3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT8410EDC#TRPBF
Analog Devices · DC-DC Converters · DFN-8-EP(2x2)
LT8410EDC#TRPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SHDN | input | Shutdown pin that enables or disables the chip: drive below 0.3V to disable and above 1.45V to activate, and do not float it; its absolute maximum voltage is 16V. |
| 2 | VCC | power_in | Input supply pin that must be locally bypassed to GND; the input range is 2.5V to 16V and the absolute maximum is 16V. |
| 3 | GND | power_in | Ground pin that must be tied directly to the local ground plane. |
| 4 | SW | output | Collector of the internal NPN power switch; keep the metal trace area connected to this pin minimal to reduce EMI, with an absolute maximum of 42V. |
| 5 | VOUT | power_out | Drain of the output disconnect PMOS; place a bypass capacitor from this pin to GND, with the output limited to 40V (absolute maximum 40V). |
| 6 | CAP | power_out | Cathode of the internal Schottky diode; place a bypass capacitor from this pin to GND, with an absolute maximum of 40V. |
| 7 | VREF | power_in | Reference pin at 1.235V that can take a soft-start capacitor to GND; the capacitor is discharged for 70µs at start-up and then charged by a 10µA source, with an absolute maximum of 2.5V. |
| 8 | FBP | input | Positive feedback pin and error amplifier positive input, where VFBP = VOUT / 31.85; its absolute maximum is 2.5V. |
| 9 | EXPOSED PAD (GND) | power_in | Exposed pad on the package bottom that must be soldered to the PCB and grounded for proper shielding; the datasheet's pin description calls it floating, which conflicts with this. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Reference Voltage | VREF | 1.22 | 1.235 | 1.255 | V | l (full operating temperature range) | 2 |
| Quiescent Current Not Switching | IQ | 8.5 | 12 | µA | l (full operating temperature range); not switching | 2 | |
| Quiescent Current in Shutdown | IQ(SHDN) | 0 | 1 | µA | l; VSHDN = 0V | 2 | |
| Switch Current Limit | ISW(LIM) | 20 | 25 | 30 | mA | LT8410; l | 2 |
| Switch VCESAT | VCESAT | 150 | mV | LT8410, ISW = 10mA | 3 | ||
| Switch Leakage Current | ISW(LEAK) | 0 | 1 | µA | VSW = 5V | 3 | |
| Schottky Forward Voltage | VF | 650 | 850 | mV | IDIODE = 10mA | 3 | |
| Schottky Reverse Leakage | IR | 0 | 0.5 | µA | VCAP, VSW = 5 | 3 | |
| Schottky Reverse Leakage | IR | 0 | 1 | µA | VCAP, VSW = 40 | 3 | |
| PMOS Disconnect Current Limit | IPMOS(LIM) | 14 | 19 | 25 | mA | LT8410 | 3 |
| PMOS Disconnect VCAP, VOUT | VCAP-VOUT | 50 | mV | IOUT = 1mA | 3 | ||
| VOUT Resistor Divider Ratio | 31.6 | 31.85 | 32.2 | l (full operating temperature range) | 3 | ||
| FBP Pin Bias Current | IFBP | 1.3 | 30 | nA | VFBP = 0.5V, current flows out of pin; l | 3 | |
| SHDN Minimum Input Voltage High | VSHDN(IH) | 1.2 | 1.3 | 1.45 | V | SHDN rising; l | 3 |
| SHDN Input Voltage High Hysteresis | 60 | mV | 3 | ||||
| SHDN Hysteresis Current | ISHDN(HYS) | 0.08 | 0.1 | 0.14 | µA | Note 3 | 3 |
| SHDN Input Voltage Low | VSHDN(IL) | 0.3 | V | 3 | |||
| SHDN Pin Bias Current | ISHDN | 0 | 1 | µA | VSHDN = 3V | 3 | |
| SHDN Pin Bias Current | ISHDN | 2 | 3 | µA | VSHDN = 16V | 3 | |
| Minimum Operating Voltage | 2.2 | 2.5 | V | 2 | |||
| Maximum Operating Voltage | 16 | V | 2 | ||||
| VREF Current Limit | 10 | µA | Note 3 | 2 | |||
| VREF Line Regulation | 0.01 | %/V | 2 | ||||
| Quiescent Current from VOUT and CAP | IQ(VOUT,CAP) | 3 | µA | VOUT = 16V | 2 | ||
| Minimum Switch Off Time After Start-Up | tOFF(MIN) | 240 | nS | After start-up (Note 4) | 2 | ||
| Minimum Switch Off Time During Start-Up | tOFF(START) | 600 | nS | During start-up (Note 4) | 2 | ||
| VREF Discharge Time | 70 | µS | 2 | ||||
| Input Supply Voltage | VCC | 2.5 | 16 | V | Wide input range (features) | 1 | |
| VCC Voltage | VCC | -0.3 | 16 | V | 2 | ||
| SW Voltage | VSW | -0.3 | 42 | V | 2 | ||
| CAP Voltage | VCAP | -0.3 | 40 | V | 2 | ||
| VOUT Voltage | VOUT | -0.3 | 40 | V | 2 | ||
| SHDN Voltage | VSHDN | -0.3 | 16 | V | 2 | ||
| VREF Voltage | VREF | -0.3 | 2.5 | V | 2 | ||
| FBP Voltage | VFBP | -0.3 | 2.5 | V | 2 | ||
| Maximum Junction Temperature | TJMAX | 125 | °C | 2 | |||
| Operating Temperature Range | TOP | -40 | 125 | °C | Note 2 | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 88 | °C/W | DC package | 2 |
CAD (KiCad official)
- Symbol:
LT8410EDC#TRPBF - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lt8410edc-trpbf-etched.step/lt8410edc-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8410edc-trpbf.step/lt8410edc-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
49728aa30a801127, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).