main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8365emse: viewers · Ray
lt8365emse-etched.glb lt8365emse: factory component page (tier=mfr) · Ray
lt8365emse-etched.step lt8365emse: factory component page (tier=mfr) · Ray
lt8365emse-hero.glb lt8365emse: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8365emse-hero.overlay.json lt8365emse: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8365emse.glb Publish 0.1.0 · Ray
lt8365emse.kicad_mod Publish 0.1.0 · Ray
lt8365emse.kicad_sym Publish 0.1.0 · Ray
lt8365emse.lbr Publish 0.1.0 · Ray
lt8365emse.step Publish 0.1.0 · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 13 pins · Ray

LT8365EMSE#PBF

Analog Devices · DC-DC Converters · MSOP-12

LT8365EMSE#PBF from Analog Devices, in a MSOP-12. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 EN/UVLO input Shutdown and undervoltage detect pin: the part stops switching below the 1.6V threshold, resumes above 1.68V with 80mV hysteresis, and VIN current drops below 1µA when the pin is below 0.2V.
3 VIN power_in Input supply pin for the 2.8V to 60V operating range, which must be locally bypassed with the input capacitor placed as close as possible to the pin.
5 INTVCC power_out Regulated 3.8V internal supply that must be bypassed with a 1µF low ESR ceramic capacitor to GND and must not be externally loaded or driven.
6 NC unconnected No internal connection; leave this pin open.
7 BIAS input Second input supply for powering INTVCC when 4.4V ≤ BIAS ≤ VIN, which reduces VIN current; tie to GND if unused.
8 VC output Error amplifier output pin to which the external compensation network is tied.
9 FBX input Voltage regulation feedback pin for positive or negative outputs, connected through a resistor divider to set the 1.6V (boost/SEPIC) or -0.8V (inverting) regulation level.
10 RT passive A resistor from this pin to the exposed pad GND programs the switching frequency over the 100kHz to 500kHz range.
11 SS passive Soft-start pin with a capacitor to GND that controls the inductor current ramp at start-up; charged at 2µA and discharged by an internal 220Ω MOSFET during shutdown or fault.
12 SYNC/MODE input Selects the operating mode (Burst, pulse-skipping, or SSFM) or synchronizes to an external clock, with GND or <0.14V selecting Burst mode.
14 SW2 output Output of the internal power switch, rated 150V and 1.5A, where the connected metal trace area should be minimized to reduce EMI.
16 SW1 output Output of the internal power switch, rated 150V and 1.5A, where the connected metal trace area should be minimized to reduce EMI.
17 PGND, GND power_in Exposed pad serving as power and signal ground that must be soldered to a continuous copper ground plane to conduct heat out of the package.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-12
Category Power Management (PMIC)
Pins 13

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Operating Voltage Range VIN 2.8 60 V 3
VIN Quiescent Current at Shutdown IQ 1 2 μA VEN/UVLO = 0.2V 3
VIN Quiescent Current at Shutdown (full operating temperature range) IQ 1 15 μA VEN/UVLO = 0.2V; l (full operating temperature range) 3
VIN Quiescent Current at Shutdown IQ 2 5 μA VEN/UVLO = 1.5V 3
VIN Quiescent Current at Shutdown (full operating temperature range) IQ 2 25 μA VEN/UVLO = 1.5V; l (full operating temperature range) 3
VIN Quiescent Current Sleep Mode (Not Switching) IQ 9 15 μA Sleep Mode (Not Switching) SYNC = 0V 3
VIN Quiescent Current Sleep Mode (Not Switching), full operating temperature range IQ 9 30 μA Sleep Mode (Not Switching) SYNC = 0V; l (full operating temperature range) 3
VIN Quiescent Current Active Mode (Not Switching) IQ 1200 1600 μA Active Mode (Not Switching) SYNC = 0V or INTVCC, BIAS = 0V 3
VIN Quiescent Current Active Mode (Not Switching), full operating temperature range IQ 1200 1850 μA Active Mode (Not Switching) SYNC = 0V or INTVCC, BIAS = 0V; l (full operating temperature range) 3
VIN Quiescent Current Active Mode (Not Switching) IQ 22 40 μA SYNC = 0V or INTVCC, BIAS = 5V 3
VIN Quiescent Current Active Mode (Not Switching), full operating temperature range IQ 22 65 μA SYNC = 0V or INTVCC, BIAS = 5V; l (full operating temperature range) 3
BIAS Threshold Rising, BIAS Can Supply INTVCC 4.4 4.65 V BIAS Threshold Rising, BIAS Can Supply INTVCC 3
BIAS Threshold Falling, BIAS Cannot Supply INTVCC 4 4.25 V BIAS Threshold Falling, BIAS Cannot Supply INTVCC 3
FBX Regulation Voltage FBX 1.568 1.6 1.636 V FBX > 0V; l 3
FBX Regulation Voltage FBX -0.822 -0.8 -0.78 V FBX < 0V; l 3
FBX Line Regulation 0.005 0.015 %/V FBX > 0V, 2.8V < VIN < 60V 3
FBX Pin Current IFBX -10 10 nA FBX = 1.6V, -0.8V; l 3
Switching Frequency (fOSC) fOSC 92 100 113 kHz RT = 432k; l 3
Switching Frequency (fOSC) fOSC 279 300 321 kHz RT = 143k; l 3
Switching Frequency (fOSC) fOSC 465 500 535 kHz RT = 84.5k; l 3
SSFM Maximum Frequency Deviation (Δf/fOSC) 14 20 28 % (∆f/fOSC) • 100, RT = 143k 3
Minimum On-Time Burst Mode 110 200 ns Burst Mode, VIN = 24V (Note 6) 3
Minimum On-Time Pulse-Skipping Mode 110 200 ns Pulse-Skipping Mode, VIN = 24V (Note 6) 3
Minimum Off-Time 100 115 ns l 3
SYNC/Mode Threshold High (Rising) 1.3 1.7 V High (Rising), VIN = 24V; l 3
SYNC/Mode Threshold Low (Falling) 0.14 0.2 V Low (Falling), VIN = 24V; l 3
SYNC/Clock Threshold Rising 0.4 0.8 V Rising, VIN = 24V; l 3
SYNC/Clock Threshold Falling 1.3 1.7 V Falling, VIN = 24V; l 3
fSYNC/fOSC Allowed Ratio fSYNC/fOSC 0.95 1 1.25 kHz/kHz RT = 84.5k 3
SYNC Pin Current ISYNC 10 25 µA SYNC = 2V 3
Maximum Switch Current Limit Threshold 1.5 2 2.7 A l 3
Switch Leakage Current ISW 0.1 1 µA VSW = 150V 3
EN/UVLO Pin Threshold (Rising) VEN/UVLO 1.576 1.68 1.9 V Start Switching; l 4
EN/UVLO Pin Threshold (Falling) VEN/UVLO 1.545 1.6 1.645 V Stop Switching; l 4
EN/UVLO Pin Current IEN/UVLO -50 50 nA VEN/UVLO = 1.6V; l 4
Absolute Maximum SW Pin Voltage SW 150 V 2
Absolute Maximum VIN, EN/UVLO Pin Voltage VIN, EN/UVLO 60 V 2
Absolute Maximum BIAS Pin Voltage BIAS 60 V 2
Absolute Maximum EN/UVLO Pin Above VIN Pin, SYNC EN/UVLO, SYNC 6 V EN/UVLO Pin Above VIN Pin, SYNC 2
Absolute Maximum VC Pin Voltage VC 4 V 2
Absolute Maximum FBX Pin Voltage FBX -4 4 V ±4V 2
Operating Junction Temperature LT8365E TJ -40 125 °C LT8365E (Note 3) 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction-to-Ambient θJA 45 °C/W MSE package 2
Thermal Resistance Junction-to-Case θJC 10 °C/W MSE package 2

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper close as possible to the VIN pin, and the negative terminal as close as possible to the exposed pad PGND copper 7

CAD (KiCad official)

  • Symbol: LT8365EMSE#PBF
  • Footprint: Package_SO:Analog_MSOP-12-16-1EP_3x4.039mm_P0.5mm_EP1.651x2.845mm
  • 3D model: MSOP-12 (KiCad packages3D, STEP)
  • 3D model files: lt8365emse-etched.step / lt8365emse-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8365emse.step / lt8365emse.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (30 pp, sha256 c511973eed4b53a9, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF