main
History Download
Ray Publish 0.1.0 0bb5f92

LT6300IGN#PBF

Analog Devices · Operational Amplifier · SSOP-16-150mil

LT6300IGN#PBF from Analog Devices, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 V- power_in Negative supply pin, one of four corner pins (1, 8, 9, 16) tied to the leadframe and electrically connected to V-; absolute maximum supply is ±13.5V (V+ to V-) and the part is specified for ±5V to ±12V.
2 -IN input Inverting input of amplifier A; absolute maximum input current is ±10mA.
3 +IN input Noninverting input of amplifier A; input common-mode range is V+ - 2V to V- + 2V with VCM = 0V tested and CMRR of 83dB typical.
4 SHDN input Shutdown control pin; the driver is shut down and outputs go high impedance when SHDN is less than SHDNREF + 0.4V, and RBIAS between V+ and SHDN sets the quiescent current per amplifier.
5 SHDNREF input Shutdown reference pin, normally grounded, which sets the reference level for the SHDN threshold (SHDN must be below SHDNREF + 0.4V to shut down).
6 +IN input Noninverting input of amplifier B; input common-mode range is V+ - 2V to V- + 2V with VCM = 0V tested and CMRR of 83dB typical.
7 -IN input Inverting input of amplifier B; absolute maximum input current is ±10mA.
8 V- power_in Negative supply pin, one of four corner pins (1, 8, 9, 16) tied to the leadframe and electrically connected to V-; absolute maximum supply is ±13.5V (V+ to V-) and the part is specified for ±5V to ±12V.
9 V- power_in Negative supply pin, one of four corner pins (1, 8, 9, 16) tied to the leadframe and electrically connected to V-; absolute maximum supply is ±13.5V (V+ to V-) and the part is specified for ±5V to ±12V.
10 OUT output Output of amplifier B; sources and sinks at least ±500mA and is short-circuit protected to ground for indefinite duration.
11 NC unconnected No connection.
12 V+ power_in Positive supply pin; absolute maximum supply is ±13.5V (V+ to V-) and the part is specified for ±5V to ±12V.
13 V+ power_in Positive supply pin; absolute maximum supply is ±13.5V (V+ to V-) and the part is specified for ±5V to ±12V.
14 NC unconnected No connection.
15 OUT output Output of amplifier A; sources and sinks at least ±500mA and is short-circuit protected to ground for indefinite duration.
16 V- power_in Negative supply pin, one of four corner pins (1, 8, 9, 16) tied to the leadframe and electrically connected to V-; absolute maximum supply is ±13.5V (V+ to V-) and the part is specified for ±5V to ±12V.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SSOP-16-150mil
Category Operational Amplifier/Comparator
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage (V+ to V-) 13.5 V V+ to V-; printed as ±13.5V 2
Input Current -10 10 mA printed as ±10mA 2
Operating Temperature Range -40 85 °C 2
Specified Temperature Range -40 85 °C Note 3 2
Junction Temperature 150 °C 2
Storage Temperature Range -65 150 °C 2
Lead Temperature 300 °C Soldering, 10 sec 2
Thermal Resistance Junction-to-Ambient θJA 70 95 °C/W Varies with PC board metal on pins 1, 8, 9, 16 (Note 4) 2
Input Offset Voltage VOS 1 5 mV 2
Input Offset Voltage VOS 7.5 mV ● full specified temperature range 2
Input Offset Voltage Matching 0.3 5 mV 2
Input Offset Voltage Matching 7.5 mV ● full specified temperature range 2
Input Offset Voltage Drift 10 µV/°C ● full specified temperature range 2
Input Offset Current IOS 100 500 nA 2
Input Offset Current IOS 800 nA ● full specified temperature range 2
Input Bias Current IB -4 0.1 4 µA 2
Input Bias Current IB -6 6 µA ● full specified temperature range 2
Input Bias Current Matching 100 500 nA 2
Input Bias Current Matching 800 nA ● full specified temperature range 2
Input Resistance RIN 5 50 MΩ ● VCM = (V+, 2V) to (V-+ 2V) 2
Common Mode Rejection Ratio CMRR 74 83 dB VCM = (V+, 2V) to (V- + 2V) 2
Common Mode Rejection Ratio CMRR 66 dB ● full specified temperature range 2
Power Supply Rejection Ratio PSRR 74 88 dB VS = ±4V to ±12V 2
Power Supply Rejection Ratio PSRR 66 dB ● full specified temperature range 2
Large-Signal Voltage Gain AVOL 63 76 dB VS = ±12V, VOUT = ±10V, RL = 40Ω 3
Large-Signal Voltage Gain AVOL 57 dB ● full specified temperature range 3
Large-Signal Voltage Gain AVOL 60 70 dB VS = ±5V, VOUT = ±3V, RL = 25Ω 3
Large-Signal Voltage Gain AVOL 54 dB ● full specified temperature range 3
Output Swing VOUT 10.7 10.9 ±V VS = ±12V, RL = 100Ω 3
Output Swing VOUT 10.5 ±V ● full specified temperature range 3
Output Swing VOUT 10.4 10.7 ±V VS = ±12V, IL = 250mA 3
Output Swing VOUT 10.2 ±V ● full specified temperature range 3
Output Swing VOUT 3.5 3.8 ±V VS = ±5V, RL = 25Ω 3
Output Swing VOUT 3.3 ±V ● full specified temperature range 3
Output Swing VOUT 3.4 3.7 ±V VS = ±5V, IL = 250mA 3
Output Swing VOUT 3.2 ±V ● full specified temperature range 3
Maximum Output Current IOUT 500 1200 mA VS = ±12V, RL = 1Ω 3
Supply Current per Amplifier IS 8 10 13.5 mA VS = ±12V, RBIAS = 24.9k (Note 6) 3
Supply Current per Amplifier IS 6.7 15 mA ● full specified temperature range 3
Supply Current per Amplifier IS 2.2 3.4 5 mA VS = ±5V, RBIAS = 24.9k (Note 6) 3
Supply Current per Amplifier IS 1.8 5.8 mA ● full specified temperature range 3
Supply Current in Shutdown 0.1 1 mA VSHDN = 0.4V 3
Output Leakage in Shutdown 0.3 1 mA VSHDN = 0.4V 3
Channel Separation 80 110 dB VS = ±12V, VOUT = ±10V, RL = 40Ω 3
Channel Separation 77 dB ● full specified temperature range 3
Slew Rate SR 300 600 V/µs VS = ±12V, AV = -10, (Note 7) 3
Slew Rate SR 100 200 V/µs VS = ±5V, AV = -10, (Note 7) 3

CAD (KiCad official)

  • Symbol: LT6300IGN#PBF
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: lt6300ign-etched.step / lt6300ign-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6300ign.step / lt6300ign.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (16 pp, sha256 3b7cf0810287ac6d, retrieved 2026-11-11, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF