.2 V 3
VIN Quiescent Current IQ 1 5 µA VEN/UV = 0V, VSYNC = 0V 3
VIN Quiescent Current IQ 1.7 12 µA VEN/UV = 2V, Not Switching, VSYNC = 0V, VIN ≤ 36V 3
VIN Current in Regulation 46 90 µA VIN = 6V, VOUT = 2.7V, Output Load = 100µA 3
VIN Current in Regulation 480 700 µA VIN = 6V, VOUT = 2.7V, Output Load = 1mA 3
Feedback Reference Voltage 0.77 0.774 0.778 V VIN = 6V, ILOAD = 100mA 3
Feedback Reference Voltage 0.758 0.774 0.794 V VIN = 6V, ILOAD = 100mA 3
Feedback Voltage Line Regulation 0.02 0.06 %/V VIN = 4.0V to 40V 3
Feedback Pin Input Current -20 20 nA VFB = 1V 3
Minimum On-Time 45 75 ns ILOAD = 1.75A, SYNC = 0V 3
Minimum On-Time 45 60 ns ILOAD = 1.75A, SYNC = 1.9V 3
Minimum Off Time 90 130 ns 3
Oscillator Frequency fSW 155 200 245 kHz RT = 221k, ILOAD = 0.5A 3
Oscillator Frequency fSW 640 700 760 kHz RT = 60.4k, ILOAD = 0.5A 3
Oscillator Frequency fSW 1.925 2 2.075 MHz RT = 18.2k, ILOAD = 0.5A 3
Top Power NMOS Current Limit 3.4 4.75 5.7 A 3
EN/UV Pin Threshold 0.99 1.05 1.11 V EN/UV Rising 3
EN/UV Pin Current -20 20 nA VEN/UV = 2V 3
PG Upper Threshold Offset from VFB 5 8.5 13 % VFB Rising 3
PG Lower Threshold Offset from VFB 5 8.5 13 % VFB Falling 3
PG Leakage -200 200 nA VPG = 42V 3
PG Pull-Down Resistance 550 1200 Ω VPG = 0.1V 3
Sync Low Input Voltage 0.4 0.9 V 3
Sync High Input Voltage 2.7 3.2 V INTVCC = 3.5V 3
TR/SS Source Current 1 2 3 µA 3
TR/SS Pull-Down Resistance 300 900 Ω Fault Condition, TR/SS = 0.1V 3
Spread Spectrum Modulation Frequency 0.5 3 6 kHz VSYNC = 3.3V 3
VIN, EN/UV, PG voltage 42 V 2
FB, TR/SS voltage 4 V 2
SYNC Voltage 6 V 2
Operating Junction Temperature Range TJ -40 125 °C LT8609SE 2
Storage Temperature Range -65 150 °C 2
Thermal resistance junction to ambient θJA 50 °C/W JEDEC board 2
Thermal resistance junction to case (pad) θJC(PAD) 14 °C/W JEDEC board 2
Thermal resistance junction to ambient θJA 31 °C/W DEMOBOARD 2

CAD (KiCad official)

  • Symbol: LT8609SEV#PBF
  • Footprint: Package_DFN_QFN:LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: LQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: lt8609sev-pbf-etched.step / lt8609sev-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8609sev-pbf.step / lt8609sev-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 a86ed176e7c13476, retrieved 2026-11-02, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF