main
Ray
Publish 0.1.0
2d5d66d
LT8570HMS8E#PBF
Analog Devices · DC-DC Converters · MSOP-8-EP
LT8570HMS8E#PBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FBX | input | Positive and negative feedback pin: a resistor from FBX to VOUT sets the output voltage using RFBX=(VOUT−1.204V)/83.3µA for a noninverting converter or RFBX=(VOUT+3mV)/83.3µA for an inverting converter, and FBX is rated -1mA to 5V maximum. |
| 2 | VC | passive | Error amplifier output pin where the external compensation network connects, with an absolute maximum rating of -0.3V to 2V. |
| 3 | VIN | power_in | Input supply pin that must be locally bypassed, operating from 2.55V to 40V with an absolute maximum of -0.3V to 40V. |
| 4 | SW | output | Switch pin connected to the collector of the internal NPN power switch, rated -0.4V to 65V, with trace area minimized to reduce EMI. |
| 5 | SHDN | input | Shutdown pin with UVLO function that disables the chip when driven below 1.21V and enables it (restarting soft-start) when driven above 1.40V, rated -0.3V to 40V, and must not be left floating. |
| 6 | RT | passive | Timing resistor pin where a resistor to ground sets the free-running switching frequency, rated -0.3V to 5V, and must not be left floating. |
| 7 | SS | passive | Soft-start pin where a soft-start capacitor is connected; it is charged through a nominal 280k resistor to about 2.1V at start-up, with an absolute maximum of -0.3V to 2.5V. |
| 8 | SYNC | input | Synchronization input where a clock above 1.3V high and below 0.4V low synchronizes the switching frequency, with a rating of -0.3V to 5.5V, and driving it below 0.4V reverts to the internal free-running clock. |
| 9 | GND | power_in | Ground exposed pad that must be soldered directly to the local ground plane. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Power Management |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | 2.9 | 40 | V | -40°C to 150°C (l), H grade | 3 | ||
| Positive Feedback Voltage | 1.185 | 1.204 | 1.22 | V | l: full operating temperature range | 3 | |
| Negative Feedback Voltage | -3 | 3 | 12 | mV | l: full operating temperature range | 3 | |
| Positive FBX Pin Bias Current | 81 | 83.3 | 85 | µA | VFBX = Positive Feedback Voltage, Current Into Pin; l | 3 | |
| Negative FBX Pin Bias Current | 81 | 83.3 | 86 | µA | VFBX = Negative Feedback Voltage, Current Out of Pin; l | 3 | |
| Quiescent Current | 1.2 | 1.7 | mA | VSHDN = 2.5V, Not Switching | 3 | ||
| Quiescent Current in Shutdown | 0 | 1 | µA | VSHDN = 0V | 3 | ||
| Reference Line Regulation | 0.01 | 0.05 | %/V | 2.55V ≤ VIN ≤ 40V | 3 | ||
| Switching Frequency, fOSC | fOSC | 1.23 | 1.5 | 1.77 | MHz | RT = 56.2k; l | 3 |
| Switching Frequency, fOSC | fOSC | 165 | 200 | 235 | kHz | RT = 422k; l | 3 |
| Switching Frequency Set Range | 200 | 1500 | kHz | SYNCing or Free Running; l | 3 | ||
| SYNC High Level for Synchronization | 1.3 | V | l | 3 | |||
| SYNC Low Level for Synchronization | 0.4 | V | l | 3 | |||
| SYNC Clock Pulse Duty Cycle | 35 | 65 | % | VSYNC = 0V to 2V | 3 | ||
| Switch Current Limit, Minimum Duty Cycle (LT8570) | 0.6 | 0.75 | 1 | A | Minimum Duty Cycle (Note 3); l | 3 | |
| Switch Current Limit, Maximum Duty Cycle (LT8570), fOSC = 1.5MHz | 0.27 | 0.5 | 0.85 | A | Maximum Duty Cycle (Notes 3, 4), fOSC = 1.5MHz; l | 3 | |
| Switch Current Limit, Maximum Duty Cycle (LT8570), fOSC = 200kHz | 0.15 | 0.4 | 0.8 | A | Maximum Duty Cycle (Notes 3, 4), fOSC = 200kHz; l | 3 | |
| Switch VCESAT | VCESAT | 250 | mV | ISW = 0.4A (LT8570) | 3 | ||
| Switch Leakage Current | 0.01 | 1 | µA | VSW = 5V | 3 | ||
| Soft-Start Charging Current | 4 | 6 | 8 | µA | VSS = 0.5V; l | 3 | |
| SHDN Minimum Input Voltage High (Active Mode, SHDN Rising) | 1.23 | 1.31 | 1.4 | V | Active Mode, SHDN Rising; l | 3 | |
| SHDN Minimum Input Voltage (Active Mode, SHDN Falling) | 1.21 | 1.27 | 1.33 | V | Active Mode, SHDN Falling; l | 3 | |
| SHDN Input Voltage Low (Shutdown Mode) | 0.3 | V | Shutdown Mode; l | 3 | |||
| SHDN Pin Bias Current | 9 | 12 | 15 | µA | VSHDN = 3V | 3 | |
| SHDN Pin Bias Current | 44 | 56 | µA | VSHDN = 1.3V | 3 | ||
| SHDN Pin Bias Current | 0 | 0.1 | µA | VSHDN = 0V | 3 | ||
| VIN Voltage | VIN | -0.3 | 40 | V | 2 | ||
| SW Voltage | SW | -0.4 | 65 | V | 2 | ||
| RT Voltage | RT | -0.3 | 5 | V | 2 | ||
| SS Voltage | SS | -0.3 | 2.5 | V | 2 | ||
| FBX Voltage | FBX | 5 | V | 2 | |||
| FBX Current | FBX | -1 | mA | 2 | |||
| VC Voltage | VC | -0.3 | 2 | V | 2 | ||
| SHDN Voltage | SHDN | -0.3 | 40 | V | 2 | ||
| SYNC Voltage | SYNC | -0.3 | 5.5 | V | 2 | ||
| Operating Junction Temperature Range (LT8570H) | TJ | -40 | 150 | °C | LT8570H, LT8570-1H (Notes 2, 5) | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance, Junction to Ambient (MSOP exposed pad) | θJA | 35 | 40 | °C/W | MS8E 8-lead plastic MSOP with exposed pad, printed as 35°C/W TO 40°C/W | 2 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | into the system ground plane at the C3 ground terminal. The cut ground copper at D1’s cathode is essential to | 19 |
CAD (KiCad official)
- Symbol:
LT8570HMS8E#PBF - Footprint:
Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm - 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files:
lt8570hms8e-pbf-etched.step/lt8570hms8e-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8570hms8e-pbf.step/lt8570hms8e-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (34 pp, sha256
08f5339c3c365473, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT8570HMS8E#PBF
**Analog Devices** · DC-DC Converters · MSOP-8-EP
LT8570HMS8E#PBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FBX | input | Positive and negative feedback pin: a resistor from FBX to VOUT sets the output voltage using RFBX=(VOUT−1.204V)/83.3µA for a noninverting converter or RFBX=(VOUT+3mV)/83.3µA for an inverting converter, and FBX is rated -1mA to 5V maximum. |
| 2 | VC | passive | Error amplifier output pin where the external compensation network connects, with an absolute maximum rating of -0.3V to 2V. |
| 3 | VIN | power_in | Input supply pin that must be locally bypassed, operating from 2.55V to 40V with an absolute maximum of -0.3V to 40V. |
| 4 | SW | output | Switch pin connected to the collector of the internal NPN power switch, rated -0.4V to 65V, with trace area minimized to reduce EMI. |
| 5 | SHDN | input | Shutdown pin with UVLO function that disables the chip when driven below 1.21V and enables it (restarting soft-start) when driven above 1.40V, rated -0.3V to 40V, and must not be left floating. |
| 6 | RT | passive | Timing resistor pin where a resistor to ground sets the free-running switching frequency, rated -0.3V to 5V, and must not be left floating. |
| 7 | SS | passive | Soft-start pin where a soft-start capacitor is connected; it is charged through a nominal 280k resistor to about 2.1V at start-up, with an absolute maximum of -0.3V to 2.5V. |
| 8 | SYNC | input | Synchronization input where a clock above 1.3V high and below 0.4V low synchronizes the switching frequency, with a rating of -0.3V to 5.5V, and driving it below 0.4V reverts to the internal free-running clock. |
| 9 | GND | power_in | Ground exposed pad that must be soldered directly to the local ground plane. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8-EP |
| Category | Power Management |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating Voltage Range | | 2.9 | | 40 | V | -40°C to 150°C (l), H grade | 3 |
| Positive Feedback Voltage | | 1.185 | 1.204 | 1.22 | V | l: full operating temperature range | 3 |
| Negative Feedback Voltage | | -3 | 3 | 12 | mV | l: full operating temperature range | 3 |
| Positive FBX Pin Bias Current | | 81 | 83.3 | 85 | µA | VFBX = Positive Feedback Voltage, Current Into Pin; l | 3 |
| Negative FBX Pin Bias Current | | 81 | 83.3 | 86 | µA | VFBX = Negative Feedback Voltage, Current Out of Pin; l | 3 |
| Quiescent Current | | | 1.2 | 1.7 | mA | VSHDN = 2.5V, Not Switching | 3 |
| Quiescent Current in Shutdown | | | 0 | 1 | µA | VSHDN = 0V | 3 |
| Reference Line Regulation | | | 0.01 | 0.05 | %/V | 2.55V ≤ VIN ≤ 40V | 3 |
| Switching Frequency, fOSC | fOSC | 1.23 | 1.5 | 1.77 | MHz | RT = 56.2k; l | 3 |
| Switching Frequency, fOSC | fOSC | 165 | 200 | 235 | kHz | RT = 422k; l | 3 |
| Switching Frequency Set Range | | 200 | | 1500 | kHz | SYNCing or Free Running; l | 3 |
| SYNC High Level for Synchronization | | 1.3 | | | V | l | 3 |
| SYNC Low Level for Synchronization | | | | 0.4 | V | l | 3 |
| SYNC Clock Pulse Duty Cycle | | 35 | | 65 | % | VSYNC = 0V to 2V | 3 |
| Switch Current Limit, Minimum Duty Cycle (LT8570) | | 0.6 | 0.75 | 1 | A | Minimum Duty Cycle (Note 3); l | 3 |
| Switch Current Limit, Maximum Duty Cycle (LT8570), fOSC = 1.5MHz | | 0.27 | 0.5 | 0.85 | A | Maximum Duty Cycle (Notes 3, 4), fOSC = 1.5MHz; l | 3 |
| Switch Current Limit, Maximum Duty Cycle (LT8570), fOSC = 200kHz | | 0.15 | 0.4 | 0.8 | A | Maximum Duty Cycle (Notes 3, 4), fOSC = 200kHz; l | 3 |
| Switch VCESAT | VCESAT | | | 250 | mV | ISW = 0.4A (LT8570) | 3 |
| Switch Leakage Current | | | 0.01 | 1 | µA | VSW = 5V | 3 |
| Soft-Start Charging Current | | 4 | 6 | 8 | µA | VSS = 0.5V; l | 3 |
| SHDN Minimum Input Voltage High (Active Mode, SHDN Rising) | | 1.23 | 1.31 | 1.4 | V | Active Mode, SHDN Rising; l | 3 |
| SHDN Minimum Input Voltage (Active Mode, SHDN Falling) | | 1.21 | 1.27 | 1.33 | V | Active Mode, SHDN Falling; l | 3 |
| SHDN Input Voltage Low (Shutdown Mode) | | | | 0.3 | V | Shutdown Mode; l | 3 |
| SHDN Pin Bias Current | | 9 | 12 | 15 | µA | VSHDN = 3V | 3 |
| SHDN Pin Bias Current | | | 44 | 56 | µA | VSHDN = 1.3V | 3 |
| SHDN Pin Bias Current | | | 0 | 0.1 | µA | VSHDN = 0V | 3 |
| VIN Voltage | VIN | -0.3 | | 40 | V | | 2 |
| SW Voltage | SW | -0.4 | | 65 | V | | 2 |
| RT Voltage | RT | -0.3 | | 5 | V | | 2 |
| SS Voltage | SS | -0.3 | | 2.5 | V | | 2 |
| FBX Voltage | FBX | | | 5 | V | | 2 |
| FBX Current | FBX | -1 | | | mA | | 2 |
| VC Voltage | VC | -0.3 | | 2 | V | | 2 |
| SHDN Voltage | SHDN | -0.3 | | 40 | V | | 2 |
| SYNC Voltage | SYNC | -0.3 | | 5.5 | V | | 2 |
| Operating Junction Temperature Range (LT8570H) | TJ | -40 | | 150 | °C | LT8570H, LT8570-1H (Notes 2, 5) | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Thermal Resistance, Junction to Ambient (MSOP exposed pad) | θJA | 35 | | 40 | °C/W | MS8E 8-lead plastic MSOP with exposed pad, printed as 35°C/W TO 40°C/W | 2 |
## Materials and finish
As the datasheet states them (page.json `metadata.appearance`; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | | into the system ground plane at the C3 ground terminal. The cut ground copper at D1’s cathode is essential to | 19 |
## CAD (KiCad official)
- Symbol: `LT8570HMS8E#PBF`
- Footprint: `Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm`
- 3D model: MSOP-8-EP (KiCad packages3D, STEP)
- 3D model files: `lt8570hms8e-pbf-etched.step` / `lt8570hms8e-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt8570hms8e-pbf.step` / `lt8570hms8e-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/85701fa.pdf) (34 pp, sha256 `08f5339c3c365473`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt8570hms8e-pbf-datasheet.pdf)