main
Ray
Publish 0.1.0
1849c31
LT6110IDC#TRMPBF
Analog Devices · Power Management Specialized - PMIC · DFN-8-EP(2x2)
LT6110IDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive input to the internal sense amplifier, which drives +IN to the same potential as -IN; a resistor R+IN from V+ to +IN sets the IOUT and IMON output currents. |
| 2 | V+ | power_in | Positive power supply, connected to the more positive side of the sense resistor, with a minimum of 0.1µF required from V+ to V-; supply range is 2.0 V to 50 V. |
| 3 | RS | passive | Internal sense resistor terminal, connected to the load to use the internal 20 mΩ sense resistor, and left open when an external sense resistor is used. |
| 4 | -IN | input | Negative input to the internal sense amplifier, which must be tied to the system load side of the sense resistor, either directly or through a resistor. |
| 5 | V- | power_in | Negative power supply, normally connected to ground. |
| 6 | IMON | output | Sourcing current output that sources a current equal to 3 • VSENSE/RIN. |
| 7 | IOUT | output | Sinking current output that sinks a current equal to VSENSE/RIN, where VSENSE is the voltage across the sense resistor. |
| 8 | NC | unconnected | Not internally connected. |
| 9 | V- | power_in | Exposed pad is V-, and it must be soldered to the PCB. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+ Supply Range | V+ | 2 | 50 | V | 3 | ||
| Amplifier Input Offset Voltage (25°C) | VOS | 100 | 300 | µV | 3 | ||
| Amplifier Input Offset Voltage (0°C to 85°C) | VOS | 400 | µV | 0°C ≤ TA ≤ 85°C (Note 5) | 3 | ||
| Amplifier Input Offset Voltage (-40°C to 0°C) | VOS | 550 | µV | -40°C ≤ TA ≤ 0°C (Note 5) | 3 | ||
| Amplifier Input Offset Voltage Change with I+IN (25°C) | ∆VOS/∆I+IN | 0.15 | 0.3 | mV/mA | I+IN = 10µA to 1mA | 3 | |
| Amplifier Input Offset Voltage Change with I+IN (0°C to 85°C) | ∆VOS/∆I+IN | 0.5 | mV/mA | I+IN = 10µA to 1mA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 | ||
| Amplifier Input Offset Voltage Change with I+IN (full specified range) | ∆VOS/∆I+IN | 1.5 | mV/mA | I+IN = 10µA to 1mA | 3 | ||
| Amplifier Input Offset Voltage Change with IOUT Voltage | ∆VOS/∆VIOUT | 0.005 | 0.02 | mV/V | VIOUT = 0.4V to 5V | 3 | |
| Amplifier Input Offset Voltage Change with IMON Voltage | ∆VOS/∆VIMON | 0.3 | 1 | mV/V | VIMON = 0V to 1V | 3 | |
| Amplifier Input Offset Voltage Drift | ∆VOS/∆T | 1 | µV/°C | 3 | |||
| Amplifier Input Bias Current (-IN) (25°C) | IB | 35 | 70 | nA | V+ = 5V | 3 | |
| Amplifier Input Bias Current (-IN) (full specified range) | IB | 100 | nA | V+ = 5V | 3 | ||
| Power Supply Rejection Ratio (V+ = 2.0V to 36V) | PSRR | 96 | 110 | dB | V+ = 2.0V to 36V | 3 | |
| Power Supply Rejection Ratio (V+ = 36V to 50V) | PSRR | 90 | 100 | dB | V+ = 36V to 50V | 3 | |
| IOUT Current Error (25°C) | 0.6 | 1.6 | % | I+IN = 10µA | 3 | ||
| IOUT Current Error (0°C to 85°C) | 2 | % | I+IN = 10µA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 | |||
| IOUT Current Error (full specified range) | 2.5 | % | I+IN = 10µA | 3 | |||
| IOUT Current Error (25°C) | 0.5 | 1 | % | I+IN = 100µA | 3 | ||
| IOUT Current Error (0°C to 85°C) | 1.5 | % | I+IN = 100µA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 | |||
