main
Ray Publish 0.1.0 a75745e

LT8410EDC#TRPBF

Analog Devices · DC-DC Converters · DFN-8-EP(2x2)

LT8410EDC#TRPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SHDN input Shutdown pin that enables or disables the chip: drive below 0.3V to disable and above 1.45V to activate, and do not float it; its absolute maximum voltage is 16V.
2 VCC power_in Input supply pin that must be locally bypassed to GND; the input range is 2.5V to 16V and the absolute maximum is 16V.
3 GND power_in Ground pin that must be tied directly to the local ground plane.
4 SW output Collector of the internal NPN power switch; keep the metal trace area connected to this pin minimal to reduce EMI, with an absolute maximum of 42V.
5 VOUT power_out Drain of the output disconnect PMOS; place a bypass capacitor from this pin to GND, with the output limited to 40V (absolute maximum 40V).
6 CAP power_out Cathode of the internal Schottky diode; place a bypass capacitor from this pin to GND, with an absolute maximum of 40V.
7 VREF power_in Reference pin at 1.235V that can take a soft-start capacitor to GND; the capacitor is discharged for 70µs at start-up and then charged by a 10µA source, with an absolute maximum of 2.5V.
8 FBP input Positive feedback pin and error amplifier positive input, where VFBP = VOUT / 31.85; its absolute maximum is 2.5V.
9 EXPOSED PAD (GND) power_in Exposed pad on the package bottom that must be soldered to the PCB and grounded for proper shielding; the datasheet's pin description calls it floating, which conflicts with this.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Reference Voltage VREF 1.22 1.235 1.255 V l (full operating temperature range) 2
Quiescent Current Not Switching IQ 8.5 12 µA l (full operating temperature range); not switching 2
Quiescent Current in Shutdown IQ(SHDN) 0 1 µA l; VSHDN = 0V 2
Switch Current Limit ISW(LIM) 20 25 30 mA LT8410; l 2
Switch VCESAT VCESAT 150 mV LT8410, ISW = 10mA 3
Switch Leakage Current ISW(LEAK) 0 1 µA VSW = 5V 3
Schottky Forward Voltage VF 650 850 mV IDIODE = 10mA 3
Schottky Reverse Leakage IR 0 0.5 µA VCAP, VSW = 5 3
Schottky Reverse Leakage IR 0 1 µA VCAP, VSW = 40 3
PMOS Disconnect Current Limit IPMOS(LIM) 14 19 25 mA LT8410 3
PMOS Disconnect VCAP, VOUT VCAP-VOUT 50 mV IOUT = 1mA 3
VOUT Resistor Divider Ratio 31.6 31.85 32.2 l (full operating temperature range) 3
FBP Pin Bias Current IFBP 1.3 30 nA VFBP = 0.5V, current flows out of pin; l 3
SHDN Minimum Input Voltage High VSHDN(IH) 1.2 1.3 1.45 V SHDN rising; l 3
SHDN Input Voltage High Hysteresis 60 mV 3
SHDN Hysteresis Current ISHDN(HYS) 0.08 0.1 0.14 µA Note 3 3
SHDN Input Voltage Low VSHDN(IL) 0.3 V 3
SHDN Pin Bias Current ISHDN 0 1 µA VSHDN = 3V 3
SHDN Pin Bias Current ISHDN 2 3 µA VSHDN = 16V 3
Minimum Operating Voltage 2.2 2.5 V 2
Maximum Operating Voltage 16 V 2
VREF Current Limit 10 µA Note 3 2
VREF Line Regulation 0.01 %/V 2
Quiescent Current from VOUT and CAP IQ(VOUT,CAP) 3 µA VOUT = 16V 2
Minimum Switch Off Time After Start-Up tOFF(MIN) 240 nS After start-up (Note 4) 2
Minimum Switch Off Time During Start-Up tOFF(START) 600 nS During start-up (Note 4) 2
VREF Discharge Time 70 µS 2
Input Supply Voltage VCC 2.5 16 V Wide input range (features) 1
VCC Voltage VCC -0.3 16 V 2
SW Voltage VSW -0.3 42 V 2
CAP Voltage VCAP -0.3 40 V 2
VOUT Voltage VOUT -0.3 40 V 2
SHDN Voltage VSHDN -0.3 16 V 2
VREF Voltage VREF -0.3 2.5 V 2
FBP Voltage VFBP -0.3 2.5 V 2
Maximum Junction Temperature TJMAX 125 °C 2
Operating Temperature Range TOP -40 125 °C Note 2 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction-to-Ambient θJA 88 °C/W DC package 2

CAD (KiCad official)

  • Symbol: LT8410EDC#TRPBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lt8410edc-trpbf-etched.step / lt8410edc-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8410edc-trpbf.step / lt8410edc-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 49728aa30a801127, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF