main
Ray
Publish 0.1.0
da305ff
LT8582EDKD#TRPBF
Analog Devices · DC-DC Converters · DFN-24-EP(4x7)
LT8582EDKD#TRPBF from Analog Devices, in a DFN-24-EP(4x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SWA1 | output | Channel 1 master NPN switch collector, designed to handle a peak collector current of 1.7A (minimum), with trace area minimized to reduce EMI. |
| 2 | VIN1 | power_in | Channel 1 input supply pin that must be locally bypassed, with the part operating from 2.5V to 22V. |
| 3 | PG1 | output | Channel 1 open-drain active-high power good output that indicates FBX is within 4% of regulation and requires a pull-up resistor; valid only when SHDN > 1.31V and VIN > 2.3V. |
| 4 | GATE1 | output | Channel 1 PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with a maximum pull-down current of 1mA. |
| 5 | VC1 | passive | Channel 1 error amplifier output pin to which the external compensation network is tied. |
| 6 | FBX1 | input | Channel 1 positive and negative feedback pin, tied through a resistor to VOUT per the stated equations, with positive feedback voltage of 1.185V to 1.220V. |
| 7 | FBX2 | input | Channel 2 positive and negative feedback pin, tied through a resistor to VOUT per the stated equations, with positive feedback voltage of 1.185V to 1.220V. |
| 8 | VC2 | passive | Channel 2 error amplifier output pin to which the external compensation network is tied. |
| 9 | GATE2 | output | Channel 2 PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with a maximum pull-down current of 1mA. |
| 10 | PG2 | output | Channel 2 open-drain active-high power good output that indicates FBX is within 4% of regulation and requires a pull-up resistor; valid only when SHDN > 1.31V and VIN > 2.3V. |
| 11 | VIN2 | power_in | Channel 2 input supply pin that must be locally bypassed, with the part operating from 2.5V to 22V. |
| 12 | SWA2 | output | Channel 2 master NPN switch collector, designed to handle a peak collector current of 1.7A (minimum), with trace area minimized to reduce EMI. |
| 13 | SWB2 | output | Channel 2 slave NPN switch collector, designed to handle a peak collector current of 1.3A (minimum), with trace area minimized to reduce EMI. |
| 14 | CLKOUT2 | output | Channel 2 clock output in phase with the internal oscillator or SYNC pin with duty cycle varying with junction temperature, meant to drive capacitive loads up to 120pF only. |
| 15 | SHDN2 | input | Channel 2 shutdown pin that disables the channel below 0.3V and activates it above 1.31V (typical), must not be floated. |
| 16 | RT2 | passive | Channel 2 timing resistor pin that sets the fixed free-running switching frequency when a resistor is placed to ground; must not be floated. |
| 17 | SS2 | passive | Channel 2 soft-start pin for the soft-start capacitor, charged by a nominally 250k resistor to about 2.1V at start-up. |
| 18 | SYNC2 | input | Channel 2 synchronization input whose high level must exceed 1.3V and low level must be less than 0.4V; driving below 0.4V reverts to the internal free-running clock. |
| 19 | SYNC1 | input | Channel 1 synchronization input whose high level must exceed 1.3V and low level must be less than 0.4V; driving below 0.4V reverts to the internal free-running clock. |
| 20 | SS1 | passive | Channel 1 soft-start pin for the soft-start capacitor, charged by a nominally 250k resistor to about 2.1V at start-up. |
| 21 | RT1 | passive | Channel 1 timing resistor pin that sets the fixed free-running switching frequency when a resistor is placed to ground; must not be floated. |
| 22 | SHDN1 | input | Channel 1 shutdown pin that disables the channel below 0.3V and activates it above 1.31V (typical), must not be floated. |
| 23 | CLKOUT1 | output | Channel 1 clock output 180° out of phase with the internal oscillator or SYNC pin with fixed ~50% duty cycle, meant to drive capacitive loads up to 120pF only. |
| 24 | SWB1 | output | Channel 1 slave NPN switch collector, designed to handle a peak collector current of 1.3A (minimum), with trace area minimized to reduce EMI. |
| 25 | GND | power_in | Exposed pad ground that must be soldered directly to the local ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-24-EP(4x7) |
| Category | Power Supply Chip |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | VIN | 2.3 | 2.5 | V | Over full operating temperature range (l) | 3 | |
| VIN Overvoltage Lockout | 22.2 | 24.5 | 27 | V | 3 | ||
| Positive Feedback Voltage | 1.185 | 1.204 | 1.22 | V | Over full operating temperature range (l) | 3 | |
| Negative Feedback Voltage | 2 | 7 | 16 | mV | Over full operating temperature range (l) | 3 | |
| Positive FBX Pin Bias Current | 81 | 83.3 | 85 | μA | VFBX = Positive Feedback Voltage, current into pin; l | 3 | |
| Negative FBX Pin Bias Current | 81 | 83.3 | 85.5 | μA | VFBX = Negative Feedback Voltage, current out of pin; l | 3 | |
| Quiescent Current | 2.1 | 2.5 | mA | VSHDN = 2.5V, Not Switching | 3 | ||
| Quiescent Current in Shutdown | 0 | 1 | μA | VSHDN = 0 | 3 | ||
| Reference Line Regulation | 0.01 | 0.05 | %/V | 2.5V ≤ VIN ≤ 20V | 3 | ||
| Switching Frequency fOSC | fOSC | 2.125 | 2.5 | 2.875 | MHz | RT = 31.6kΩ; l | 3 |
| Switching Frequency fOSC | fOSC | 170 | 200 | 230 | kHz | RT = 407kΩ; l | 3 |
| Switching Frequency Range | 200 | 2500 | kHz | Free-running or synchronizing; l | 3 | ||
| SYNC High Level for Sync | 1.3 | V | l | 3 | |||
| SYNC Low Level for Sync | 0.4 | V | l | 3 | |||
| SYNC Clock Pulse Duty Cycle | 20 | 80 | % | VSYNC = 0V to 2V | 3 | ||
| SWA Current Limit, minimum duty cycle | 1.8 | 2.4 | 3 | A | Minimum duty cycle; l | 3 | |
| SWA Current Limit, maximum duty cycle | 1.3 | 1.8 | 2.5 | A | Maximum duty cycle; l | 3 | |
| SWA FAULT Current Limit, minimum duty cycle | 2.2 | 2.8 | 3.5 | A | Minimum duty cycle; l | 3 | |
| SWA FAULT Current Limit, maximum duty cycle | 1.6 | 2.3 | 3 | A | Maximum duty cycle; l | 3 | |
| SWA + SWB Current Limit, minimum duty cycle | 3.3 | 4.3 | 5.4 | A | ISWB/ISWA = 0.79; minimum duty cycle; l | 3 | |
| SWA + SWB Current Limit, maximum duty cycle | 2.3 | 4.1 | 4.5 | A | ISWB/ISWA = 0.79; maximum duty cycle; l | 3 | |
| SWA + SWB FAULT Current Limit, minimum duty cycle | 4 | 5 | 6.3 | A | ISWB/ISWA = 0.79; minimum duty cycle; l | 3 | |
| SWA + SWB FAULT Current Limit, maximum duty cycle | 2.8 | 4 | 5.4 | A | ISWB/ISWA = 0.79; maximum duty cycle; l | 3 | |
| SWA Leakage Current | 0.01 | 1 | μA | VSWA = 5V, VSHDN = 0 | 3 | ||
| SWB Leakage Current | 0.01 | 1 | μA | VSWB = 5V, VSHDN = 0 | 3 | ||
| SS Charge Current | 5.7 | 8.8 | 11.7 | μA | VSS = 30mV, current flows out of SS pin; l | 3 | |
| SS Discharge Current | 5.7 | 8.8 | 11.7 | μA | Part in FAULT, VSS = 2.1V, current flows into SS pin; l | 3 | |
| SS High Detection Voltage | 1.65 | 1.84 | 2 | V | Part in FAULT; l | 3 | |
| SS Low Detection Voltage | 15 | 55 | 100 | mV | Part exiting FAULT; l | 3 | |
| SHDN Minimum Input Voltage High, active mode, SHDN rising | 1.26 | 1.31 | 1.4 | V | Active mode, SHDN rising; l | 3 | |
| SHDN Minimum Input Voltage High, active mode, SHDN falling | 1.21 | 1.27 | 1.35 | V | Active mode, SHDN falling; l | 3 | |
| SHDN Input Voltage Low | 0.3 | V | Shutdown mode; l | 3 | |||
| SHDN Pin Bias Current | 10.1 | 12.1 | 14.1 | μA | VSHDN = 3V | 4 | |
| SHDN Pin Bias Current | 45 | 65 | μA | VSHDN = 1.3V | 4 | ||
| SHDN Pin Bias Current | 0 | 0.1 | μA | VSHDN = 0V | 4 | ||
| CLKOUT Output Voltage High | 1.9 | 2.1 | 2.3 | V | 1mA out of CLKOUT pin | 4 | |
| CLKOUT Output Voltage Low | 30 | 200 | mV | 1mA into CLKOUT pin | 4 | ||
| GATE Pull-Down Current | 0.8 | 1 | 1.2 | mA | VGATE = 3V; l | 4 | |
| GATE Leakage Current | 0.01 | 1 | μA | VGATE = 50V, GATE off | 4 | ||
| PG Threshold for Positive Feedback Voltage | 1.09 | 1.15 | 1.2 | V | VFBX rising | 4 | |
| PG Threshold for Negative Feedback Voltage | 20 | 65 | 120 | mV | VFBX falling | 4 | |
| PG Output Voltage Low | 70 | 150 | mV | 100μA into PG pin, VFBX = 1V; l | 4 | ||
| PG Leakage Current | 0.01 | 1 | μA | VPG = 40V, VFBX = 1.204V | 4 | ||
| VIN1 Voltage | -0.3 | 40 | V | Channel 1 (channel 2 identical) | 2 | ||
| SWA1/SWB1 Voltage | -0.4 | 42 | V | Channel 1 (channel 2 identical) | 2 | ||
| RT1 Voltage | -0.3 | 5 | V | Channel 1 (channel 2 identical) | 2 | ||
| SS1 Voltage | -0.3 | 2.5 | V | Channel 1 (channel 2 identical) | 2 | ||
| FBX1 Voltage | -0.3 | 5 | V | Channel 1 (channel 2 identical) | 2 | ||
| VC1 Voltage | -0.3 | 2 | V | Channel 1 (channel 2 identical) | 2 | ||
| SHDN1 Voltage | 40 | V | Channel 1 (channel 2 identical) | 2 | |||
| SHDN1 Current | -1 | mA | Channel 1 (channel 2 identical) | 2 | |||
| SYNC1 Voltage | -0.3 | 5.5 | V | Channel 1 (channel 2 identical) | 2 | ||
| GATE1 Voltage | -0.3 | 60 | V | Channel 1 (channel 2 identical) | 2 | ||
| PG1 Voltage | -0.3 | 40 | V | Channel 1 (channel 2 identical) | 2 | ||
| PG1 Current | -0.5 | 0.5 | mA | Channel 1 (channel 2 identical) | 2 | ||
| Operating Junction Temperature Range (LT8582E) | -40 | 125 | °C | LT8582E grade | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Thermal Resistance, junction to ambient | θJA | 34 | °C/W | 2 | |||
| Thermal Resistance, junction to case | θJC | 7 | °C/W | 2 |
CAD (KiCad official)
- Symbol:
LT8582EDKD#TRPBF - Footprint:
Package_DFN_QFN:DFN-24-1EP_4x7mm_P0.5mm_EP2.64x6.44mm - 3D model: DFN-24-EP(4x7) (KiCad packages3D, STEP)
- 3D model files:
lt8582edkd-trpbf-etched.step/lt8582edkd-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8582edkd-trpbf.step/lt8582edkd-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (36 pp, sha256
d4cd3a1bf42e8ed8, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT8582EDKD#TRPBF
**Analog Devices** · DC-DC Converters · DFN-24-EP(4x7)
LT8582EDKD#TRPBF from Analog Devices, in a DFN-24-EP(4x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SWA1 | output | Channel 1 master NPN switch collector, designed to handle a peak collector current of 1.7A (minimum), with trace area minimized to reduce EMI. |
| 2 | VIN1 | power_in | Channel 1 input supply pin that must be locally bypassed, with the part operating from 2.5V to 22V. |
| 3 | PG1 | output | Channel 1 open-drain active-high power good output that indicates FBX is within 4% of regulation and requires a pull-up resistor; valid only when SHDN > 1.31V and VIN > 2.3V. |
| 4 | GATE1 | output | Channel 1 PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with a maximum pull-down current of 1mA. |
| 5 | VC1 | passive | Channel 1 error amplifier output pin to which the external compensation network is tied. |
| 6 | FBX1 | input | Channel 1 positive and negative feedback pin, tied through a resistor to VOUT per the stated equations, with positive feedback voltage of 1.185V to 1.220V. |
| 7 | FBX2 | input | Channel 2 positive and negative feedback pin, tied through a resistor to VOUT per the stated equations, with positive feedback voltage of 1.185V to 1.220V. |
| 8 | VC2 | passive | Channel 2 error amplifier output pin to which the external compensation network is tied. |
| 9 | GATE2 | output | Channel 2 PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with a maximum pull-down current of 1mA. |
| 10 | PG2 | output | Channel 2 open-drain active-high power good output that indicates FBX is within 4% of regulation and requires a pull-up resistor; valid only when SHDN > 1.31V and VIN > 2.3V. |
| 11 | VIN2 | power_in | Channel 2 input supply pin that must be locally bypassed, with the part operating from 2.5V to 22V. |
| 12 | SWA2 | output | Channel 2 master NPN switch collector, designed to handle a peak collector current of 1.7A (minimum), with trace area minimized to reduce EMI. |
| 13 | SWB2 | output | Channel 2 slave NPN switch collector, designed to handle a peak collector current of 1.3A (minimum), with trace area minimized to reduce EMI. |
| 14 | CLKOUT2 | output | Channel 2 clock output in phase with the internal oscillator or SYNC pin with duty cycle varying with junction temperature, meant to drive capacitive loads up to 120pF only. |
| 15 | SHDN2 | input | Channel 2 shutdown pin that disables the channel below 0.3V and activates it above 1.31V (typical), must not be floated. |
| 16 | RT2 | passive | Channel 2 timing resistor pin that sets the fixed free-running switching frequency when a resistor is placed to ground; must not be floated. |
| 17 | SS2 | passive | Channel 2 soft-start pin for the soft-start capacitor, charged by a nominally 250k resistor to about 2.1V at start-up. |
| 18 | SYNC2 | input | Channel 2 synchronization input whose high level must exceed 1.3V and low level must be less than 0.4V; driving below 0.4V reverts to the internal free-running clock. |
| 19 | SYNC1 | input | Channel 1 synchronization input whose high level must exceed 1.3V and low level must be less than 0.4V; driving below 0.4V reverts to the internal free-running clock. |
| 20 | SS1 | passive | Channel 1 soft-start pin for the soft-start capacitor, charged by a nominally 250k resistor to about 2.1V at start-up. |
| 21 | RT1 | passive | Channel 1 timing resistor pin that sets the fixed free-running switching frequency when a resistor is placed to ground; must not be floated. |
| 22 | SHDN1 | input | Channel 1 shutdown pin that disables the channel below 0.3V and activates it above 1.31V (typical), must not be floated. |
| 23 | CLKOUT1 | output | Channel 1 clock output 180° out of phase with the internal oscillator or SYNC pin with fixed ~50% duty cycle, meant to drive capacitive loads up to 120pF only. |
| 24 | SWB1 | output | Channel 1 slave NPN switch collector, designed to handle a peak collector current of 1.3A (minimum), with trace area minimized to reduce EMI. |
| 25 | GND | power_in | Exposed pad ground that must be soldered directly to the local ground plane. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-24-EP(4x7) |
| Category | Power Supply Chip |
| Pins | 25 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Minimum Input Voltage | VIN | | 2.3 | 2.5 | V | Over full operating temperature range (l) | 3 |
| VIN Overvoltage Lockout | | 22.2 | 24.5 | 27 | V | | 3 |
| Positive Feedback Voltage | | 1.185 | 1.204 | 1.22 | V | Over full operating temperature range (l) | 3 |
| Negative Feedback Voltage | | 2 | 7 | 16 | mV | Over full operating temperature range (l) | 3 |
| Positive FBX Pin Bias Current | | 81 | 83.3 | 85 | μA | VFBX = Positive Feedback Voltage, current into pin; l | 3 |
| Negative FBX Pin Bias Current | | 81 | 83.3 | 85.5 | μA | VFBX = Negative Feedback Voltage, current out of pin; l | 3 |
| Quiescent Current | | | 2.1 | 2.5 | mA | VSHDN = 2.5V, Not Switching | 3 |
| Quiescent Current in Shutdown | | | 0 | 1 | μA | VSHDN = 0 | 3 |
| Reference Line Regulation | | | 0.01 | 0.05 | %/V | 2.5V ≤ VIN ≤ 20V | 3 |
| Switching Frequency fOSC | fOSC | 2.125 | 2.5 | 2.875 | MHz | RT = 31.6kΩ; l | 3 |
| Switching Frequency fOSC | fOSC | 170 | 200 | 230 | kHz | RT = 407kΩ; l | 3 |
| Switching Frequency Range | | 200 | | 2500 | kHz | Free-running or synchronizing; l | 3 |
| SYNC High Level for Sync | | 1.3 | | | V | l | 3 |
| SYNC Low Level for Sync | | | | 0.4 | V | l | 3 |
| SYNC Clock Pulse Duty Cycle | | 20 | | 80 | % | VSYNC = 0V to 2V | 3 |
| SWA Current Limit, minimum duty cycle | | 1.8 | 2.4 | 3 | A | Minimum duty cycle; l | 3 |
| SWA Current Limit, maximum duty cycle | | 1.3 | 1.8 | 2.5 | A | Maximum duty cycle; l | 3 |
| SWA FAULT Current Limit, minimum duty cycle | | 2.2 | 2.8 | 3.5 | A | Minimum duty cycle; l | 3 |
| SWA FAULT Current Limit, maximum duty cycle | | 1.6 | 2.3 | 3 | A | Maximum duty cycle; l | 3 |
| SWA + SWB Current Limit, minimum duty cycle | | 3.3 | 4.3 | 5.4 | A | ISWB/ISWA = 0.79; minimum duty cycle; l | 3 |
| SWA + SWB Current Limit, maximum duty cycle | | 2.3 | 4.1 | 4.5 | A | ISWB/ISWA = 0.79; maximum duty cycle; l | 3 |
| SWA + SWB FAULT Current Limit, minimum duty cycle | | 4 | 5 | 6.3 | A | ISWB/ISWA = 0.79; minimum duty cycle; l | 3 |
| SWA + SWB FAULT Current Limit, maximum duty cycle | | 2.8 | 4 | 5.4 | A | ISWB/ISWA = 0.79; maximum duty cycle; l | 3 |
| SWA Leakage Current | | | 0.01 | 1 | μA | VSWA = 5V, VSHDN = 0 | 3 |
| SWB Leakage Current | | | 0.01 | 1 | μA | VSWB = 5V, VSHDN = 0 | 3 |
| SS Charge Current | | 5.7 | 8.8 | 11.7 | μA | VSS = 30mV, current flows out of SS pin; l | 3 |
| SS Discharge Current | | 5.7 | 8.8 | 11.7 | μA | Part in FAULT, VSS = 2.1V, current flows into SS pin; l | 3 |
| SS High Detection Voltage | | 1.65 | 1.84 | 2 | V | Part in FAULT; l | 3 |
| SS Low Detection Voltage | | 15 | 55 | 100 | mV | Part exiting FAULT; l | 3 |
| SHDN Minimum Input Voltage High, active mode, SHDN rising | | 1.26 | 1.31 | 1.4 | V | Active mode, SHDN rising; l | 3 |
| SHDN Minimum Input Voltage High, active mode, SHDN falling | | 1.21 | 1.27 | 1.35 | V | Active mode, SHDN falling; l | 3 |
| SHDN Input Voltage Low | | | | 0.3 | V | Shutdown mode; l | 3 |
| SHDN Pin Bias Current | | 10.1 | 12.1 | 14.1 | μA | VSHDN = 3V | 4 |
| SHDN Pin Bias Current | | | 45 | 65 | μA | VSHDN = 1.3V | 4 |
| SHDN Pin Bias Current | | | 0 | 0.1 | μA | VSHDN = 0V | 4 |
| CLKOUT Output Voltage High | | 1.9 | 2.1 | 2.3 | V | 1mA out of CLKOUT pin | 4 |
| CLKOUT Output Voltage Low | | | 30 | 200 | mV | 1mA into CLKOUT pin | 4 |
| GATE Pull-Down Current | | 0.8 | 1 | 1.2 | mA | VGATE = 3V; l | 4 |
| GATE Leakage Current | | | 0.01 | 1 | μA | VGATE = 50V, GATE off | 4 |
| PG Threshold for Positive Feedback Voltage | | 1.09 | 1.15 | 1.2 | V | VFBX rising | 4 |
| PG Threshold for Negative Feedback Voltage | | 20 | 65 | 120 | mV | VFBX falling | 4 |
| PG Output Voltage Low | | | 70 | 150 | mV | 100μA into PG pin, VFBX = 1V; l | 4 |
| PG Leakage Current | | | 0.01 | 1 | μA | VPG = 40V, VFBX = 1.204V | 4 |
| VIN1 Voltage | | -0.3 | | 40 | V | Channel 1 (channel 2 identical) | 2 |
| SWA1/SWB1 Voltage | | -0.4 | | 42 | V | Channel 1 (channel 2 identical) | 2 |
| RT1 Voltage | | -0.3 | | 5 | V | Channel 1 (channel 2 identical) | 2 |
| SS1 Voltage | | -0.3 | | 2.5 | V | Channel 1 (channel 2 identical) | 2 |
| FBX1 Voltage | | -0.3 | | 5 | V | Channel 1 (channel 2 identical) | 2 |
| VC1 Voltage | | -0.3 | | 2 | V | Channel 1 (channel 2 identical) | 2 |
| SHDN1 Voltage | | | | 40 | V | Channel 1 (channel 2 identical) | 2 |
| SHDN1 Current | | -1 | | | mA | Channel 1 (channel 2 identical) | 2 |
| SYNC1 Voltage | | -0.3 | | 5.5 | V | Channel 1 (channel 2 identical) | 2 |
| GATE1 Voltage | | -0.3 | | 60 | V | Channel 1 (channel 2 identical) | 2 |
| PG1 Voltage | | -0.3 | | 40 | V | Channel 1 (channel 2 identical) | 2 |
| PG1 Current | | -0.5 | | 0.5 | mA | Channel 1 (channel 2 identical) | 2 |
| Operating Junction Temperature Range (LT8582E) | | -40 | | 125 | °C | LT8582E grade | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Thermal Resistance, junction to ambient | θJA | | 34 | | °C/W | | 2 |
| Thermal Resistance, junction to case | θJC | | 7 | | °C/W | | 2 |
## CAD (KiCad official)
- Symbol: `LT8582EDKD#TRPBF`
- Footprint: `Package_DFN_QFN:DFN-24-1EP_4x7mm_P0.5mm_EP2.64x6.44mm`
- 3D model: DFN-24-EP(4x7) (KiCad packages3D, STEP)
- 3D model files: `lt8582edkd-trpbf-etched.step` / `lt8582edkd-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt8582edkd-trpbf.step` / `lt8582edkd-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/8582f.pdf) (36 pp, sha256 `d4cd3a1bf42e8ed8`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt8582edkd-trpbf-datasheet.pdf)