| IOUT Current Error (full specified range) | 2.3 | % | I+IN = 100µA | 3 | |||
| IOUT Current Error (25°C) | 0.75 | 2.5 | % | I+IN = 1mA | 3 | ||
| IOUT Current Error (0°C to 85°C) | 3 | % | I+IN = 1mA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 | |||
| IOUT Current Error (full specified range) | 4 | % | I+IN = 1mA | 3 | |||
| IMON Current Error (25°C) | 1.5 | 3 | % | I+IN = 10µA | 3 | ||
| IMON Current Error (0°C to 85°C) | 3.5 | % | I+IN = 10µA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 | |||
| IMON Current Error (full specified range) | 5 | % | I+IN = 10µA | 3 | |||
| IMON Current Error (25°C) | 1.7 | 4 | % | I+IN = 1mA | 3 | ||
| IMON Current Error (0°C to 85°C) | 5 | % | I+IN = 1mA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 | |||
| IMON Current Error (full specified range) | 6 | % | I+IN = 1mA | 3 | |||
| IOUT Current Error Change with IOUT Voltage | ∆IIOUT/VIOUT | 0.2 | %/V | VIOUT = 0.4V to 3.5V | 3 | ||
| IOUT Current Error Change with IOUT Voltage | ∆IIOUT/VIOUT | 0.4 | %/V | VIOUT = 0.4V to 5V | 3 | ||
| IMON Current Error Change with IMON Voltage | ∆IIMON/VIMON | 0.2 | %/V | VIMON = 0V to 3.1V, VIOUT = 5V | 3 | ||
| +IN Current Range | 0.01 | 1 | mA | 3 | |||
| Supply Current (25°C) | IS | 16 | 30 | µA | V+ = 5V, I+IN = 0µA | 3 | |
| Supply Current (full specified range) | IS | 50 | µA | V+ = 5V, I+IN = 0µA | 3 | ||
| Supply Current (25°C) | IS | 30 | 50 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V | 3 | |
| Supply Current (full specified range) | IS | 100 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V | 3 | ||
| RSENSE Resistance | RSENSE | 0.0165 | 0.02 | 0.0225 | Ω | (Note 2) | 3 |
| RSENSE Tolerance (internal, typical) | RSENSE | -7.5 | 7.5 | % | Internal sense resistor, typical tolerance | 13 | |
| RSENSE Temperature Coefficient (internal) | RSENSE | 3400 | ppm/°C | Internal sense resistor (Temperature Errors section) | 24 | ||
| IOUT to IMON Voltage | VIOUT, VIMON | -0.6 | 36 | V | 2 | ||
| V+, +IN to IOUT Voltage | 36 | V | 2 | ||||
| +IN, -IN, IOUT, IMON Current | 10 | mA | 2 | ||||
| RSENSE Current Continuous | 3 | A | (Note 2) | 2 | |||
| RSENSE Current Transient | 5 | A | <0.1 Second | 2 | |||
| Junction Temperature | TJ | 150 | °C | 2 | |||
| Storage Temperature Range | TSTG | -65 | 150 | °C | 2 | ||
| Specified Temperature Range (LT6110I) | -40 | 85 | °C | LT6110I (Note 3) | 2 | ||
| Thermal Resistance Junction-to-Ambient (DFN) | θJA | 80.6 | °C/W | DC package (8-lead 2mm × 2mm DFN) | 2 |
CAD (KiCad official)
- Symbol:
LT6110IDC#TRMPBF - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm - 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files:
lt6110idc-trmpbf-etched.step/lt6110idc-trmpbf-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lt6110idc-trmpbf.step/lt6110idc-trmpbf.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (38 pp, sha256
5bac8d73041462a0, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
# LT6110IDC#TRMPBF
**Analog Devices** · Power Management Specialized - PMIC · DFN-8-EP(2x2)
LT6110IDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
## Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | +IN | input | Positive input to the internal sense amplifier, which drives +IN to the same potential as -IN; a resistor R+IN from V+ to +IN sets the IOUT and IMON output currents. |
| 2 | V+ | power_in | Positive power supply, connected to the more positive side of the sense resistor, with a minimum of 0.1µF required from V+ to V-; supply range is 2.0 V to 50 V. |
| 3 | RS | passive | Internal sense resistor terminal, connected to the load to use the internal 20 mΩ sense resistor, and left open when an external sense resistor is used. |
| 4 | -IN | input | Negative input to the internal sense amplifier, which must be tied to the system load side of the sense resistor, either directly or through a resistor. |
| 5 | V- | power_in | Negative power supply, normally connected to ground. |
| 6 | IMON | output | Sourcing current output that sources a current equal to 3 • VSENSE/RIN. |
| 7 | IOUT | output | Sinking current output that sinks a current equal to VSENSE/RIN, where VSENSE is the voltage across the sense resistor. |
| 8 | NC | unconnected | Not internally connected. |
| 9 | V- | power_in | Exposed pad is V-, and it must be soldered to the PCB. |
## Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
## Electrical characteristics
Limits as printed in the datasheet (page.json `metadata.characteristics` carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| V+ Supply Range | V+ | 2 | | 50 | V | | 3 |
| Amplifier Input Offset Voltage (25°C) | VOS | | 100 | 300 | µV | | 3 |
| Amplifier Input Offset Voltage (0°C to 85°C) | VOS | | | 400 | µV | 0°C ≤ TA ≤ 85°C (Note 5) | 3 |
| Amplifier Input Offset Voltage (-40°C to 0°C) | VOS | | | 550 | µV | -40°C ≤ TA ≤ 0°C (Note 5) | 3 |
| Amplifier Input Offset Voltage Change with I+IN (25°C) | ∆VOS/∆I+IN | | 0.15 | 0.3 | mV/mA | I+IN = 10µA to 1mA | 3 |
| Amplifier Input Offset Voltage Change with I+IN (0°C to 85°C) | ∆VOS/∆I+IN | | | 0.5 | mV/mA | I+IN = 10µA to 1mA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| Amplifier Input Offset Voltage Change with I+IN (full specified range) | ∆VOS/∆I+IN | | | 1.5 | mV/mA | I+IN = 10µA to 1mA | 3 |
| Amplifier Input Offset Voltage Change with IOUT Voltage | ∆VOS/∆VIOUT | | 0.005 | 0.02 | mV/V | VIOUT = 0.4V to 5V | 3 |
| Amplifier Input Offset Voltage Change with IMON Voltage | ∆VOS/∆VIMON | | 0.3 | 1 | mV/V | VIMON = 0V to 1V | 3 |
| Amplifier Input Offset Voltage Drift | ∆VOS/∆T | | | 1 | µV/°C | | 3 |
| Amplifier Input Bias Current (-IN) (25°C) | IB | | 35 | 70 | nA | V+ = 5V | 3 |
| Amplifier Input Bias Current (-IN) (full specified range) | IB | | | 100 | nA | V+ = 5V | 3 |
| Power Supply Rejection Ratio (V+ = 2.0V to 36V) | PSRR | 96 | 110 | | dB | V+ = 2.0V to 36V | 3 |
| Power Supply Rejection Ratio (V+ = 36V to 50V) | PSRR | 90 | 100 | | dB | V+ = 36V to 50V | 3 |
| IOUT Current Error (25°C) | | | 0.6 | 1.6 | % | I+IN = 10µA | 3 |
| IOUT Current Error (0°C to 85°C) | | | | 2 | % | I+IN = 10µA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IOUT Current Error (full specified range) | | | | 2.5 | % | I+IN = 10µA | 3 |
| IOUT Current Error (25°C) | | | 0.5 | 1 | % | I+IN = 100µA | 3 |
| IOUT Current Error (0°C to 85°C) | | | | 1.5 | % | I+IN = 100µA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IOUT Current Error (full specified range) | | | | 2.3 | % | I+IN = 100µA | 3 |
| IOUT Current Error (25°C) | | | 0.75 | 2.5 | % | I+IN = 1mA | 3 |
| IOUT Current Error (0°C to 85°C) | | | | 3 | % | I+IN = 1mA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IOUT Current Error (full specified range) | | | | 4 | % | I+IN = 1mA | 3 |
| IMON Current Error (25°C) | | | 1.5 | 3 | % | I+IN = 10µA | 3 |
| IMON Current Error (0°C to 85°C) | | | | 3.5 | % | I+IN = 10µA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IMON Current Error (full specified range) | | | | 5 | % | I+IN = 10µA | 3 |
| IMON Current Error (25°C) | | | 1.7 | 4 | % | I+IN = 1mA | 3 |
| IMON Current Error (0°C to 85°C) | | | | 5 | % | I+IN = 1mA; 0°C ≤ TA ≤ 85°C (Note 6) | 3 |
| IMON Current Error (full specified range) | | | | 6 | % | I+IN = 1mA | 3 |
| IOUT Current Error Change with IOUT Voltage | ∆IIOUT/VIOUT | | | 0.2 | %/V | VIOUT = 0.4V to 3.5V | 3 |
| IOUT Current Error Change with IOUT Voltage | ∆IIOUT/VIOUT | | | 0.4 | %/V | VIOUT = 0.4V to 5V | 3 |
| IMON Current Error Change with IMON Voltage | ∆IIMON/VIMON | | | 0.2 | %/V | VIMON = 0V to 3.1V, VIOUT = 5V | 3 |
| +IN Current Range | | 0.01 | | 1 | mA | | 3 |
| Supply Current (25°C) | IS | | 16 | 30 | µA | V+ = 5V, I+IN = 0µA | 3 |
| Supply Current (full specified range) | IS | | | 50 | µA | V+ = 5V, I+IN = 0µA | 3 |
| Supply Current (25°C) | IS | | 30 | 50 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V | 3 |
| Supply Current (full specified range) | IS | | | 100 | µA | V+ = 50V, I+IN = 0µA, VIOUT = 25V | 3 |
| RSENSE Resistance | RSENSE | 0.0165 | 0.02 | 0.0225 | Ω | (Note 2) | 3 |
| RSENSE Tolerance (internal, typical) | RSENSE | -7.5 | | 7.5 | % | Internal sense resistor, typical tolerance | 13 |
| RSENSE Temperature Coefficient (internal) | RSENSE | | 3400 | | ppm/°C | Internal sense resistor (Temperature Errors section) | 24 |
| IOUT to IMON Voltage | VIOUT, VIMON | -0.6 | | 36 | V | | 2 |
| V+, +IN to IOUT Voltage | | | | 36 | V | | 2 |
| +IN, -IN, IOUT, IMON Current | | | | 10 | mA | | 2 |
| RSENSE Current Continuous | | | | 3 | A | (Note 2) | 2 |
| RSENSE Current Transient | | | | 5 | A | <0.1 Second | 2 |
| Junction Temperature | TJ | | | 150 | °C | | 2 |
| Storage Temperature Range | TSTG | -65 | | 150 | °C | | 2 |
| Specified Temperature Range (LT6110I) | | -40 | | 85 | °C | LT6110I (Note 3) | 2 |
| Thermal Resistance Junction-to-Ambient (DFN) | θJA | | 80.6 | | °C/W | DC package (8-lead 2mm × 2mm DFN) | 2 |
## CAD (KiCad official)
- Symbol: `LT6110IDC#TRMPBF`
- Footprint: `Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm`
- 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
- 3D model files: `lt6110idc-trmpbf-etched.step` / `lt6110idc-trmpbf-etched.glb` carry the MPN laser-etched on the die in a toggleable `Adom.LaserEtch` group (Fusion-ready); `lt6110idc-trmpbf.step` / `lt6110idc-trmpbf.glb` are the bare package body.
## Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- **Datasheet:** [Analog Devices datasheet](https://www.analog.com/media/en/technical-documentation/data-sheets/6110fa.pdf) (38 pp, sha256 `5bac8d73041462a0`, retrieved 2026-10-30, tier: manufacturer)
- **Extractor:** parts-factory `2.0.0` / `extract_pins 0.3`, primary `claude-haiku-5-5` (text), consensus `claude-sonnet-5-5` (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
- **CAD:** KiCad official libraries (CC-BY-SA 4.0).
[Datasheet PDF](docs/lt6110idc-trmpbf-datasheet.pdf)