main
Ray
Set visibility: public
e09dfd7
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351
{
"schema_version": 1,
"type": "component",
"slug": "lt8390aeufd-trpbf",
"title": "LT8390AEUFD#TRPBF",
"brief": "Analog Devices DC-DC Controllers, QFN-28-EP(4x5). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"version": "0.1.0",
"license": "CC-BY-SA-4.0",
"tags": [
"component",
"power supply chip",
"lt8390aeufd#trpbf",
"factory-2.0.0",
"extractor-text"
],
"component": {
"mpn": "LT8390AEUFD#TRPBF",
"manufacturer": "Analog Devices",
"package": "QFN-28-EP(4x5)",
"pin_count": 29,
"category": "Power Supply Chip",
"subcategory": "DC-DC Controllers",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8390a.pdf",
"parts": {
"symbol": "lt8390aeufd-trpbf.kicad_sym",
"footprint": "lt8390aeufd-trpbf.kicad_mod",
"model_3d": "lt8390aeufd-trpbf-hero.glb",
"model_3d_plain": "lt8390aeufd-trpbf-etched.glb",
"model_3d_step": "lt8390aeufd-trpbf-etched.step",
"model_3d_step_plain": "lt8390aeufd-trpbf.step",
"lbr": "lt8390aeufd-trpbf.lbr"
},
"distributor_links": {
"lcsc": "C673792",
"digikey": "505-LT8390AEUFD#TRPBFTR-ND",
"mouser": "584-8390AEUFDTRPBF"
},
"distributor_check": {
"checked_at": "2026-10-28T15:40:11Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT8390AEUFD#TRPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-8390AEUFDTRPBF",
"status": "found",
"lifecycle": "Restricted Availability"
}
},
"pins": [
{
"number": "1",
"name": "TG1",
"type": "output",
"description": "Buck side top gate drive that swings from SW1 to BST1 to drive the buck top N-channel MOSFET."
},
{
"number": "2",
"name": "LSP",
"type": "input",
"description": "Positive terminal of the buck side inductor current sense resistor, which requires a Kelvin connection for accurate sensing."
},
{
"number": "3",
"name": "LSN",
"type": "input",
"description": "Negative terminal of the buck side inductor current sense resistor, which requires a Kelvin connection for accurate sensing."
},
{
"number": "4",
"name": "VIN",
"type": "power_in",
"description": "Input supply with a 4V to 60V operating range that must be locally bypassed to ground with a minimum 1µF ceramic capacitor."
},
{
"number": "5",
"name": "INTVCC",
"type": "power_out",
"description": "Internal 5V linear regulator output powered from VIN that must be bypassed to ground with a minimum 4.7µF ceramic capacitor."
},
{
"number": "6",
"name": "EN/UVLO",
"type": "input",
"description": "Enable and undervoltage lockout pin that must be forced below 0.3V to shut down and above 1.233V for normal operation."
},
{
"number": "7",
"name": "TEST",
"type": "input",
"description": "Factory test pin that must be directly connected to ground for the part to operate properly."
},
{
"number": "8",
"name": "LOADEN",
"type": "input",
"description": "Load switch enable input that controls the high side PMOS load switch and must be tied to VREF or INTVCC if unused."
},
{
"number": "9",
"name": "VREF",
"type": "power_out",
"description": "Voltage reference output providing an accurate 2V capable of supplying 1mA, requiring a 0.47µF bypass capacitor to ground."
},
{
"number": "10",
"name": "CTRL",
"type": "input",
"description": "Control input that sets the ISP/ISN current sense threshold, must not be left open, and must be forced below 0.3V to stop switching."
},
{
"number": "11",
"name": "ISP",
"type": "input",
"description": "Positive terminal of the ISP/ISN current sense resistor, which requires a Kelvin connection for accurate sensing."
},
{
"number": "12",
"name": "ISN",
"type": "input",
"description": "Negative terminal of the ISP/ISN current sense resistor, which requires a Kelvin connection for accurate sensing."
},
{
"number": "13",
"name": "ISMON",
"type": "output",
"description": "Buffered current sense monitor output that equals ten times V(ISP-ISN) plus a 0.25V offset."
},
{
"number": "14",
"name": "PGOOD",
"type": "output",
"description": "Open-drain power good output that is pulled low when FB is within ±10% of the regulation voltage and requires an external pull-up resistor."
},
{
"number": "15",
"name": "SS",
"type": "passive",
"description": "Soft-start timer pin that sets the ramp with an internal 12.5µA pull-up current and a single resistor to VREF selects the fault mode."
},
{
"number": "16",
"name": "FB",
"type": "input",
"description": "Voltage loop feedback input that regulates to 1.00V and triggers overvoltage protection above 1.1V."
},
{
"number": "17",
"name": "VC",
"type": "passive",
"description": "Error amplifier output used to compensate the control loop with an external RC network and disconnected from internal loads when LOADEN is low."
},
{
"number": "18",
"name": "RT",
"type": "passive",
"description": "Switching frequency setting pin where a resistor to ground sets the internal oscillator from 600kHz to 2MHz."
},
{
"number": "19",
"name": "SYNC/SPRD",
"type": "input",
"description": "Synchronization or spread spectrum pin that is grounded for internal oscillator operation, driven by a clock to synchronize, or tied to INTVCC for 25% triangle spread spectrum."
},
{
"number": "20",
"name": "LOADTG",
"type": "output",
"description": "High side PMOS load switch top gate drive that swings from the higher of (VOUT-5V) and 1.2V up to VOUT and may be left unconnected if unused."
},
{
"number": "21",
"name": "VOUT",
"type": "power_in",
"description": "Output supply with a 0V to 60V voltage range that must be locally bypassed to ground with a minimum 1µF ceramic capacitor."
},
{
"number": "22",
"name": "TG2",
"type": "output",
"description": "Boost side top gate drive that swings from SW2 to BST2 to drive the boost top N-channel MOSFET."
},
{
"number": "23",
"name": "SW2",
"type": "passive",
"description": "Boost side switch node that swings from a Schottky diode voltage drop below ground up to VOUT."
},
{
"number": "24",
"name": "BST2",
"type": "power_out",
"description": "Boost side bootstrap driver supply that swings from a diode drop below INTVCC to (VOUT + INTVCC) and requires an external bootstrap capacitor to SW2."
},
{
"number": "25",
"name": "BG2",
"type": "output",
"description": "Boost side bottom gate drive that swings from ground to INTVCC to drive the boost bottom N-channel MOSFET."
},
{
"number": "26",
"name": "BG1",
"type": "output",
"description": "Buck side bottom gate drive that swings from ground to INTVCC to drive the buck bottom N-channel MOSFET."
},
{
"number": "27",
"name": "BST1",
"type": "power_out",
"description": "Buck side bootstrap driver supply that swings from a diode drop below INTVCC to (VIN + INTVCC) and requires an external bootstrap capacitor to SW1."
},
{
"number": "28",
"name": "SW1",
"type": "passive",
"description": "Buck side switch node that swings from a Schottky diode voltage drop below ground up to VIN."
},
{
"number": "29",
"name": "GND",
"type": "power_in",
"description": "Exposed pad ground that must be soldered directly to the PCB ground plane."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The QFN pin-to-name mapping was reconstructed from a jumbled top-view figure on page 2 (the text lay",
"15/29 pins cited to the wrong page (name found elsewhere): ['3:LSN@p11', '6:EN/UVLO@p11', '8:LOADEN@p11', '16:FB@p12']"
],
"pages_sent": 32,
"cost_usd": 0.037,
"at": "2026-10-28T15:39:54"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt8390a.pdf",
"pages": 32,
"sha256": "b3c86e61a1228fd3",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 29,
"described": 29,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt8390aeufd-trpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "028686d522379f70cdcac54d7cbc05f7e8d72fe41515288068d2e2da8d27bc8d",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt8390aeufd-trpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4,
5,
1.1
],
"zmin_mm": 0,
"centre_offset_mm": 0,
"footprint_binding": "identity",
"sha256": "c9459c95626fdfe8d3b3ebe247791471db5fc43b0d88b7bd50b2ac45404edbad",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
},
"metadata": {
"specs": {
"Manufacturer": "Analog Devices",
"Package": "QFN-28-EP(4x5)",
"Category": "Power Supply Chip",
"Pins": "29"
}
},
"variants": [],
"sections": [
"hero",
"viewers",
"readme",
"breadcrumbs",
"info"
],
"discovery_triggers": [
"lt8390aeufd#trpbf"
],
"discovery_pitch": "LT8390AEUFD#TRPBF (Analog Devices) component page: datasheet pinout, KiCad symbol, footprint and 3D.",
"author": {
"name": "Ray"
},
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt8390aeufd-trpbf.kicad_sym",
"lt8390aeufd-trpbf.kicad_mod",
"lt8390aeufd-trpbf.glb",
"lt8390aeufd-trpbf.step",
"lt8390aeufd-trpbf.lbr",
"docs/hero.png",
"docs/lt8390aeufd-trpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt8390aeufd-trpbf-hero.glb",
"lt8390aeufd-trpbf-hero.overlay.json",
"lt8390aeufd-trpbf-etched.glb"
],
"visibility": {
"public": true
}
}