main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers lt6110idc-trmpbf: viewers · Ray
lt6110idc-trmpbf-etched.glb Publish 0.1.0 · Ray
lt6110idc-trmpbf-etched.step lt6110idc-trmpbf: factory component page (tier=mfr) · Ray
lt6110idc-trmpbf-hero.glb lt6110idc-trmpbf: hero GLB from the etched model (keeps the MPN mark) · Ray
lt6110idc-trmpbf-hero.overlay.json Publish 0.1.0 · Ray
lt6110idc-trmpbf.glb Publish 0.1.0 · Ray
lt6110idc-trmpbf.kicad_mod Publish 0.1.0 · Ray
lt6110idc-trmpbf.kicad_sym Publish 0.1.0 · Ray
lt6110idc-trmpbf.lbr Publish 0.1.0 · Ray
lt6110idc-trmpbf.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 9 pins · Ray

LT6110IDC#TRMPBF

Analog Devices · Power Management Specialized - PMIC · DFN-8-EP(2x2)

LT6110IDC#TRMPBF from Analog Devices, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 +IN input Positive input to the internal sense amplifier, which drives +IN to the same potential as -IN; a resistor R+IN from V+ to +IN sets the IOUT and IMON output currents.
2 V+ power_in Positive power supply, connected to the more positive side of the sense resistor, with a minimum of 0.1µF required from V+ to V-; supply range is 2.0 V to 50 V.
3 RS passive Internal sense resistor terminal, connected to the load to use the internal 20 mΩ sense resistor, and left open when an external sense resistor is used.
4 -IN input Negative input to the internal sense amplifier, which must be tied to the system load side of the sense resistor, either directly or through a resistor.
5 V- power_in Negative power supply, normally connected to ground.
6 IMON output Sourcing current output that sources a current equal to 3 • VSENSE/RIN.
7 IOUT output Sinking current output that sinks a current equal to VSENSE/RIN, where VSENSE is the voltage across the sense resistor.
8 NC unconnected Not internally connected.
9 V- power_in Exposed pad is V-, and it must be soldered to the PCB.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
V+ Supply Range V+ 2 50 V 3
Amplifier Input Offset Voltage (25°C) VOS 100 300 µV 3
Amplifier Input Offset Voltage (0°C to 85°C) VOS 400 µV 0°C ≤ TA ≤ 85°C (Note 5) 3
Amplifier Input Offset Voltage (-40°C to 0°C) VOS 550 µV -40°C ≤ TA ≤ 0°C (Note 5) 3
Amplifier Input Offset Voltage Change with I+IN (25°C) ∆VOS/∆I+IN 0.15 0.3 mV/mA I+IN = 10µA to 1mA 3
Amplifier Input Offset Voltage Change with I+IN (0°C to 85°C) ∆VOS/∆I+IN 0.5 mV/mA I+IN = 10µA to 1mA; 0°C ≤ TA ≤ 85°C (Note 6) 3
Amplifier Input Offset Voltage Change with I+IN (full specified range) ∆VOS/∆I+IN 1.5 mV/mA I+IN = 10µA to 1mA 3
Amplifier Input Offset Voltage Change with IOUT Voltage ∆VOS/∆VIOUT 0.005 0.02 mV/V VIOUT = 0.4V to 5V 3
Amplifier Input Offset Voltage Change with IMON Voltage ∆VOS/∆VIMON 0.3 1 mV/V VIMON = 0V to 1V 3
Amplifier Input Offset Voltage Drift ∆VOS/∆T 1 µV/°C 3
Amplifier Input Bias Current (-IN) (25°C) IB 35 70 nA V+ = 5V 3
Amplifier Input Bias Current (-IN) (full specified range) IB 100 nA V+ = 5V 3
Power Supply Rejection Ratio (V+ = 2.0V to 36V) PSRR 96 110 dB V+ = 2.0V to 36V 3
Power Supply Rejection Ratio (V+ = 36V to 50V) PSRR 90 100 dB V+ = 36V to 50V 3
IOUT Current Error (25°C) 0.6 1.6 % I+IN = 10µA 3
IOUT Current Error (0°C to 85°C) 2 % I+IN = 10µA; 0°C ≤ TA ≤ 85°C (Note 6) 3
IOUT Current Error (full specified range) 2.5 % I+IN = 10µA 3
IOUT Current Error (25°C) 0.5 1 % I+IN = 100µA 3
IOUT Current Error (0°C to 85°C) 1.5 % I+IN = 100µA; 0°C ≤ TA ≤ 85°C (Note 6) 3
IOUT Current Error (full specified range) 2.3 % I+IN = 100µA 3
IOUT Current Error (25°C) 0.75 2.5 % I+IN = 1mA 3
IOUT Current Error (0°C to 85°C) 3 % I+IN = 1mA; 0°C ≤ TA ≤ 85°C (Note 6) 3
IOUT Current Error (full specified range) 4 % I+IN = 1mA 3
IMON Current Error (25°C) 1.5 3 % I+IN = 10µA 3
IMON Current Error (0°C to 85°C) 3.5 % I+IN = 10µA; 0°C ≤ TA ≤ 85°C (Note 6) 3
IMON Current Error (full specified range) 5 % I+IN = 10µA 3
IMON Current Error (25°C) 1.7 4 % I+IN = 1mA 3
IMON Current Error (0°C to 85°C) 5 % I+IN = 1mA; 0°C ≤ TA ≤ 85°C (Note 6) 3
IMON Current Error (full specified range) 6 % I+IN = 1mA 3
IOUT Current Error Change with IOUT Voltage ∆IIOUT/VIOUT 0.2 %/V VIOUT = 0.4V to 3.5V 3
IOUT Current Error Change with IOUT Voltage ∆IIOUT/VIOUT 0.4 %/V VIOUT = 0.4V to 5V 3
IMON Current Error Change with IMON Voltage ∆IIMON/VIMON 0.2 %/V VIMON = 0V to 3.1V, VIOUT = 5V 3
+IN Current Range 0.01 1 mA 3
Supply Current (25°C) IS 16 30 µA V+ = 5V, I+IN = 0µA 3
Supply Current (full specified range) IS 50 µA V+ = 5V, I+IN = 0µA 3
Supply Current (25°C) IS 30 50 µA V+ = 50V, I+IN = 0µA, VIOUT = 25V 3
Supply Current (full specified range) IS 100 µA V+ = 50V, I+IN = 0µA, VIOUT = 25V 3
RSENSE Resistance RSENSE 0.0165 0.02 0.0225 Ω (Note 2) 3
RSENSE Tolerance (internal, typical) RSENSE -7.5 7.5 % Internal sense resistor, typical tolerance 13
RSENSE Temperature Coefficient (internal) RSENSE 3400 ppm/°C Internal sense resistor (Temperature Errors section) 24
IOUT to IMON Voltage VIOUT, VIMON -0.6 36 V 2
V+, +IN to IOUT Voltage 36 V 2
+IN, -IN, IOUT, IMON Current 10 mA 2
RSENSE Current Continuous 3 A (Note 2) 2
RSENSE Current Transient 5 A <0.1 Second 2
Junction Temperature TJ 150 °C 2
Storage Temperature Range TSTG -65 150 °C 2
Specified Temperature Range (LT6110I) -40 85 °C LT6110I (Note 3) 2
Thermal Resistance Junction-to-Ambient (DFN) θJA 80.6 °C/W DC package (8-lead 2mm × 2mm DFN) 2

CAD (KiCad official)

  • Symbol: LT6110IDC#TRMPBF
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.45mm_EP0.64x1.37mm
  • 3D model: DFN-8-EP(2x2) (KiCad packages3D, STEP)
  • 3D model files: lt6110idc-trmpbf-etched.step / lt6110idc-trmpbf-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lt6110idc-trmpbf.step / lt6110idc-trmpbf.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (38 pp, sha256 5bac8d73041462a0, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF