main
Download ZIP Propose a change
Made with KiCad 10.0 · needs KiCad 10.0 or later to open · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8582edkd-trpbf: viewers · Ray
lt8582edkd-trpbf-etched.glb Publish 0.1.0 · Ray
lt8582edkd-trpbf-etched.step lt8582edkd-trpbf: factory component page (tier=mfr) · Ray
lt8582edkd-trpbf-hero.glb lt8582edkd-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8582edkd-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt8582edkd-trpbf.glb Publish 0.1.0 · Ray
lt8582edkd-trpbf.kicad_mod Publish 0.1.0 · Ray
lt8582edkd-trpbf.kicad_sym Publish 0.1.0 · Ray
lt8582edkd-trpbf.lbr Publish 0.1.0 · Ray
lt8582edkd-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 25 pins · Ray

LT8582EDKD#TRPBF

Analog Devices · DC-DC Converters · DFN-24-EP(4x7)

LT8582EDKD#TRPBF from Analog Devices, in a DFN-24-EP(4x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SWA1 output Channel 1 master NPN switch collector, designed to handle a peak collector current of 1.7A (minimum), with trace area minimized to reduce EMI.
2 VIN1 power_in Channel 1 input supply pin that must be locally bypassed, with the part operating from 2.5V to 22V.
3 PG1 output Channel 1 open-drain active-high power good output that indicates FBX is within 4% of regulation and requires a pull-up resistor; valid only when SHDN > 1.31V and VIN > 2.3V.
4 GATE1 output Channel 1 PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with a maximum pull-down current of 1mA.
5 VC1 passive Channel 1 error amplifier output pin to which the external compensation network is tied.
6 FBX1 input Channel 1 positive and negative feedback pin, tied through a resistor to VOUT per the stated equations, with positive feedback voltage of 1.185V to 1.220V.
7 FBX2 input Channel 2 positive and negative feedback pin, tied through a resistor to VOUT per the stated equations, with positive feedback voltage of 1.185V to 1.220V.
8 VC2 passive Channel 2 error amplifier output pin to which the external compensation network is tied.
9 GATE2 output Channel 2 PMOS gate drive pull-down current source for output short-circuit protection or output disconnect, with a maximum pull-down current of 1mA.
10 PG2 output Channel 2 open-drain active-high power good output that indicates FBX is within 4% of regulation and requires a pull-up resistor; valid only when SHDN > 1.31V and VIN > 2.3V.
11 VIN2 power_in Channel 2 input supply pin that must be locally bypassed, with the part operating from 2.5V to 22V.
12 SWA2 output Channel 2 master NPN switch collector, designed to handle a peak collector current of 1.7A (minimum), with trace area minimized to reduce EMI.
13 SWB2 output Channel 2 slave NPN switch collector, designed to handle a peak collector current of 1.3A (minimum), with trace area minimized to reduce EMI.
14 CLKOUT2 output Channel 2 clock output in phase with the internal oscillator or SYNC pin with duty cycle varying with junction temperature, meant to drive capacitive loads up to 120pF only.
15 SHDN2 input Channel 2 shutdown pin that disables the channel below 0.3V and activates it above 1.31V (typical), must not be floated.
16 RT2 passive Channel 2 timing resistor pin that sets the fixed free-running switching frequency when a resistor is placed to ground; must not be floated.
17 SS2 passive Channel 2 soft-start pin for the soft-start capacitor, charged by a nominally 250k resistor to about 2.1V at start-up.
18 SYNC2 input Channel 2 synchronization input whose high level must exceed 1.3V and low level must be less than 0.4V; driving below 0.4V reverts to the internal free-running clock.
19 SYNC1 input Channel 1 synchronization input whose high level must exceed 1.3V and low level must be less than 0.4V; driving below 0.4V reverts to the internal free-running clock.
20 SS1 passive Channel 1 soft-start pin for the soft-start capacitor, charged by a nominally 250k resistor to about 2.1V at start-up.
21 RT1 passive Channel 1 timing resistor pin that sets the fixed free-running switching frequency when a resistor is placed to ground; must not be floated.
22 SHDN1 input Channel 1 shutdown pin that disables the channel below 0.3V and activates it above 1.31V (typical), must not be floated.
23 CLKOUT1 output Channel 1 clock output 180° out of phase with the internal oscillator or SYNC pin with fixed ~50% duty cycle, meant to drive capacitive loads up to 120pF only.
24 SWB1 output Channel 1 slave NPN switch collector, designed to handle a peak collector current of 1.3A (minimum), with trace area minimized to reduce EMI.
25 GND power_in Exposed pad ground that must be soldered directly to the local ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-24-EP(4x7)
Category Power Supply Chip
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Minimum Input Voltage VIN 2.3 2.5 V Over full operating temperature range (l) 3
VIN Overvoltage Lockout 22.2 24.5 27 V 3
Positive Feedback Voltage 1.185 1.204 1.22 V Over full operating temperature range (l) 3
Negative Feedback Voltage 2 7 16 mV Over full operating temperature range (l) 3
Positive FBX Pin Bias Current 81 83.3 85 μA VFBX = Positive Feedback Voltage, current into pin; l 3
Negative FBX Pin Bias Current 81 83.3 85.5 μA VFBX = Negative Feedback Voltage, current out of pin; l 3
Quiescent Current 2.1 2.5 mA VSHDN = 2.5V, Not Switching 3
Quiescent Current in Shutdown 0 1 μA VSHDN = 0 3
Reference Line Regulation 0.01 0.05 %/V 2.5V ≤ VIN ≤ 20V 3
Switching Frequency fOSC fOSC 2.125 2.5 2.875 MHz RT = 31.6kΩ; l 3
Switching Frequency fOSC fOSC 170 200 230 kHz RT = 407kΩ; l 3
Switching Frequency Range 200 2500 kHz Free-running or synchronizing; l 3
SYNC High Level for Sync 1.3 V l 3
SYNC Low Level for Sync 0.4 V l 3
SYNC Clock Pulse Duty Cycle 20 80 % VSYNC = 0V to 2V 3
SWA Current Limit, minimum duty cycle 1.8 2.4 3 A Minimum duty cycle; l 3
SWA Current Limit, maximum duty cycle 1.3 1.8 2.5 A Maximum duty cycle; l 3
SWA FAULT Current Limit, minimum duty cycle 2.2 2.8 3.5 A Minimum duty cycle; l 3
SWA FAULT Current Limit, maximum duty cycle 1.6 2.3 3 A Maximum duty cycle; l 3
SWA + SWB Current Limit, minimum duty cycle 3.3 4.3 5.4 A ISWB/ISWA = 0.79; minimum duty cycle; l 3
SWA + SWB Current Limit, maximum duty cycle 2.3 4.1 4.5 A ISWB/ISWA = 0.79; maximum duty cycle; l 3
SWA + SWB FAULT Current Limit, minimum duty cycle 4 5 6.3 A ISWB/ISWA = 0.79; minimum duty cycle; l 3
SWA + SWB FAULT Current Limit, maximum duty cycle 2.8 4 5.4 A ISWB/ISWA = 0.79; maximum duty cycle; l 3
SWA Leakage Current 0.01 1 μA VSWA = 5V, VSHDN = 0 3
SWB Leakage Current 0.01 1 μA VSWB = 5V, VSHDN = 0 3
SS Charge Current 5.7 8.8 11.7 μA VSS = 30mV, current flows out of SS pin; l 3
SS Discharge Current 5.7 8.8 11.7 μA Part in FAULT, VSS = 2.1V, current flows into SS pin; l 3
SS High Detection Voltage 1.65 1.84 2 V Part in FAULT; l 3
SS Low Detection Voltage 15 55 100 mV Part exiting FAULT; l 3
SHDN Minimum Input Voltage High, active mode, SHDN rising 1.26 1.31 1.4 V Active mode, SHDN rising; l 3
SHDN Minimum Input Voltage High, active mode, SHDN falling 1.21 1.27 1.35 V Active mode, SHDN falling; l 3
SHDN Input Voltage Low 0.3 V Shutdown mode; l 3
SHDN Pin Bias Current 10.1 12.1 14.1 μA VSHDN = 3V 4
SHDN Pin Bias Current 45 65 μA VSHDN = 1.3V 4
SHDN Pin Bias Current 0 0.1 μA VSHDN = 0V 4
CLKOUT Output Voltage High 1.9 2.1 2.3 V 1mA out of CLKOUT pin 4
CLKOUT Output Voltage Low 30 200 mV 1mA into CLKOUT pin 4
GATE Pull-Down Current 0.8 1 1.2 mA VGATE = 3V; l 4
GATE Leakage Current 0.01 1 μA VGATE = 50V, GATE off 4
PG Threshold for Positive Feedback Voltage 1.09 1.15 1.2 V VFBX rising 4
PG Threshold for Negative Feedback Voltage 20 65 120 mV VFBX falling 4
PG Output Voltage Low 70 150 mV 100μA into PG pin, VFBX = 1V; l 4
PG Leakage Current 0.01 1 μA VPG = 40V, VFBX = 1.204V 4
VIN1 Voltage -0.3 40 V Channel 1 (channel 2 identical) 2
SWA1/SWB1 Voltage -0.4 42 V Channel 1 (channel 2 identical) 2
RT1 Voltage -0.3 5 V Channel 1 (channel 2 identical) 2
SS1 Voltage -0.3 2.5 V Channel 1 (channel 2 identical) 2
FBX1 Voltage -0.3 5 V Channel 1 (channel 2 identical) 2
VC1 Voltage -0.3 2 V Channel 1 (channel 2 identical) 2
SHDN1 Voltage 40 V Channel 1 (channel 2 identical) 2
SHDN1 Current -1 mA Channel 1 (channel 2 identical) 2
SYNC1 Voltage -0.3 5.5 V Channel 1 (channel 2 identical) 2
GATE1 Voltage -0.3 60 V Channel 1 (channel 2 identical) 2
PG1 Voltage -0.3 40 V Channel 1 (channel 2 identical) 2
PG1 Current -0.5 0.5 mA Channel 1 (channel 2 identical) 2
Operating Junction Temperature Range (LT8582E) -40 125 °C LT8582E grade 2
Storage Temperature Range -65 150 °C 2
Thermal Resistance, junction to ambient θJA 34 °C/W 2
Thermal Resistance, junction to case θJC 7 °C/W 2

CAD (KiCad official)

  • Symbol: LT8582EDKD#TRPBF
  • Footprint: Package_DFN_QFN:DFN-24-1EP_4x7mm_P0.5mm_EP2.64x6.44mm
  • 3D model: DFN-24-EP(4x7) (KiCad packages3D, STEP)
  • 3D model files: lt8582edkd-trpbf-etched.step / lt8582edkd-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8582edkd-trpbf.step / lt8582edkd-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (36 pp, sha256 d4cd3a1bf42e8ed8, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF