main
Ray Publish 0.1.0 7d1552f
{
  "slug": "lt3988emse-pbf",
  "version": "0.1.0",
  "type": "component",
  "description": "Analog Devices DC-DC Converters, MSOP-16-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
  "tags": [
    "component",
    "power supply chip",
    "lt3988emse#pbf",
    "factory-2.0.0",
    "extractor-text"
  ],
  "dependencies": {},
  "hero": {
    "type": "image",
    "path": "docs/hero.png"
  },
  "files": [
    "page.json",
    "README.md",
    "lt3988emse-pbf.kicad_sym",
    "lt3988emse-pbf.kicad_mod",
    "lt3988emse-pbf.glb",
    "lt3988emse-pbf.step",
    "lt3988emse-pbf.lbr",
    "docs/hero.png",
    "docs/lt3988emse-pbf-datasheet.pdf",
    "viewers/symbol.html",
    "viewers/footprint.html",
    "lt3988emse-pbf-hero.glb",
    "lt3988emse-pbf-hero.overlay.json",
    "lt3988emse-pbf-etched.glb"
  ],
  "component": {
    "mpn": "LT3988EMSE#PBF",
    "manufacturer": "Analog Devices",
    "package": "MSOP-16-EP",
    "pin_count": 17,
    "category": "Power Supply Chip",
    "subcategory": "DC-DC Converters",
    "datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/3988f.pdf",
    "parts": {
      "symbol": "lt3988emse-pbf.kicad_sym",
      "footprint": "lt3988emse-pbf.kicad_mod",
      "model_3d": "lt3988emse-pbf-hero.glb",
      "model_3d_plain": "lt3988emse-pbf-etched.glb",
      "model_3d_step": "lt3988emse-pbf-etched.step",
      "model_3d_step_plain": "lt3988emse-pbf.step",
      "lbr": "lt3988emse-pbf.lbr"
    },
    "distributor_links": {
      "lcsc": "C580165",
      "digikey": "505-LT3988EMSE#PBF-ND",
      "mouser": "584-LT3988EMSE#PBF"
    },
    "distributor_check": {
      "checked_at": "2026-10-30T11:57:04Z",
      "source": "Component Ocean /api/assign-pns",
      "digikey": {
        "pn": "505-LT3988EMSE#PBF-ND",
        "status": "found"
      },
      "mouser": {
        "pn": "584-LT3988EMSE#PBF",
        "status": "found"
      }
    },
    "pins": [
      {
        "number": "1",
        "name": "DA1",
        "type": "passive",
        "description": "Connects to the anode of the channel 1 external Schottky catch diode; switching is disabled if the DA pin current exceeds 1.32A until it falls below 1.32A."
      },
      {
        "number": "2",
        "name": "SW1",
        "type": "output",
        "description": "Output of the channel 1 internal power switch, connected to the inductor, catch diode and boost capacitor."
      },
      {
        "number": "3",
        "name": "BOOST1",
        "type": "passive",
        "description": "Provides a drive voltage higher than the input voltage to the channel 1 internal NPN power switch."
      },
      {
        "number": "4",
        "name": "BD",
        "type": "power_in",
        "description": "Internal boost diodes connect between BD and the BOOST pins; connect BD to a 3V or higher supply such as VOUT (20V absolute maximum)."
      },
      {
        "number": "5",
        "name": "EN/UVLO",
        "type": "input",
        "description": "Shuts down the LT3988; can be driven from logic, tied to the input, or used as undervoltage lockout via a resistor divider from VIN1 (1.2V typ rising threshold, 80V absolute maximum)."
      },
      {
        "number": "6",
        "name": "BOOST2",
        "type": "passive",
        "description": "Provides a drive voltage higher than the input voltage to the channel 2 internal NPN power switch."
      },
      {
        "number": "7",
        "name": "SW2",
        "type": "output",
        "description": "Output of the channel 2 internal power switch, connected to the inductor, catch diode and boost capacitor."
      },
      {
        "number": "8",
        "name": "DA2",
        "type": "passive",
        "description": "Connects to the anode of the channel 2 external Schottky catch diode; switching is disabled if the DA pin current exceeds 1.32A until it falls below 1.32A."
      },
      {
        "number": "9",
        "name": "VIN2",
        "type": "power_in",
        "description": "Supplies current to the channel 2 internal power switch and must be locally bypassed; connect to VIN1 unless channel 2 has a separate source, must exceed 2.6V (typ), and must be tied to VIN1 if driven above 60V."
      },
      {
        "number": "10",
        "name": "TRACK/SS2",
        "type": "passive",
        "description": "Soft-start or tracking input for channel 2: tie a capacitor for soft-start (internal -1.2µA charging current) or a resistor divider from the tracked output; leave disconnected if unused."
      },
      {
        "number": "11",
        "name": "FB2",
        "type": "input",
        "description": "Channel 2 feedback pin regulated to 0.750V; connect the feedback resistor divider tap here."
      },
      {
        "number": "12",
        "name": "SYNC",
        "type": "input",
        "description": "Synchronizes the oscillator to an external logic-level clock with positive and negative pulse widths of at least 100ns (0.25 to 2.5MHz); connect to ground if unused."
      },
      {
        "number": "13",
        "name": "RT",
        "type": "passive",
        "description": "Sets the internal oscillator frequency with a resistor from RT to GND (250kHz to 2.5MHz)."
      },
      {
        "number": "14",
        "name": "FB1",
        "type": "input",
        "description": "Channel 1 feedback pin regulated to 0.750V; connect the feedback resistor divider tap here."
      },
      {
        "number": "15",
        "name": "TRACK/SS1",
        "type": "passive",
        "description": "Soft-start or tracking input for channel 1: tie a capacitor for soft-start (internal -1.2µA charging current) or a resistor divider from the tracked output; leave disconnected if unused."
      },
      {
        "number": "16",
        "name": "VIN1",
        "type": "power_in",
        "description": "Supplies the internal circuitry and the channel 1 power switch and must be locally bypassed; must exceed 3.9V (typ) for either channel to operate."
      },
      {
        "number": "17",
        "name": "GND",
        "type": "power_in",
        "description": "Exposed pad providing electrical ground and thermal contact to the PCB; must be soldered to the board for proper operation."
      }
    ],
    "provenance": {
      "extractor": "extract_pins 0.3",
      "factory_chain": {
        "factory": "2.0.0",
        "extractor": "extract_pins 0.3",
        "primary_model": "claude-sonnet-5-5",
        "primary_mode": "text",
        "consensus_model": "claude-sonnet-5-5",
        "consensus": "agreed",
        "guards": "pin_guards 0.1: passed",
        "guard_notes": [
          "extractor flagged: Pin types for passive-like pins (DA, BOOST, RT, TRACK/SS) and SW/BD were inferred from function desc",
          "6/17 pins cited to the wrong page (name found elsewhere): ['11:FB2@p6', '12:SYNC@p6', '13:RT@p6', '14:FB1@p6']"
        ],
        "pages_sent": 6,
        "cost_usd": 0.0955,
        "at": "2026-10-30T11:56:48"
      },
      "datasheet": {
        "url": "https://www.analog.com/media/en/technical-documentation/data-sheets/3988f.pdf",
        "pages": 24,
        "sha256": "0d50e10a117d9cb6",
        "source_tier": "mfr"
      },
      "cad": "KiCad official (CC-BY-SA 4.0)",
      "pins": {
        "total": 17,
        "described": 17,
        "cites_pages": true,
        "refuses_to_fabricate": true
      }
    },
    "viewers": {
      "symbol": "viewers/symbol.html",
      "footprint": "viewers/footprint.html"
    },
    "models_3d": [
      {
        "file": "lt3988emse-pbf.step",
        "role": "plain",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          4.039,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "e807f0e0e2c0c408c18dc198f4fc826ff019157c0529c7e78e68c1aab270d826",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      },
      {
        "file": "lt3988emse-pbf-etched.step",
        "role": "eda",
        "up": "Z",
        "units": "mm",
        "origin": "footprint origin = pad-pattern centre",
        "seat": "z = 0",
        "extents_mm": [
          4.9,
          4.039,
          0.95
        ],
        "zmin_mm": -0.0,
        "centre_offset_mm": 0.0,
        "footprint_binding": "identity",
        "sha256": "7cfa01281512325c72b91e6f5f62bbdd3e3fc7e36eb26fec3b46db3665a893df",
        "checked": "2026-10-30",
        "checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
      }
    ],
    "package_dims": {
      "package_code": "MSE16",
      "source_page": 23,
      "e": {
        "nom_mm": 0.5,
        "range_mm": [
          null,
          null
        ]
      },
      "A": {
        "nom_mm": 1.1,
        "range_mm": [
          null,
          1.1
        ]
      },
      "source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
      "model_check": {
        "file": "lt3988emse-pbf.step",
        "verdict": "PASS",
        "reasons": [
          "height within the datasheet's package drawing"
        ],
        "by": "factory/package_fit.py"
      }
    }
  }
}