# LT6206IMS8#PBF

**Analog Devices** · Video Amplifiers · MSOP-8

LT6206IMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

## Pinout

| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; the datasheet states output short-circuit duration is indefinite and short-circuit current is 20mA to 60mA at 5V and 15mA to 50mA at 3V. |
| 2 | -IN A | input | Channel A inverting input; inputs are protected by back-to-back diodes and input current should be limited to less than ±10mA when the differential input voltage exceeds 1.4V. |
| 3 | +IN A | input | Channel A non-inverting input; input voltage range is ±VS and the input can be driven beyond the supplies without damage or phase reversal of the output. |
| 4 | V- | power_in | Negative supply; total supply voltage V+ to V- must not exceed 12.6V per the absolute maximum ratings, and the part is specified on 3V, 5V and ±5V supplies. |
| 5 | +IN B | input | Channel B non-inverting input; input voltage range is ±VS and the input can be driven beyond the supplies without damage or phase reversal of the output. |
| 6 | -IN B | input | Channel B inverting input; inputs are protected by back-to-back diodes and input current should be limited to less than ±10mA when the differential input voltage exceeds 1.4V. |
| 7 | OUT B | output | Channel B output; the datasheet states output short-circuit duration is indefinite and short-circuit current is 20mA to 60mA at 5V and 15mA to 50mA at 3V. |
| 8 | V+ | power_in | Positive supply; total supply voltage V+ to V- must not exceed 12.6V per the absolute maximum ratings, and pin current while exceeding supplies is limited to ±25mA. |

## Key specifications

| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |

## Electrical characteristics

Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).

| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS |  | 1 | 5 | mV | VS = 3V/5V, 0V; VCM = VOUT = 1V, I grade | 3 |
| Input Offset Voltage Drift |  |  | 7 | 15 | μV/°C | Note 6 | 3 |
| Input Bias Current | IB |  | 10 | 30 | μA | VS = 3V/5V, 0V; VCM = VOUT = 1V | 3 |
| Input Offset Current | IOS |  | 0.6 | 3 | μA | VS = 3V/5V, 0V; VCM = VOUT = 1V | 3 |
| Common Mode Rejection Ratio | CMRR | 78 | 90 |  | dB | VCM = 0V to V+, 2V | 3 |
| Input Voltage Range |  | 0 |  |  | V | Maximum is V+, 2 V as printed | 3 |
| Power Supply Rejection Ratio | PSRR | 67 | 75 |  | dB | VS = 3V to 12V, VCM = VOUT = 0.5V | 3 |
| Minimum Supply Voltage |  |  |  | 2.7 | V | VCM = 0.5V | 3 |
| Supply Current per Amplifier | IS |  | 3.75 | 6.5 | mA | VS = 5V, 0V; I grade, per amplifier | 3 |
| Gain Bandwidth Product | GBW | 65 | 100 |  | MHz | f = 2MHz | 3 |
| Slew Rate | SR |  | 450 |  | V/μs | VS = 5V, AV = 2, RF = RG = 1k | 3 |
| Channel Separation |  |  | 90 |  | dB | f = 10MHz | 3 |
| Input Offset Voltage | VOS |  | 1 | 6 | mV | VS = ±5V; VCM = VOUT = 0V, I grade | 4 |
| Input Offset Voltage Drift |  |  | 10 | 18 | μV/°C | Note 6, ±5V | 4 |
| Input Bias Current | IB |  | 18 | 30 | μA | VS = ±5V; VCM = VOUT = 0V | 4 |
| Input Offset Current | IOS |  | 0.6 | 3 | μA | VS = ±5V; VCM = VOUT = 0V | 4 |
| Common Mode Rejection Ratio | CMRR | 78 | 90 |  | dB | VCM = -5V to 3V | 4 |
| Input Voltage Range |  | -5 |  | 3 | V | VS = ±5V | 4 |
| Power Supply Rejection Ratio | PSRR | 67 | 75 |  | dB | VS = ±2V to ±6V | 4 |
| Supply Current per Amplifier | IS |  | 4 | 6.5 | mA | VS = ±5V; I grade, per amplifier | 4 |
| Gain Bandwidth Product | GBW | 65 | 100 |  | MHz | f = 2MHz, VS = ±5V | 4 |
| Input Current |  | -10 |  | 10 | mA |  | 2 |
| Pin Current While Exceeding Supplies |  | -25 |  | 25 | mA | Note 9 | 2 |
| Operating Temperature Range, I grade |  | -40 |  | 85 | °C | LT6206I | 2 |
| Specified Temperature Range, I grade |  | -40 |  | 85 | °C | LT6206I | 2 |
| Storage Temperature Range |  | -65 |  | 150 | °C |  | 2 |
| Maximum Junction Temperature | TJMAX |  |  | 150 | °C |  | 2 |
| Lead Temperature (Soldering, 10 sec) |  |  |  | 300 | °C | 10 sec | 2 |
| Thermal Resistance, junction to ambient, MS8 | θJA |  | 250 |  | °C/W | 8-Lead MSOP | 2 |

## CAD (KiCad official)

- Symbol: `LT6206IMS8#PBF`
- Footprint: `Package_SO:MSOP-8_3x3mm_P0.65mm`
- 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files: `lt6206ims8-pbf-etched.step` / `lt6206ims8-pbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6206ims8-pbf.step` / `lt6206ims8-pbf.glb` are the bare package body.

## Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/620567fc.pdf) (18 pp, sha256 `dcdb68d1efcc0b7a`, retrieved 2026-10-28, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).

[Datasheet PDF](docs/lt6206ims8-pbf-datasheet.pdf)