component
LT6600CS8-10#PBF
Public Made by Adomby adom
Analog Devices Pre-ordered Chips, SO-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
main
LT6600CS8-10#PBF
Analog Devices · Pre-ordered Chips · SO-8
LT6600CS8-10#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Inverting filter input, driven through an external resistor RIN, with DC differential gain of 402Ω/RIN (page 8) and input current limited to under 10mA if the differential input exceeds 1.4V. |
| 2 | VOCM | input | High-impedance DC common-mode reference for the 2nd filter stage that sets the output common-mode voltage; it can be tied to VMID or an external reference and should be bypassed with 0.01µF unless connected to a ground plane. |
| 3 | V+ | power_in | Positive supply pin, needing a quality 0.1µF ceramic bypass capacitor to V- placed as close to the IC as possible, with a total supply voltage of at most 11V. |
| 4 | OUT+ | output | Non-inverting differential filter output that can drive a 100Ω and/or 50pF load to AC ground. |
| 5 | OUT- | output | Inverting differential filter output that can drive a 100Ω and/or 50pF load to AC ground. |
| 6 | V- | power_in | Negative supply pin (ground for single-supply operation) that is fused to the lead frame for thermal conduction, with a 0.1µF ceramic bypass to V+ (or to ground in dual-supply use). |
| 7 | VMID | bidirectional | Internally mid-supply-biased pin with about 5.5kΩ impedance that sets the output common mode of the 1st filter stage; bypass it with 0.01µF to V- and, if overridden, keep it at least 1.5V from either supply rail. |
| 8 | IN+ | input | Non-inverting filter input, driven through an external resistor RIN, with DC differential gain of 402Ω/RIN (page 8) and input current limited to under 10mA if the differential input exceeds 1.4V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Interface ICs |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Filter Gain, VS = 3V | -0.4 | 0 | 0.5 | dB | VS = 3V, VIN = 2VP-P, fIN = DC to 260kHz | 3 | |
| Filter Gain 1MHz rel 260kHz, VS = 3V | -0.1 | 0 | 0.1 | dB | VS = 3V, VIN = 2VP-P, fIN = 1MHz (gain relative to 260kHz) | 3 | |
| Filter Gain 5MHz rel 260kHz, VS = 3V | -0.4 | -0.1 | 0.3 | dB | VS = 3V, VIN = 2VP-P, fIN = 5MHz (gain relative to 260kHz) | 3 | |
| Filter Gain 8MHz rel 260kHz, VS = 3V | -0.3 | 0.1 | 1 | dB | VS = 3V, VIN = 2VP-P, fIN = 8MHz (gain relative to 260kHz) | 3 | |
| Filter Gain 10MHz rel 260kHz, VS = 3V | -0.2 | 0.3 | 1.7 | dB | VS = 3V, VIN = 2VP-P, fIN = 10MHz (gain relative to 260kHz) | 3 | |
| Filter Gain 30MHz rel 260kHz, VS = 3V | -28 | -25 | dB | VS = 3V, VIN = 2VP-P, fIN = 30MHz (gain relative to 260kHz) | 3 | ||
| Filter Gain 50MHz rel 260kHz, VS = 3V | -44 | dB | VS = 3V, VIN = 2VP-P, fIN = 50MHz (gain relative to 260kHz) | 3 | |||
| Filter Gain, VS = 5V | -0.5 | 0 | 0.5 | dB | VS = 5V, VIN = 2VP-P, fIN = DC to 260kHz | 3 | |
| Filter Gain 1MHz rel 260kHz, VS = 5V | -0.1 | 0 | 0.1 | dB | VS = 5V, VIN = 2VP-P, fIN = 1MHz (gain relative to 260kHz) | 4 | |
| Filter Gain 5MHz rel 260kHz, VS = 5V | -0.4 | -0.1 | 0.3 | dB | VS = 5V, VIN = 2VP-P, fIN = 5MHz (gain relative to 260kHz) | 3 | |
| Filter Gain 8MHz rel 260kHz, VS = 5V | -0.4 | 0.1 | 0.9 | dB | VS = 5V, VIN = 2VP-P, fIN = 8MHz (gain relative to 260kHz) | 3 | |
| Filter Gain 10MHz rel 260kHz, VS = 5V | -0.3 | 0.2 | 1.4 | dB | VS = 5V, VIN = 2VP-P, fIN = 10MHz (gain relative to 260kHz) | 3 | |
| Filter Gain, VS = ±5V | -0.6 | -0.1 | 0.4 | dB | VS = ±5V, VIN = 2VP-P, fIN = DC to 260kHz | 3 | |
| Filter Gain, RIN = 100Ω | 11.4 | 12 | 12.6 | dB | RIN = 100Ω, VS = 3V, 5V, ±5V, VIN = 0.5VP-P, fIN = DC to 260kHz | 3 | |
| Differential Output Swing VS = 5V | 3.85 | 5 | VP-P DIFF | Measured between pins 4 and 5, VS = 5V | 3 | ||
| Differential Output Swing, pin 7 shorted to pin 2, VS = 3V | 3.85 | 4.9 | VP-P DIFF | Measured between pins 4 and 5, pin 7 shorted to pin 2, VS = 3V | 3 | ||
| Input Bias Current | -85 | -40 | μA | Average of pin 1 and pin 8 | 3 | ||
| Input Referred Differential Offset, RIN = 402Ω, VS = 3V | 5 | 10 | mV | RIN = 402Ω, VS = 3V | 3 | ||
| Input Referred Differential Offset, RIN = 402Ω, VS = 5V | 8 | 20 | mV | RIN = 402Ω, VS = 5V | 3 | ||
| Input Referred Differential Offset, RIN = 402Ω, VS = ±5V | 30 | 35 | mV | RIN = 402Ω, VS = ±5V | 3 | ||
| Input Referred Differential Offset, RIN = 100Ω, VS = 3V | 5 | 13 | mV | RIN = 100Ω, VS = 3V | 3 | ||
| Input Referred Differential Offset, RIN = 100Ω, VS = 5V | 5 | 22 | mV | RIN = 100Ω, VS = 5V | 3 | ||
| Input Referred Differential Offset, RIN = 100Ω, VS = ±5V | 5 | 30 | mV | RIN = 100Ω, VS = ±5V | 3 | ||
| Input Common Mode Voltage, RIN = 100Ω, VS = 3V | 0 | 1.5 | V | Differential input = 500mVP-P, VS = 3V | 4 | ||
| Input Common Mode Voltage, RIN = 100Ω, VS = 5V | 0 | 3 | V | RIN = 100Ω, VS = 5V | 4 | ||
| Input Common Mode Voltage, RIN = 100Ω, VS = ±5V | -2.5 | 1 | V | RIN = 100Ω, VS = ±5V | 4 | ||
| Output Common Mode Offset (with respect to pin 2), VS = 3V | -35 | 5 | 40 | mV | VS = 3V | 4 | |
| Output Common Mode Offset (with respect to pin 2), VS = 5V | -40 | 0 | 40 | mV | VS = 5V | 4 | |
| Output Common Mode Offset (with respect to pin 2), VS = ±5V | -55 | -5 | 35 | mV | VS = ±5V | 4 | |
| Voltage at VMID (Pin 7), VS = 5V (S8) | 2.46 | 2.51 | V | VS = 5V (S8) | 4 | ||
| VMID Input Resistance | 4.3 | 5.5 | 7.7 | kΩ | 4 | ||
| VOCM Bias Current, VS = 5V | -15 | -3 | μA | VOCM = VMID = VS/2, VS = 5V | 4 | ||
| VOCM Bias Current, VS = 3V | -10 | -3 | μA | VOCM = VMID = VS/2, VS = 3V | 4 | ||
| Differential Offset Drift | 10 | μV/°C | 3 | ||||
| Filter Gain Temperature Coefficient | 780 | ppm/C | fIN = 260kHz, VIN = 2VP-P | 3 | |||
| Total Supply Voltage | 11 | V | 2 | ||||
| Input Current | -10 | 10 | mA | Note 8 | 2 | ||
| Operating Temperature Range | -40 | 85 | °C | Note 6 | 2 | ||
| Specified Temperature Range | -40 | 85 | °C | Note 7 | 2 | ||
| Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 2 | |||
| Thermal Resistance, junction-to-ambient (S8) | θJA | 100 | °C/W | S8 package | 2 | ||
| Thermal Resistance, junction-to-ambient, 1100/1100 mm2 copper | θJA | 65 | °C/W | Topside 1100 mm2, backside 1100 mm2, board area 2500 mm2 | 12 | ||
| Thermal Resistance, junction-to-ambient, 330/330 mm2 copper | θJA | 85 | °C/W | Topside 330 mm2, backside 330 mm2, board area 2500 mm2 | 12 | ||
| Thermal Resistance, junction-to-ambient, 35/35 mm2 copper | θJA | 95 | °C/W | Topside 35 mm2, backside 35 mm2, board area 2500 mm2 | 12 | ||
| Thermal Resistance, junction-to-ambient, 35/0 mm2 copper | θJA | 100 | °C/W | Topside 35 mm2, backside 0 mm2, board area 2500 mm2 | 12 | ||
| Thermal Resistance, junction-to-ambient, 0/0 mm2 copper | θJA | 105 | °C/W | Topside 0 mm2, backside 0 mm2, board area 2500 mm2 | 12 |
CAD (KiCad official)
- Symbol:
LT6600CS8-10#PBF - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files:
lt6600cs8-10-pbf-etched.step/lt6600cs8-10-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6600cs8-10-pbf.step/lt6600cs8-10-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (16 pp, sha256
851e4743956f67b6, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6600CS8-10#PBF
**Analog Devices** · Pre-ordered Chips · SO-8
LT6600CS8-10#PBF from Analog Devices, in a SO-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN- | input | Inverting filter input, driven through an external resistor RIN, with DC differential gain of 402Ω/RIN (page 8) and input current limited to under 10mA if the differential input exceeds 1.4V. |
| 2 | VOCM | input | High-impedance DC common-mode reference for the 2nd filter stage that sets the output common-mode voltage; it can be tied to VMID or an external reference and should be bypassed with 0.01µF unless connected to a ground plane. |
| 3 | V+ | power_in | Positive supply pin, needing a quality 0.1µF ceramic bypass capacitor to V- placed as close to the IC as possible, with a total supply voltage of at most 11V. |
| 4 | OUT+ | output | Non-inverting differential filter output that can drive a 100Ω and/or 50pF load to AC ground. |
| 5 | OUT- | output | Inverting differential filter output that can drive a 100Ω and/or 50pF load to AC ground. |
| 6 | V- | power_in | Negative supply pin (ground for single-supply operation) that is fused to the lead frame for thermal conduction, with a 0.1µF ceramic bypass to V+ (or to ground in dual-supply use). |
| 7 | VMID | bidirectional | Internally mid-supply-biased pin with about 5.5kΩ impedance that sets the output common mode of the 1st filter stage; bypass it with 0.01µF to V- and, if overridden, keep it at least 1.5V from either supply rail. |
