main
Ray Publish 0.1.0 1b99108

LT6657BHMS8-1.25#PBF

Analog Devices · Voltage References · MSOP-8

LT6657BHMS8-1.25#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DNC unconnected Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum.
2 VIN power_in Input voltage supply that must be bypassed to GND with a local 0.1µF (1µF for 1.25V) or larger capacitor.
3 SHDN input Active-low shutdown input that disables the part to reduce supply current below 2µA, must be driven externally, and should be tied to VIN if unused.
4 GND power_in Device ground that must connect to a noise-free ground plane, since it carries supply return current.
5 DNC unconnected Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum.
6 VOUT power_out Reference output that can source and sink current to a load and requires an output capacitor of 1µF (2.7µF for 1.25V) or higher for stability.
7 DNC unconnected Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum.
8 DNC unconnected Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package MSOP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Output Voltage Accuracy -0.1 0 0.1 % 3
Output Voltage Temperature Coefficient (B grade) 1 3 ppm/°C LT6657B; full temperature range (l) 3
Line Regulation 4 ppm/V VOUT + 0.5V ≤ VIN ≤ 40V; LT6657B 3
Load Regulation (Source) 10 µV/mA IOUT (Source) = 10mA; LT6657B 3
Load Regulation (Sink) 15 µV/mA IOUT (Sink) = 10mA; LT6657B 3
Minimum VIN, VOUT VIN, VOUT 120 250 mV LT6657-1.25V; ΔVOUT = 0.1%, IOUT = 0mA 3
Minimum VIN, VOUT (source) VIN, VOUT 120 250 mV LT6657-1.25V; ΔVOUT = 0.1%, IOUT (Source) = 1mA 3
Minimum VIN, VOUT (source) VIN, VOUT 330 500 mV LT6657-1.25V; ΔVOUT = 0.1%, IOUT (Source) = 10mA 3
Minimum VIN, VOUT (sink) VIN, VOUT 120 250 mV LT6657-1.25V; ΔVOUT = 0.1%, IOUT (Sink) = 10mA 3
Logic High Input Voltage (1.25V) 1.45 V LT6657-1.25V; SHDN pin 4
Logic High Input Current (1.25V) 0.5 2 µV LT6657-1.25V; SHDN = 1.45V 4
Logic Low Input Voltage (1.25V) 0.05 0.8 V LT6657-1.25V; SHDN pin 4
Logic Low Input Current (1.25V) 1 µV LT6657-1.25V; SHDN = 0.8V 4
Supply Current in Shutdown 0.01 4 µA SHDN = 0.4V 4
Supply Current in Shutdown 2 20 µA SHDN = 0.8V 4
Supply Current No Load 1.2 2.3 mA No load 4
Output Short-Circuit Current 15 mA Short VOUT to GND 4
Output Short-Circuit Current 16 mA Short VOUT to VIN 4
Output Voltage Noise (0.1Hz to 10Hz) 0.5 ppmP-P 0.1Hz ≤ f ≤ 10Hz 4
Output Voltage Noise (10Hz to 1kHz) 0.8 ppmRMS 10Hz ≤ f ≤ 1kHz 4
Turn-On Time 180 µsec 0.1% Settling, COUT = 1µF 4
Long-Term Drift of Output Voltage 30 ppm/√kHr 4
Hysteresis 20 ppm ΔT = 0°C to 50°C 4
Hysteresis 24 ppm ΔT = 0°C to 70°C 4
Hysteresis 30 ppm ΔT = -40°C to 85°C 4
Hysteresis 35 ppm ΔT = -40°C to 125°C 4
Hysteresis 40 ppm ΔT = -55°C to 125°C 4
Input Voltage VIN (to GND) VIN -40 40 V to GND 2
Shutdown Voltage SHDN SHDN -20 40 V 2
Output Voltage VOUT VOUT -3 30 V 2
Input-to-Output Differential Voltage -40 40 V Note 2 2
Operating Junction Temperature Range -40 150 °C 2
Storage Temperature Range -65 150 °C 2
Maximum Junction Temperature TJMAX 150 °C 2
Thermal Resistance Junction to Ambient θJA 273 °C/W MS8 MSOP-8 package 2
Supply Voltage VIN (1.25V option minimum) VIN 1.5 V LT6657-1.25 minimum supply 1
Supply Voltage VIN (maximum) VIN 40 V (VOUT + 50mV) < VIN < 40V 1
Specified Operating Temperature Range TA -40 125 °C 2

CAD (KiCad official)

  • Symbol: LT6657BHMS8-1.25#PBF
  • Footprint: Package_SO:MSOP-8_3x3mm_P0.65mm
  • 3D model: MSOP-8 (KiCad packages3D, STEP)
  • 3D model files: lt6657bhms8-1-25-pbf-etched.step / lt6657bhms8-1-25-pbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6657bhms8-1-25-pbf.step / lt6657bhms8-1-25-pbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (24 pp, sha256 b937136e51511f97, retrieved 2026-10-28, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF