main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt8330is6-trpbf: viewers · Ray
lt8330is6-trpbf-etched.glb Publish 0.1.0 · Ray
lt8330is6-trpbf-etched.step lt8330is6-trpbf: factory component page (tier=mfr) · Ray
lt8330is6-trpbf-hero.glb lt8330is6-trpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt8330is6-trpbf-hero.overlay.json Publish 0.1.0 · Ray
lt8330is6-trpbf.glb Publish 0.1.0 · Ray
lt8330is6-trpbf.kicad_mod Publish 0.1.0 · Ray
lt8330is6-trpbf.kicad_sym Publish 0.1.0 · Ray
lt8330is6-trpbf.lbr Publish 0.1.0 · Ray
lt8330is6-trpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 6 pins · Ray

LT8330IS6#TRPBF

Analog Devices · DC-DC Converters · TSOT-23-6

LT8330IS6#TRPBF from Analog Devices, in a TSOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW passive Output of the internal power switch (rated 60V max); minimize the metal trace area connected to this pin to reduce EMI.
2 GND power_in Ground connection for the LT8330; should be connected to a ground plane tied to large copper layers to spread dissipated heat.
3 FBX input Voltage regulation feedback pin for positive (1.6V) or negative (-0.8V) outputs, connected to a resistor divider between the output and GND; reduces switching frequency during start-up and faults when close to GND.
4 EN/UVLO input Shutdown and undervoltage detect pin with accurate 1.6V falling threshold and 80mV hysteresis (1.68V rising); below 0.2V it reduces VIN current below 1µA, and it can be tied to VIN if not needed (40V max).
5 INTVCC power_out Regulated 3V supply for internal loads; must be bypassed with a minimum 1µF low ESR ceramic capacitor to ground, with no additional components or loading allowed and no external drive.
6 VIN power_in Input supply (3V to 40V operating range) that must be locally bypassed with the input capacitor placed as close as possible to the VIN pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package TSOT-23-6
Category Power Supply Chip
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VIN Operating Voltage Range VIN 3 40 V full operating temperature range 3
VIN Quiescent Current at Shutdown IQ 0.9 2 µA VEN/UVLO = 0.2V 3
VIN Quiescent Current at Shutdown (full temp) IQ 2 5 µA VEN/UVLO = 0.2V, full temperature range 3
VIN Quiescent Current at Shutdown IQ 2 5 µA VEN/UVLO = 1.5V 3
VIN Quiescent Current at Shutdown (full temp) IQ 3.6 9.5 µA VEN/UVLO = 1.5V, full temperature range 3
VIN Quiescent Current Sleep Mode IQ 5.5 10 µA Sleep Mode, Not Switching 3
VIN Quiescent Current Sleep Mode (full temp) IQ 8.5 15 µA Sleep Mode, Not Switching, full temperature range 3
VIN Quiescent Current Active Mode IQ 780 1100 µA Active Mode, Not Switching 3
VIN Quiescent Current Active Mode (full temp) IQ 840 1200 µA Active Mode, Not Switching, full temperature range 3
FBX Regulation Voltage (positive) VFBX 1.568 1.6 1.632 V FBX > 0V 3
FBX Regulation Voltage (negative) VFBX -0.82 -0.8 -0.78 V FBX < 0V 3
FBX Line Regulation (positive) 0.005 0.015 %/V FBX > 0V, 3V < VIN < 40V 3
FBX Line Regulation (negative) 0.005 0.015 %/V FBX < 0V, 3V < VIN < 40V 3
FBX Pin Current IFBX -10 10 nA FBX = 1.6V, -0.8V 3
Switching Frequency fOSC 1.85 2 2.15 MHz VIN = 24V 3
Minimum On-Time 65 105 ns VIN = 24V 3
Minimum Off-Time 47 65 ns VIN = 24V 3
Maximum Switch Current Limit Threshold 1 1.2 1.4 A 3
Switch RDS(ON) RDS(ON) 330 mΩ ISW = 0.5A 3
Switch Leakage Current 0.1 1 µA VSW = 60V 3
EN/UVLO Pin Threshold (Rising) 1.62 1.68 1.745 V Start Switching 3
EN/UVLO Pin Threshold (Falling) 1.556 1.6 1.644 V Stop Switching 3
EN/UVLO Pin Current -40 100 nA VEN/UVLO = 1.6V 3
Soft-Start Time 1 ms VIN = 24V 3
SW Voltage SW 60 V 2
VIN, EN/UVLO Voltage VIN 40 V 2
EN/UVLO Pin Above VIN Pin 6 V 2
INTVCC Voltage INTVCC 4 V 2
FBX Voltage FBX -4 4 V 2
Operating Junction Temperature (LT8330I) TJ -40 125 °C LT8330I 2
Storage Temperature Range TSTG -65 150 °C 2
Thermal Resistance Junction-to-Ambient θJA 125 °C/W S6 package, 6-lead TSOT-23 2
Thermal Resistance Junction-to-Case θJC 102 °C/W S6 package, 6-lead TSOT-23 2

CAD (KiCad official)

  • Symbol: LT8330IS6#TRPBF
  • Footprint: Package_TO_SOT_SMD:TSOT-23-6
  • 3D model: TSOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: lt8330is6-trpbf-etched.step / lt8330is6-trpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt8330is6-trpbf.step / lt8330is6-trpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 b6e8aa0dbd6aa886, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF