main
Ray
Publish 0.1.0
2b0ba8d
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210
{
"slug": "lt8606imse-trpbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices DC-DC Converters, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lt8606imse#trpbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt8606imse-trpbf.kicad_sym",
"lt8606imse-trpbf.kicad_mod",
"lt8606imse-trpbf.glb",
"lt8606imse-trpbf.step",
"lt8606imse-trpbf.lbr",
"docs/hero.png",
"docs/lt8606imse-trpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt8606imse-trpbf-hero.glb",
"lt8606imse-trpbf-hero.overlay.json",
"lt8606imse-trpbf-etched.glb"
],
"component": {
"mpn": "LT8606IMSE#TRPBF",
"manufacturer": "Analog Devices",
"package": "MSOP-10-EP",
"pin_count": 11,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/LT8606-8606B.pdf",
"parts": {
"symbol": "lt8606imse-trpbf.kicad_sym",
"footprint": "lt8606imse-trpbf.kicad_mod",
"model_3d": "lt8606imse-trpbf-hero.glb",
"model_3d_plain": "lt8606imse-trpbf-etched.glb",
"model_3d_step": "lt8606imse-trpbf-etched.step",
"model_3d_step_plain": "lt8606imse-trpbf.step",
"lbr": "lt8606imse-trpbf.lbr"
},
"distributor_links": {
"lcsc": "C673952",
"digikey": "505-LT8606IMSE#TRPBFTR-ND",
"mouser": "584-LT8606IMSETRPBF"
},
"distributor_check": {
"checked_at": "2026-10-28T15:38:10Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT8606IMSE#TRPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT8606IMSETRPBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "BST",
"type": "power_out",
"description": "Provides a drive voltage higher than the input voltage to the topside power switch, so a 0.1µF boost capacitor must be placed as close as possible to the IC with no series resistor."
},
{
"number": "2",
"name": "SW",
"type": "output",
"description": "Output of the internal power switches that connects to the inductor and boost capacitor, and this node should be kept small on the PCB for good performance."
},
{
"number": "3",
"name": "INTVCC",
"type": "power_out",
"description": "Internal 3.5V regulator bypass pin with maximum output current of 20mA that varies between 2.8V and 3.5V, to be decoupled with at least a 1µF low ESR ceramic capacitor and not loaded externally."
},
{
"number": "4",
"name": "RT",
"type": "passive",
"description": "A resistor tied between RT and ground sets the switching frequency, and when synchronizing it must set the frequency at or below the lowest synchronization input."
},
{
"number": "5",
"name": "SYNC",
"type": "input",
"description": "External clock synchronization input (MSOP only) that is grounded for Burst Mode operation, left floating for pulse-skipping mode, or tied to a clock or to a voltage between 3.2V and 5.0V for pulse-skipping with spread spectrum."
},
{
"number": "6",
"name": "FB",
"type": "input",
"description": "The LT8606 regulates this pin to 0.778V, and the feedback resistor divider tap connects to it."
},
{
"number": "7",
"name": "TR/SS",
"type": "passive",
"description": "Output tracking and soft-start pin (MSOP only) with an internal 2µA pull-up from INTVCC, pulled to ground through a 300Ω MOSFET during shutdown and fault conditions, so a series resistor is needed when driven from a low impedance output."
},
{
"number": "8",
"name": "PG",
"type": "output",
"description": "Open-drain power good output that remains low until FB is within ±8.5% of the regulation voltage with no fault conditions, and is pulled low when VIN is above 3.2V and EN/UV is low."
},
{
"number": "9",
"name": "VIN",
"type": "power_in",
"description": "Supplies current to the internal circuitry and the internal topside power switch, and must be locally bypassed with the input capacitor positive terminal placed as close as possible to the VIN pins."
},
{
"number": "10",
"name": "EN/UV",
"type": "input",
"description": "Shuts the LT8606 down when low and enables it when high, with a hysteretic threshold of 1.05V rising and 1.00V falling, and it is tied to VIN if the shutdown feature is not used."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed pad that must be connected to the negative terminal of the input capacitor and soldered to the PCB to lower the thermal resistance."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [],
"pages_sent": 9,
"cost_usd": 0.0209,
"at": "2026-10-28T15:37:51"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/LT8606-8606B.pdf",
"pages": 24,
"sha256": "cfaa3e87d6a68cc5",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt8606imse-trpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt8606imse-trpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "3250a636dde878454f38fc9e7f982991934867e648efcbdca96e1e2c3f3424bd",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}