| 8 | IN+ | input | Non-inverting filter input, driven through an external resistor RIN, with DC differential gain of 402Ω/RIN (page 8) and input current limited to under 10mA if the differential input exceeds 1.4V. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SO-8 |
| Category | Interface ICs |
| Pins | 8 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Filter Gain, VS = 3V | | -0.4 | 0 | 0.5 | dB | VS = 3V, VIN = 2VP-P, fIN = DC to 260kHz | 3 |
| Filter Gain 1MHz rel 260kHz, VS = 3V | | -0.1 | 0 | 0.1 | dB | VS = 3V, VIN = 2VP-P, fIN = 1MHz (gain relative to 260kHz) | 3 |
| Filter Gain 5MHz rel 260kHz, VS = 3V | | -0.4 | -0.1 | 0.3 | dB | VS = 3V, VIN = 2VP-P, fIN = 5MHz (gain relative to 260kHz) | 3 |
| Filter Gain 8MHz rel 260kHz, VS = 3V | | -0.3 | 0.1 | 1 | dB | VS = 3V, VIN = 2VP-P, fIN = 8MHz (gain relative to 260kHz) | 3 |
| Filter Gain 10MHz rel 260kHz, VS = 3V | | -0.2 | 0.3 | 1.7 | dB | VS = 3V, VIN = 2VP-P, fIN = 10MHz (gain relative to 260kHz) | 3 |
| Filter Gain 30MHz rel 260kHz, VS = 3V | | -28 | | -25 | dB | VS = 3V, VIN = 2VP-P, fIN = 30MHz (gain relative to 260kHz) | 3 |
| Filter Gain 50MHz rel 260kHz, VS = 3V | | | | -44 | dB | VS = 3V, VIN = 2VP-P, fIN = 50MHz (gain relative to 260kHz) | 3 |
| Filter Gain, VS = 5V | | -0.5 | 0 | 0.5 | dB | VS = 5V, VIN = 2VP-P, fIN = DC to 260kHz | 3 |
| Filter Gain 1MHz rel 260kHz, VS = 5V | | -0.1 | 0 | 0.1 | dB | VS = 5V, VIN = 2VP-P, fIN = 1MHz (gain relative to 260kHz) | 4 |
| Filter Gain 5MHz rel 260kHz, VS = 5V | | -0.4 | -0.1 | 0.3 | dB | VS = 5V, VIN = 2VP-P, fIN = 5MHz (gain relative to 260kHz) | 3 |
| Filter Gain 8MHz rel 260kHz, VS = 5V | | -0.4 | 0.1 | 0.9 | dB | VS = 5V, VIN = 2VP-P, fIN = 8MHz (gain relative to 260kHz) | 3 |
| Filter Gain 10MHz rel 260kHz, VS = 5V | | -0.3 | 0.2 | 1.4 | dB | VS = 5V, VIN = 2VP-P, fIN = 10MHz (gain relative to 260kHz) | 3 |
| Filter Gain, VS = ±5V | | -0.6 | -0.1 | 0.4 | dB | VS = ±5V, VIN = 2VP-P, fIN = DC to 260kHz | 3 |
| Filter Gain, RIN = 100Ω | | 11.4 | 12 | 12.6 | dB | RIN = 100Ω, VS = 3V, 5V, ±5V, VIN = 0.5VP-P, fIN = DC to 260kHz | 3 |
| Differential Output Swing VS = 5V | | 3.85 | | 5 | VP-P DIFF | Measured between pins 4 and 5, VS = 5V | 3 |
| Differential Output Swing, pin 7 shorted to pin 2, VS = 3V | | 3.85 | | 4.9 | VP-P DIFF | Measured between pins 4 and 5, pin 7 shorted to pin 2, VS = 3V | 3 |
| Input Bias Current | | -85 | | -40 | μA | Average of pin 1 and pin 8 | 3 |
| Input Referred Differential Offset, RIN = 402Ω, VS = 3V | | 5 | | 10 | mV | RIN = 402Ω, VS = 3V | 3 |
| Input Referred Differential Offset, RIN = 402Ω, VS = 5V | | 8 | | 20 | mV | RIN = 402Ω, VS = 5V | 3 |
| Input Referred Differential Offset, RIN = 402Ω, VS = ±5V | | 30 | | 35 | mV | RIN = 402Ω, VS = ±5V | 3 |
| Input Referred Differential Offset, RIN = 100Ω, VS = 3V | | 5 | | 13 | mV | RIN = 100Ω, VS = 3V | 3 |
| Input Referred Differential Offset, RIN = 100Ω, VS = 5V | | 5 | | 22 | mV | RIN = 100Ω, VS = 5V | 3 |
| Input Referred Differential Offset, RIN = 100Ω, VS = ±5V | | 5 | | 30 | mV | RIN = 100Ω, VS = ±5V | 3 |
| Input Common Mode Voltage, RIN = 100Ω, VS = 3V | | 0 | | 1.5 | V | Differential input = 500mVP-P, VS = 3V | 4 |
| Input Common Mode Voltage, RIN = 100Ω, VS = 5V | | 0 | | 3 | V | RIN = 100Ω, VS = 5V | 4 |
| Input Common Mode Voltage, RIN = 100Ω, VS = ±5V | | -2.5 | | 1 | V | RIN = 100Ω, VS = ±5V | 4 |
| Output Common Mode Offset (with respect to pin 2), VS = 3V | | -35 | 5 | 40 | mV | VS = 3V | 4 |
| Output Common Mode Offset (with respect to pin 2), VS = 5V | | -40 | 0 | 40 | mV | VS = 5V | 4 |
| Output Common Mode Offset (with respect to pin 2), VS = ±5V | | -55 | -5 | 35 | mV | VS = ±5V | 4 |
| Voltage at VMID (Pin 7), VS = 5V (S8) | | 2.46 | | 2.51 | V | VS = 5V (S8) | 4 |
| VMID Input Resistance | | 4.3 | 5.5 | 7.7 | kΩ | | 4 |
| VOCM Bias Current, VS = 5V | | -15 | | -3 | μA | VOCM = VMID = VS/2, VS = 5V | 4 |
| VOCM Bias Current, VS = 3V | | -10 | | -3 | μA | VOCM = VMID = VS/2, VS = 3V | 4 |
| Differential Offset Drift | | | 10 | | μV/°C | | 3 |
| Filter Gain Temperature Coefficient | | | 780 | | ppm/C | fIN = 260kHz, VIN = 2VP-P | 3 |
| Total Supply Voltage | | | | 11 | V | | 2 |
| Input Current | | -10 | | 10 | mA | Note 8 | 2 |
| Operating Temperature Range | | -40 | | 85 | °C | Note 6 | 2 |
| Specified Temperature Range | | -40 | | 85 | °C | Note 7 | 2 |
| Junction Temperature | TJMAX | | | 150 | °C | | 2 |
| Storage Temperature Range | | -65 | | 150 | °C | | 2 |
| Lead Temperature | | | | 300 | °C | Soldering, 10 sec | 2 |
| Thermal Resistance, junction-to-ambient (S8) | θJA | | 100 | | °C/W | S8 package | 2 |
| Thermal Resistance, junction-to-ambient, 1100/1100 mm2 copper | θJA | | 65 | | °C/W | Topside 1100 mm2, backside 1100 mm2, board area 2500 mm2 | 12 |
| Thermal Resistance, junction-to-ambient, 330/330 mm2 copper | θJA | | 85 | | °C/W | Topside 330 mm2, backside 330 mm2, board area 2500 mm2 | 12 |
| Thermal Resistance, junction-to-ambient, 35/35 mm2 copper | θJA | | 95 | | °C/W | Topside 35 mm2, backside 35 mm2, board area 2500 mm2 | 12 |
| Thermal Resistance, junction-to-ambient, 35/0 mm2 copper | θJA | | 100 | | °C/W | Topside 35 mm2, backside 0 mm2, board area 2500 mm2 | 12 |
| Thermal Resistance, junction-to-ambient, 0/0 mm2 copper | θJA | | 105 | | °C/W | Topside 0 mm2, backside 0 mm2, board area 2500 mm2 | 12 |
## CAD (KiCad official)
- Symbol: `LT6600CS8-10#PBF`
- Footprint: `Package_SO:SOIC-8_3.9x4.9mm_P1.27mm`
- 3D model: SO-8 (KiCad packages3D, STEP)
- 3D model files: `lt6600cs8-10-pbf-etched.step` / `lt6600cs8-10-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6600cs8-10-pbf.step` / `lt6600cs8-10-pbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/66001fe.pdf) (16 pp, sha256 `851e4743956f67b6`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6600cs8-10-pbf-datasheet.pdf)