main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8570hms8e-pbf: viewers · Ray
lt8570hms8e-pbf-etched.glb Publish 0.1.0 · Ray
lt8570hms8e-pbf-etched.step lt8570hms8e-pbf: factory component page (tier=mfr) · Ray
lt8570hms8e-pbf-hero.glb lt8570hms8e-pbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8570hms8e-pbf-hero.overlay.json Publish 0.1.0 · Ray
lt8570hms8e-pbf.glb Publish 0.1.0 · Ray
lt8570hms8e-pbf.kicad_mod Publish 0.1.0 · Ray
lt8570hms8e-pbf.kicad_sym Publish 0.1.0 · Ray
lt8570hms8e-pbf.lbr Publish 0.1.0 · Ray
lt8570hms8e-pbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

LT8570HMS8E#PBF

Analog Devices · DC-DC Converters · MSOP-8-EP

LT8570HMS8E#PBF from Analog Devices, in a MSOP-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FBX input Positive and negative feedback pin: a resistor from FBX to VOUT sets the output voltage using RFBX=(VOUT−1.204V)/83.3µA for a noninverting converter or RFBX=(VOUT+3mV)/83.3µA for an inverting converter, and FBX is rated -1mA to 5V maximum.
2 VC passive Error amplifier output pin where the external compensation network connects, with an absolute maximum rating of -0.3V to 2V.
3 VIN power_in Input supply pin that must be locally bypassed, operating from 2.55V to 40V with an absolute maximum of -0.3V to 40V.
4 SW output Switch pin connected to the collector of the internal NPN power switch, rated -0.4V to 65V, with trace area minimized to reduce EMI.
5 SHDN input Shutdown pin with UVLO function that disables the chip when driven below 1.21V and enables it (restarting soft-start) when driven above 1.40V, rated -0.3V to 40V, and must not be left floating.
6 RT passive Timing resistor pin where a resistor to ground sets the free-running switching frequency, rated -0.3V to 5V, and must not be left floating.
7 SS passive Soft-start pin where a soft-start capacitor is connected; it is charged through a nominal 280k resistor to about 2.1V at start-up, with an absolute maximum of -0.3V to 2.5V.
8 SYNC input Synchronization input where a clock above 1.3V high and below 0.4V low synchronizes the switching frequency, with a rating of -0.3V to 5.5V, and driving it below 0.4V reverts to the internal free-running clock.
9 GND power_in Ground exposed pad that must be soldered directly to the local ground plane.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8-EP
Category Power Management
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating Voltage Range 2.9 40 V -40°C to 150°C (l), H grade 3
Positive Feedback Voltage 1.185 1.204 1.22 V l: full operating temperature range 3
Negative Feedback Voltage -3 3 12 mV l: full operating temperature range 3
Positive FBX Pin Bias Current 81 83.3 85 µA VFBX = Positive Feedback Voltage, Current Into Pin; l 3
Negative FBX Pin Bias Current 81 83.3 86 µA VFBX = Negative Feedback Voltage, Current Out of Pin; l 3
Quiescent Current 1.2 1.7 mA VSHDN = 2.5V, Not Switching 3
Quiescent Current in Shutdown 0 1 µA VSHDN = 0V 3
Reference Line Regulation 0.01 0.05 %/V 2.55V ≤ VIN ≤ 40V 3
Switching Frequency, fOSC fOSC 1.23 1.5 1.77 MHz RT = 56.2k; l 3
Switching Frequency, fOSC fOSC 165 200 235 kHz RT = 422k; l 3
Switching Frequency Set Range 200 1500 kHz SYNCing or Free Running; l 3
SYNC High Level for Synchronization 1.3 V l 3
SYNC Low Level for Synchronization 0.4 V l 3
SYNC Clock Pulse Duty Cycle 35 65 % VSYNC = 0V to 2V 3
Switch Current Limit, Minimum Duty Cycle (LT8570) 0.6 0.75 1 A Minimum Duty Cycle (Note 3); l 3
Switch Current Limit, Maximum Duty Cycle (LT8570), fOSC = 1.5MHz 0.27 0.5 0.85 A Maximum Duty Cycle (Notes 3, 4), fOSC = 1.5MHz; l 3
Switch Current Limit, Maximum Duty Cycle (LT8570), fOSC = 200kHz 0.15 0.4 0.8 A Maximum Duty Cycle (Notes 3, 4), fOSC = 200kHz; l 3
Switch VCESAT VCESAT 250 mV ISW = 0.4A (LT8570) 3
Switch Leakage Current 0.01 1 µA VSW = 5V 3
Soft-Start Charging Current 4 6 8 µA VSS = 0.5V; l 3
SHDN Minimum Input Voltage High (Active Mode, SHDN Rising) 1.23 1.31 1.4 V Active Mode, SHDN Rising; l 3
SHDN Minimum Input Voltage (Active Mode, SHDN Falling) 1.21 1.27 1.33 V Active Mode, SHDN Falling; l 3
SHDN Input Voltage Low (Shutdown Mode) 0.3 V Shutdown Mode; l 3
SHDN Pin Bias Current 9 12 15 µA VSHDN = 3V 3
SHDN Pin Bias Current 44 56 µA VSHDN = 1.3V 3
SHDN Pin Bias Current 0 0.1 µA VSHDN = 0V 3
VIN Voltage VIN -0.3 40 V 2
SW Voltage SW -0.4 65 V 2
RT Voltage RT -0.3 5 V 2
SS Voltage SS -0.3 2.5 V 2
FBX Voltage FBX 5 V 2
FBX Current FBX -1 mA 2
VC Voltage VC -0.3 2 V 2
SHDN Voltage SHDN -0.3 40 V 2
SYNC Voltage SYNC -0.3 5.5 V 2
Operating Junction Temperature Range (LT8570H) TJ -40 150 °C LT8570H, LT8570-1H (Notes 2, 5) 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance, Junction to Ambient (MSOP exposed pad) θJA 35 40 °C/W MS8E 8-lead plastic MSOP with exposed pad, printed as 35°C/W TO 40°C/W 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper into the system ground plane at the C3 ground terminal. The cut ground copper at D1’s cathode is essential to 19

CAD (KiCad official)

  • Symbol: LT8570HMS8E#PBF
  • Footprint: Package_SO:MSOP-8-1EP_3x3mm_P0.65mm_EP1.5x1.8mm
  • 3D model: MSOP-8-EP (KiCad packages3D, STEP)
  • 3D model files: lt8570hms8e-pbf-etched.step / lt8570hms8e-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8570hms8e-pbf.step / lt8570hms8e-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (34 pp, sha256 08f5339c3c365473, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF