main
Ray Publish 0.1.0 0778e77
{
  "slug": "lt6553ign",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices Video Amplifiers, SSOP-16. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "operational amplifier-comparator",
    "lt6553ign#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt6553ign.kicad_sym",
    "lt6553ign.kicad_mod",
    "lt6553ign.glb",
    "lt6553ign.step",
    "lt6553ign.lbr",
    "docs/hero.png",
    "docs/lt6553ign-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt6553ign-hero.glb",
    "lt6553ign-hero.overlay.json"
  ],
  "component": {
    "mpn": "LT6553IGN",
    "manufacturer": "Analog Devices",
    "package": "SSOP-16",
    "pin_count": 16,
    "category": "Operational Amplifier/Comparator",
    "subcategory": "Video Amplifiers",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/6553f.pdf",
    "parts": {
      "symbol": "lt6553ign.kicad_sym",
      "footprint": "lt6553ign.kicad_mod",
      "model_3d": "lt6553ign-hero.glb",
      "model_3d_plain": "lt6553ign.glb",
      "model_3d_step": "lt6553ign-etched.step",
      "model_3d_step_plain": "lt6553ign.step",
      "lbr": "lt6553ign.lbr"
    },
    "distributor_links": {
      "lcsc": "C673155",
      "digikey": "LT6553IGN#PBF-ND",
      "mouser": "584-LT6553IGN#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-11-18T17:36:03Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "LT6553IGN#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT6553IGN#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "EN",
        "type": "input",
        "description": "Enable control pin with internal 46k pull-up that turns the part off if unconnected, and pulling it low enables the part (TTL compatible, referenced to DGND, VEN - VDGND ≤ 5.5V)."
      },
      {
        "number": "2",
        "name": "DGND",
        "type": "power_in",
        "description": "Digital ground reference for the EN pin, normally connected to ground, with V+ - VDGND ≥ 3V required."
      },
      {
        "number": "3",
        "name": "INR",
        "type": "input",
        "description": "Red channel input with nominal impedance of 400kΩ and no internal termination resistor."
      },
      {
        "number": "4",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground for the 370Ω gain resistor of the red channel amplifier."
      },
      {
        "number": "5",
        "name": "ING",
        "type": "input",
        "description": "Green channel input with nominal impedance of 400kΩ and no internal termination resistor."
      },
      {
        "number": "6",
        "name": "AGND",
        "type": "power_in",
        "description": "Analog ground shared by the 370Ω gain resistors of the green and blue channel amplifiers, where additional resistance increases green/blue crosstalk."
      },
      {
        "number": "7",
        "name": "INB",
        "type": "input",
        "description": "Blue channel input with nominal impedance of 400kΩ and no internal termination resistor."
      },
      {
        "number": "8",
        "name": "V–",
        "type": "power_in",
        "description": "Negative supply voltage, not internally connected to the other V- pins so all must be connected externally with proper bypassing."
      },
      {
        "number": "9",
        "name": "V–",
        "type": "power_in",
        "description": "Negative supply voltage for the blue channel output stage, not internally connected to other V- pins and must be connected externally with proper bypassing."
      },
      {
        "number": "10",
        "name": "OUTB",
        "type": "output",
        "description": "Blue channel output at twice the blue input (gain of 2), performing optimally with a 150Ω load."
      },
      {
        "number": "11",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply voltage for the output stages of amplifiers B and G, not internally connected to other V+ pins and must be connected externally with proper bypassing."
      },
      {
        "number": "12",
        "name": "OUTG",
        "type": "output",
        "description": "Green channel output at twice the green input (gain of 2), performing optimally with a 150Ω load."
      },
      {
        "number": "13",
        "name": "V–",
        "type": "power_in",
        "description": "Negative supply voltage for the output stages of amplifiers G and R, not internally connected to other supply pins and must be connected externally with proper bypassing."
      },
      {
        "number": "14",
        "name": "OUTR",
        "type": "output",
        "description": "Red channel output at twice the red input (gain of 2), performing optimally with a 150Ω load."
      },
      {
        "number": "15",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply voltage for the output stage of amplifier R, not internally connected to other V+ pins and must be connected externally with proper bypassing."
      },
      {
        "number": "16",
        "name": "V+",
        "type": "power_in",
        "description": "Positive supply voltage, not internally connected to other V+ pins and must be connected externally with proper bypassing."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-opus-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Datasheet pin 13 text says 'V+ pins are not internally connected' although the pin is V–; treated as; The datasheet pin list describes only some of the supply pins by function. Every supply pin must be "
        ],
        "pages_sent": 12,
        "cost_usd": 0.2205,
        "at": "2026-11-18T17:35:42"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/6553f.pdf",
        "pages": 12,
        "sha256": "673fd420e4d2fec9",
        "source_tier": "mfr",
        "citation": "Analog Devices datasheet"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 16,
        "described": 16,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt6553ign.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d0e11e46aeca5dbaa5c4bb538f3f4899761267cabdeba6486325ae9e979c03ef",
        "checked": "2026-11-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt6553ign-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          7.8,
          6.2,
          2.1
        ],
        "zmin_mm": 0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "d4ecdda3d7db97542651ad5ddf78a15514af17d277df9bebf5cad66ffb178c5a",
        "checked": "2026-11-18",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ]
  }
}