Generated by kicad-footprint-generator · KiCad file format 20260206
LT6657BHMS8-1.25#PBF
Analog Devices · Voltage References · MSOP-8
LT6657BHMS8-1.25#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DNC | unconnected | Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum. |
| 2 | VIN | power_in | Input voltage supply that must be bypassed to GND with a local 0.1µF (1µF for 1.25V) or larger capacitor. |
| 3 | SHDN | input | Active-low shutdown input that disables the part to reduce supply current below 2µA, must be driven externally, and should be tied to VIN if unused. |
| 4 | GND | power_in | Device ground that must connect to a noise-free ground plane, since it carries supply return current. |
| 5 | DNC | unconnected | Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum. |
| 6 | VOUT | power_out | Reference output that can source and sink current to a load and requires an output capacitor of 1µF (2.7µF for 1.25V) or higher for stability. |
| 7 | DNC | unconnected | Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum. |
| 8 | DNC | unconnected | Internal function pin that must be left floating; do not connect or electrically stress it, and keep leakage from it to a minimum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Output Voltage Accuracy | -0.1 | 0 | 0.1 | % | 3 | ||
| Output Voltage Temperature Coefficient (B grade) | 1 | 3 | ppm/°C | LT6657B; full temperature range (l) | 3 | ||
| Line Regulation | 4 | ppm/V | VOUT + 0.5V ≤ VIN ≤ 40V; LT6657B | 3 | |||
| Load Regulation (Source) | 10 | µV/mA | IOUT (Source) = 10mA; LT6657B | 3 | |||
| Load Regulation (Sink) | 15 | µV/mA | IOUT (Sink) = 10mA; LT6657B | 3 | |||
| Minimum VIN, VOUT | VIN, VOUT | 120 | 250 | mV | LT6657-1.25V; ΔVOUT = 0.1%, IOUT = 0mA | 3 | |
| Minimum VIN, VOUT (source) | VIN, VOUT | 120 | 250 | mV | LT6657-1.25V; ΔVOUT = 0.1%, IOUT (Source) = 1mA | 3 | |
| Minimum VIN, VOUT (source) | VIN, VOUT | 330 | 500 | mV | LT6657-1.25V; ΔVOUT = 0.1%, IOUT (Source) = 10mA | 3 | |
| Minimum VIN, VOUT (sink) | VIN, VOUT | 120 | 250 | mV | LT6657-1.25V; ΔVOUT = 0.1%, IOUT (Sink) = 10mA | 3 | |
| Logic High Input Voltage (1.25V) | 1.45 | V | LT6657-1.25V; SHDN pin | 4 | |||
| Logic High Input Current (1.25V) | 0.5 | 2 | µV | LT6657-1.25V; SHDN = 1.45V | 4 | ||
| Logic Low Input Voltage (1.25V) | 0.05 | 0.8 | V | LT6657-1.25V; SHDN pin | 4 | ||
| Logic Low Input Current (1.25V) | 1 | µV | LT6657-1.25V; SHDN = 0.8V | 4 | |||
| Supply Current in Shutdown | 0.01 | 4 | µA | SHDN = 0.4V | 4 | ||
| Supply Current in Shutdown | 2 | 20 | µA | SHDN = 0.8V | 4 | ||
| Supply Current No Load | 1.2 | 2.3 | mA | No load | 4 | ||
| Output Short-Circuit Current | 15 | mA | Short VOUT to GND | 4 | |||
| Output Short-Circuit Current | 16 | mA | Short VOUT to VIN | 4 | |||
| Output Voltage Noise (0.1Hz to 10Hz) | 0.5 | ppmP-P | 0.1Hz ≤ f ≤ 10Hz | 4 | |||
| Output Voltage Noise (10Hz to 1kHz) | 0.8 | ppmRMS | 10Hz ≤ f ≤ 1kHz | 4 | |||
| Turn-On Time | 180 | µsec | 0.1% Settling, COUT = 1µF | 4 | |||
| Long-Term Drift of Output Voltage | 30 | ppm/√kHr | 4 | ||||
| Hysteresis | 20 | ppm | ΔT = 0°C to 50°C | 4 | |||
| Hysteresis | 24 | ppm | ΔT = 0°C to 70°C | 4 | |||
| Hysteresis | 30 | ppm | ΔT = -40°C to 85°C | 4 | |||
| Hysteresis | 35 | ppm | ΔT = -40°C to 125°C | 4 | |||
| Hysteresis | 40 | ppm | ΔT = -55°C to 125°C | 4 | |||
| Input Voltage VIN (to GND) | VIN | -40 | 40 | V | to GND | 2 | |
| Shutdown Voltage SHDN | SHDN | -20 | 40 | V | 2 | ||
| Output Voltage VOUT | VOUT | -3 | 30 | V | 2 | ||
| Input-to-Output Differential Voltage | -40 | 40 | V | Note 2 | 2 | ||
| Operating Junction Temperature Range | -40 | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Thermal Resistance Junction to Ambient | θJA | 273 | °C/W | MS8 MSOP-8 package | 2 | ||
| Supply Voltage VIN (1.25V option minimum) | VIN | 1.5 | V | LT6657-1.25 minimum supply | 1 | ||
| Supply Voltage VIN (maximum) | VIN | 40 | V | (VOUT + 50mV) < VIN < 40V | 1 | ||
| Specified Operating Temperature Range | TA | -40 | 125 | °C | 2 |
CAD (KiCad official)
- Symbol:
LT6657BHMS8-1.25#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6657bhms8-1-25-pbf-etched.step/lt6657bhms8-1-25-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6657bhms8-1-25-pbf.step/lt6657bhms8-1-25-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (24 pp, sha256
b937136e51511f97, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).