main
Ray
Publish 0.1.0
a60c5cb
LT8330IS6#TRPBF
Analog Devices · DC-DC Converters · TSOT-23-6
LT8330IS6#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Output of the internal power switch (rated 60V max); minimize the metal trace area connected to this pin to reduce EMI. |
| 2 | GND | power_in | Ground connection for the LT8330; should be connected to a ground plane tied to large copper layers to spread dissipated heat. |
| 3 | FBX | input | Voltage regulation feedback pin for positive (1.6V) or negative (-0.8V) outputs, connected to a resistor divider between the output and GND; reduces switching frequency during start-up and faults when close to GND. |
| 4 | EN/UVLO | input | Shutdown and undervoltage detect pin with accurate 1.6V falling threshold and 80mV hysteresis (1.68V rising); below 0.2V it reduces VIN current below 1µA, and it can be tied to VIN if not needed (40V max). |
| 5 | INTVCC | power_out | Regulated 3V supply for internal loads; must be bypassed with a minimum 1µF low ESR ceramic capacitor to ground, with no additional components or loading allowed and no external drive. |
| 6 | VIN | power_in | Input supply (3V to 40V operating range) that must be locally bypassed with the input capacitor placed as close as possible to the VIN pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operating Voltage Range | VIN | 3 | 40 | V | full operating temperature range | 3 | |
| VIN Quiescent Current at Shutdown | IQ | 0.9 | 2 | µA | VEN/UVLO = 0.2V | 3 | |
| VIN Quiescent Current at Shutdown (full temp) | IQ | 2 | 5 | µA | VEN/UVLO = 0.2V, full temperature range | 3 | |
| VIN Quiescent Current at Shutdown | IQ | 2 | 5 | µA | VEN/UVLO = 1.5V | 3 | |
| VIN Quiescent Current at Shutdown (full temp) | IQ | 3.6 | 9.5 | µA | VEN/UVLO = 1.5V, full temperature range | 3 | |
| VIN Quiescent Current Sleep Mode | IQ | 5.5 | 10 | µA | Sleep Mode, Not Switching | 3 | |
| VIN Quiescent Current Sleep Mode (full temp) | IQ | 8.5 | 15 | µA | Sleep Mode, Not Switching, full temperature range | 3 | |
| VIN Quiescent Current Active Mode | IQ | 780 | 1100 | µA | Active Mode, Not Switching | 3 | |
| VIN Quiescent Current Active Mode (full temp) | IQ | 840 | 1200 | µA | Active Mode, Not Switching, full temperature range | 3 | |
| FBX Regulation Voltage (positive) | VFBX | 1.568 | 1.6 | 1.632 | V | FBX > 0V | 3 |
| FBX Regulation Voltage (negative) | VFBX | -0.82 | -0.8 | -0.78 | V | FBX < 0V | 3 |
| FBX Line Regulation (positive) | 0.005 | 0.015 | %/V | FBX > 0V, 3V < VIN < 40V | 3 | ||
| FBX Line Regulation (negative) | 0.005 | 0.015 | %/V | FBX < 0V, 3V < VIN < 40V | 3 | ||
| FBX Pin Current | IFBX | -10 | 10 | nA | FBX = 1.6V, -0.8V | 3 | |
| Switching Frequency | fOSC | 1.85 | 2 | 2.15 | MHz | VIN = 24V | 3 |
| Minimum On-Time | 65 | 105 | ns | VIN = 24V | 3 | ||
| Minimum Off-Time | 47 | 65 | ns | VIN = 24V | 3 | ||
| Maximum Switch Current Limit Threshold | 1 | 1.2 | 1.4 | A | 3 | ||
| Switch RDS(ON) | RDS(ON) | 330 | mΩ | ISW = 0.5A | 3 | ||
| Switch Leakage Current | 0.1 | 1 | µA | VSW = 60V | 3 | ||
| EN/UVLO Pin Threshold (Rising) | 1.62 | 1.68 | 1.745 | V | Start Switching | 3 | |
| EN/UVLO Pin Threshold (Falling) | 1.556 | 1.6 | 1.644 | V | Stop Switching | 3 | |
| EN/UVLO Pin Current | -40 | 100 | nA | VEN/UVLO = 1.6V | 3 | ||
| Soft-Start Time | 1 | ms | VIN = 24V | 3 | |||
| SW Voltage | SW | 60 | V | 2 | |||
| VIN, EN/UVLO Voltage | VIN | 40 | V | 2 | |||
| EN/UVLO Pin Above VIN Pin | 6 | V | 2 | ||||
| INTVCC Voltage | INTVCC | 4 | V | 2 | |||
| FBX Voltage | FBX | -4 | 4 | V | 2 | ||
| Operating Junction Temperature (LT8330I) | TJ | -40 | 125 | °C | LT8330I | 2 | |
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Thermal Resistance Junction-to-Ambient | θJA | 125 | °C/W | S6 package, 6-lead TSOT-23 | 2 | ||
| Thermal Resistance Junction-to-Case | θJC | 102 | °C/W | S6 package, 6-lead TSOT-23 | 2 |
CAD (KiCad official)
- Symbol:
LT8330IS6#TRPBF - Footprint:
Package_TO_SOT_SMD:TSOT-23-6 - 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
lt8330is6-trpbf-etched.step/lt8330is6-trpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt8330is6-trpbf.step/lt8330is6-trpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b6e8aa0dbd6aa886, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT8330IS6#TRPBF
**Analog Devices** · DC-DC Converters · TSOT-23-6
LT8330IS6#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Output of the internal power switch (rated 60V max); minimize the metal trace area connected to this pin to reduce EMI. |
| 2 | GND | power_in | Ground connection for the LT8330; should be connected to a ground plane tied to large copper layers to spread dissipated heat. |
| 3 | FBX | input | Voltage regulation feedback pin for positive (1.6V) or negative (-0.8V) outputs, connected to a resistor divider between the output and GND; reduces switching frequency during start-up and faults when close to GND. |
| 4 | EN/UVLO | input | Shutdown and undervoltage detect pin with accurate 1.6V falling threshold and 80mV hysteresis (1.68V rising); below 0.2V it reduces VIN current below 1µA, and it can be tied to VIN if not needed (40V max). |
| 5 | INTVCC | power_out | Regulated 3V supply for internal loads; must be bypassed with a minimum 1µF low ESR ceramic capacitor to ground, with no additional components or loading allowed and no external drive. |
| 6 | VIN | power_in | Input supply (3V to 40V operating range) that must be locally bypassed with the input capacitor placed as close as possible to the VIN pin. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | TSOT-23-6 |
| Category | Power Supply Chip |
| Pins | 6 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VIN Operating Voltage Range | VIN | 3 | | 40 | V | full operating temperature range | 3 |
| VIN Quiescent Current at Shutdown | IQ | | 0.9 | 2 | µA | VEN/UVLO = 0.2V | 3 |
| VIN Quiescent Current at Shutdown (full temp) | IQ | | 2 | 5 | µA | VEN/UVLO = 0.2V, full temperature range | 3 |
| VIN Quiescent Current at Shutdown | IQ | | 2 | 5 | µA | VEN/UVLO = 1.5V | 3 |
| VIN Quiescent Current at Shutdown (full temp) | IQ | | 3.6 | 9.5 | µA | VEN/UVLO = 1.5V, full temperature range | 3 |
| VIN Quiescent Current Sleep Mode | IQ | | 5.5 | 10 | µA | Sleep Mode, Not Switching | 3 |
| VIN Quiescent Current Sleep Mode (full temp) | IQ | | 8.5 | 15 | µA | Sleep Mode, Not Switching, full temperature range | 3 |
| VIN Quiescent Current Active Mode | IQ | | 780 | 1100 | µA | Active Mode, Not Switching | 3 |
| VIN Quiescent Current Active Mode (full temp) | IQ | | 840 | 1200 | µA | Active Mode, Not Switching, full temperature range | 3 |
| FBX Regulation Voltage (positive) | VFBX | 1.568 | 1.6 | 1.632 | V | FBX > 0V | 3 |
| FBX Regulation Voltage (negative) | VFBX | -0.82 | -0.8 | -0.78 | V | FBX < 0V | 3 |
| FBX Line Regulation (positive) | | | 0.005 | 0.015 | %/V | FBX > 0V, 3V < VIN < 40V | 3 |
| FBX Line Regulation (negative) | | | 0.005 | 0.015 | %/V | FBX < 0V, 3V < VIN < 40V | 3 |
| FBX Pin Current | IFBX | -10 | | 10 | nA | FBX = 1.6V, -0.8V | 3 |
| Switching Frequency | fOSC | 1.85 | 2 | 2.15 | MHz | VIN = 24V | 3 |
| Minimum On-Time | | | 65 | 105 | ns | VIN = 24V | 3 |
| Minimum Off-Time | | | 47 | 65 | ns | VIN = 24V | 3 |
| Maximum Switch Current Limit Threshold | | 1 | 1.2 | 1.4 | A | | 3 |
| Switch RDS(ON) | RDS(ON) | | 330 | | mΩ | ISW = 0.5A | 3 |
| Switch Leakage Current | | | 0.1 | 1 | µA | VSW = 60V | 3 |
| EN/UVLO Pin Threshold (Rising) | | 1.62 | 1.68 | 1.745 | V | Start Switching | 3 |
| EN/UVLO Pin Threshold (Falling) | | 1.556 | 1.6 | 1.644 | V | Stop Switching | 3 |
| EN/UVLO Pin Current | | -40 | | 100 | nA | VEN/UVLO = 1.6V | 3 |
| Soft-Start Time | | | 1 | | ms | VIN = 24V | 3 |
| SW Voltage | SW | | | 60 | V | | 2 |
| VIN, EN/UVLO Voltage | VIN | | | 40 | V | | 2 |
| EN/UVLO Pin Above VIN Pin | | | | 6 | V | | 2 |
| INTVCC Voltage | INTVCC | | | 4 | V | | 2 |
| FBX Voltage | FBX | -4 | | 4 | V | | 2 |
| Operating Junction Temperature (LT8330I) | TJ | -40 | | 125 | °C | LT8330I | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Thermal Resistance Junction-to-Ambient | θJA | | 125 | | °C/W | S6 package, 6-lead TSOT-23 | 2 |
| Thermal Resistance Junction-to-Case | θJC | | 102 | | °C/W | S6 package, 6-lead TSOT-23 | 2 |
## CAD (KiCad official)
- Symbol: `LT8330IS6#TRPBF`
- Footprint: `Package_TO_SOT_SMD:TSOT-23-6`
- 3D model: TSOT-23-6 (KiCad packages3D, STEP)
- 3D model files: `lt8330is6-trpbf-etched.step` / `lt8330is6-trpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt8330is6-trpbf.step` / `lt8330is6-trpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/LT8330.pdf) (24 pp, sha256 `b6e8aa0dbd6aa886`, retrieved 2026-10-31, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-sonnet-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt8330is6-trpbf-datasheet.pdf)