Generated by kicad-footprint-generator · KiCad file format 20260206
LT8609SEV#PBF
Analog Devices · DC-DC Converters · LQFN-16-EP(3x3)
LT8609SEV#PBF from Analog Devices, in a LQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RT | passive | A resistor tied between RT and ground sets the switching frequency, within the 200kHz to 2.2MHz oscillator range. |
| 2 | INTVCC | power_out | Internal 3.5V regulator bypass pin with 20mA maximum output current, varying between 2.8V and 3.5V, that needs at least a 1µF low ESR ceramic decoupling capacitor and must not be loaded externally. |
| 3 | GND | power_in | Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance. |
| 4 | GND | power_in | Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance. |
| 5 | SW | output | Output of the internal power switches that connects to the inductor and boost capacitor and should be kept small on the PCB. |
| 6 | SW | output | Output of the internal power switches that connects to the inductor and boost capacitor and should be kept small on the PCB. |
| 7 | N/C | unconnected | Corner pin that is not electrically connected and should be tied to the ground plane for improved mechanical performance during temperature cycling. |
| 8 | GND | power_in | Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance. |
| 9 | VIN | power_in | Supplies the internal circuitry and internal top power switch with a 42V absolute maximum rating and must be locally bypassed close to the pin. |
| 10 | VIN | power_in | Supplies the internal circuitry and internal top power switch with a 42V absolute maximum rating and must be locally bypassed close to the pin. |
| 11 | EN/UV | input | Shuts the regulator down when low and enables it when high, with a hysteretic threshold of 1.05V rising and 1.00V falling, and should be tied to VIN if unused. |
| 12 | PG | output | Open-drain power good output that stays low until FB is within ±8.5% of the regulation voltage with no fault conditions, with a 42V absolute maximum rating. |
| 13 | FB | input | Feedback input that the regulator holds at 0.774V, with the feedback resistor divider tap connected here and a 4V absolute maximum rating. |
| 14 | GND | power_in | Ground pin that must connect to the negative terminal of the input capacitor and be soldered to the PCB to lower thermal resistance. |
| 15 | TR/SS | input | Output tracking and soft-start pin with a 2µA internal pull-up from INTVCC that sets the output ramp rate and is pulled to ground through a 300Ω MOSFET during shutdown and faults, with a 4V absolute maximum rating. |
| 16 | SYNC | input | External clock synchronization input that is grounded for low ripple Burst Mode operation at low loads and has a 6V absolute maximum rating. |
| 17 | GND | power_in | Exposed pad that is GND and must be soldered to the PCB to lower thermal resistance. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFN-16-EP(3x3) |
| Category | Power Supply Chip |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | 2.7 | 3 | 3.2 | V | 3 | ||
| VIN Quiescent Current | IQ | 1 | 5 | µA | VEN/UV = 0V, VSYNC = 0V | 3 | |
| VIN Quiescent Current | IQ | 1.7 | 12 | µA | VEN/UV = 2V, Not Switching, VSYNC = 0V, VIN ≤ 36V | 3 | |
| VIN Current in Regulation | 46 | 90 | µA | VIN = 6V, VOUT = 2.7V, Output Load = 100µA | 3 | ||
| VIN Current in Regulation | 480 | 700 | µA | VIN = 6V, VOUT = 2.7V, Output Load = 1mA | 3 | ||
| Feedback Reference Voltage | 0.77 | 0.774 | 0.778 | V | VIN = 6V, ILOAD = 100mA | 3 | |
| Feedback Reference Voltage | 0.758 | 0.774 | 0.794 | V | VIN = 6V, ILOAD = 100mA | 3 | |
| Feedback Voltage Line Regulation | 0.02 | 0.06 | %/V | VIN = 4.0V to 40V | 3 | ||
| Feedback Pin Input Current | -20 | 20 | nA | VFB = 1V | 3 | ||
| Minimum On-Time | 45 | 75 | ns | ILOAD = 1.75A, SYNC = 0V | 3 | ||
| Minimum On-Time | 45 | 60 | ns | ILOAD = 1.75A, SYNC = 1.9V | 3 | ||
| Minimum Off Time | 90 | 130 | ns | 3 | |||
| Oscillator Frequency | fSW | 155 | 200 | 245 | kHz | RT = 221k, ILOAD = 0.5A | 3 |
| Oscillator Frequency | fSW | 640 | 700 | 760 | kHz | RT = 60.4k, ILOAD = 0.5A | 3 |
| Oscillator Frequency | fSW | 1.925 | 2 | 2.075 | MHz | RT = 18.2k, ILOAD = 0.5A | 3 |
| Top Power NMOS Current Limit | 3.4 | 4.75 | 5.7 | A | 3 | ||
| EN/UV Pin Threshold | 0.99 | 1.05 | 1.11 | V | EN/UV Rising | 3 | |
| EN/UV Pin Current | -20 | 20 | nA | VEN/UV = 2V | 3 | ||
| PG Upper Threshold Offset from VFB | 5 | 8.5 | 13 | % | VFB Rising | 3 | |
| PG Lower Threshold Offset from VFB | 5 | 8.5 | 13 | % | VFB Falling | 3 | |
| PG Leakage | -200 | 200 | nA | VPG = 42V | 3 | ||
| PG Pull-Down Resistance | 550 | 1200 | Ω | VPG = 0.1V | 3 | ||
| Sync Low Input Voltage | 0.4 | 0.9 | V | 3 | |||
| Sync High Input Voltage | 2.7 | 3.2 | V | INTVCC = 3.5V | 3 | ||
| TR/SS Source Current | 1 | 2 | 3 | µA | 3 | ||
| TR/SS Pull-Down Resistance | 300 | 900 | Ω | Fault Condition, TR/SS = 0.1V | 3 | ||
| Spread Spectrum Modulation Frequency | 0.5 | 3 | 6 | kHz | VSYNC = 3.3V | 3 | |
| VIN, EN/UV, PG voltage | 42 | V | 2 | ||||
| FB, TR/SS voltage | 4 | V | 2 | ||||
| SYNC Voltage | 6 | V | 2 | ||||
| Operating Junction Temperature Range | TJ | -40 | 125 | °C | LT8609SE | 2 | |
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal resistance junction to ambient | θJA | 50 | °C/W | JEDEC board | 2 | ||
| Thermal resistance junction to case (pad) | θJC(PAD) | 14 | °C/W | JEDEC board | 2 | ||
| Thermal resistance junction to ambient | θJA | 31 | °C/W | DEMOBOARD | 2 |
CAD (KiCad official)
- Symbol:
LT8609SEV#PBF - Footprint:
Package_DFN_QFN:LQFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: LQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
lt8609sev-pbf-etched.step/lt8609sev-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8609sev-pbf.step/lt8609sev-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
a86ed176e7c13476, retrieved 2026-11-02, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).