component
LT6206IMS8#PBF
Public Made by Adomby adom
Analog Devices Video Amplifiers, MSOP-8. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownLT6206IMS8#PBF
Analog Devices · Video Amplifiers · MSOP-8
LT6206IMS8#PBF from Analog Devices, in a MSOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUT A | output | Channel A output; the datasheet states output short-circuit duration is indefinite and short-circuit current is 20mA to 60mA at 5V and 15mA to 50mA at 3V. |
| 2 | -IN A | input | Channel A inverting input; inputs are protected by back-to-back diodes and input current should be limited to less than ±10mA when the differential input voltage exceeds 1.4V. |
| 3 | +IN A | input | Channel A non-inverting input; input voltage range is ±VS and the input can be driven beyond the supplies without damage or phase reversal of the output. |
| 4 | V- | power_in | Negative supply; total supply voltage V+ to V- must not exceed 12.6V per the absolute maximum ratings, and the part is specified on 3V, 5V and ±5V supplies. |
| 5 | +IN B | input | Channel B non-inverting input; input voltage range is ±VS and the input can be driven beyond the supplies without damage or phase reversal of the output. |
| 6 | -IN B | input | Channel B inverting input; inputs are protected by back-to-back diodes and input current should be limited to less than ±10mA when the differential input voltage exceeds 1.4V. |
| 7 | OUT B | output | Channel B output; the datasheet states output short-circuit duration is indefinite and short-circuit current is 20mA to 60mA at 5V and 15mA to 50mA at 3V. |
| 8 | V+ | power_in | Positive supply; total supply voltage V+ to V- must not exceed 12.6V per the absolute maximum ratings, and pin current while exceeding supplies is limited to ±25mA. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | MSOP-8 |
| Category | Operational Amplifier/Comparator |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 1 | 5 | mV | VS = 3V/5V, 0V; VCM = VOUT = 1V, I grade | 3 | |
| Input Offset Voltage Drift | 7 | 15 | μV/°C | Note 6 | 3 | ||
| Input Bias Current | IB | 10 | 30 | μA | VS = 3V/5V, 0V; VCM = VOUT = 1V | 3 | |
| Input Offset Current | IOS | 0.6 | 3 | μA | VS = 3V/5V, 0V; VCM = VOUT = 1V | 3 | |
| Common Mode Rejection Ratio | CMRR | 78 | 90 | dB | VCM = 0V to V+, 2V | 3 | |
| Input Voltage Range | 0 | V | Maximum is V+, 2 V as printed | 3 | |||
| Power Supply Rejection Ratio | PSRR | 67 | 75 | dB | VS = 3V to 12V, VCM = VOUT = 0.5V | 3 | |
| Minimum Supply Voltage | 2.7 | V | VCM = 0.5V | 3 | |||
| Supply Current per Amplifier | IS | 3.75 | 6.5 | mA | VS = 5V, 0V; I grade, per amplifier | 3 | |
| Gain Bandwidth Product | GBW | 65 | 100 | MHz | f = 2MHz | 3 | |
| Slew Rate | SR | 450 | V/μs | VS = 5V, AV = 2, RF = RG = 1k | 3 | ||
| Channel Separation | 90 | dB | f = 10MHz | 3 | |||
| Input Offset Voltage | VOS | 1 | 6 | mV | VS = ±5V; VCM = VOUT = 0V, I grade | 4 | |
| Input Offset Voltage Drift | 10 | 18 | μV/°C | Note 6, ±5V | 4 | ||
| Input Bias Current | IB | 18 | 30 | μA | VS = ±5V; VCM = VOUT = 0V | 4 | |
| Input Offset Current | IOS | 0.6 | 3 | μA | VS = ±5V; VCM = VOUT = 0V | 4 | |
| Common Mode Rejection Ratio | CMRR | 78 | 90 | dB | VCM = -5V to 3V | 4 | |
| Input Voltage Range | -5 | 3 | V | VS = ±5V | 4 | ||
| Power Supply Rejection Ratio | PSRR | 67 | 75 | dB | VS = ±2V to ±6V | 4 | |
| Supply Current per Amplifier | IS | 4 | 6.5 | mA | VS = ±5V; I grade, per amplifier | 4 | |
| Gain Bandwidth Product | GBW | 65 | 100 | MHz | f = 2MHz, VS = ±5V | 4 | |
| Input Current | -10 | 10 | mA | 2 | |||
| Pin Current While Exceeding Supplies | -25 | 25 | mA | Note 9 | 2 | ||
| Operating Temperature Range, I grade | -40 | 85 | °C | LT6206I | 2 | ||
| Specified Temperature Range, I grade | -40 | 85 | °C | LT6206I | 2 | ||
| Storage Temperature Range | -65 | 150 | °C | 2 | |||
| Maximum Junction Temperature | TJMAX | 150 | °C | 2 | |||
| Lead Temperature (Soldering, 10 sec) | 300 | °C | 10 sec | 2 | |||
| Thermal Resistance, junction to ambient, MS8 | θJA | 250 | °C/W | 8-Lead MSOP | 2 |
CAD (KiCad official)
- Symbol:
LT6206IMS8#PBF - Footprint:
Package_SO:MSOP-8_3x3mm_P0.65mm - 3D model: MSOP-8 (KiCad packages3D, STEP)
- 3D model files:
lt6206ims8-pbf-etched.step/lt6206ims8-pbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6206ims8-pbf.step/lt6206ims8-pbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (18 pp, sha256
dcdb68d1efcc0b7a, retrieved 2026-10-28, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).