main
Ray
Publish 0.1.0
729fdc3
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253
{
"slug": "lt3970eddb-trmpbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices DC-DC Converters, DFN-10-EP(2x3). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"power supply chip",
"lt3970eddb#trmpbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3970eddb-trmpbf.kicad_sym",
"lt3970eddb-trmpbf.kicad_mod",
"lt3970eddb-trmpbf.glb",
"lt3970eddb-trmpbf.step",
"lt3970eddb-trmpbf.lbr",
"docs/hero.png",
"docs/lt3970eddb-trmpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3970eddb-trmpbf-hero.glb",
"lt3970eddb-trmpbf-hero.overlay.json",
"lt3970eddb-trmpbf-etched.glb"
],
"component": {
"mpn": "LT3970EDDB#TRMPBF",
"manufacturer": "Analog Devices",
"package": "DFN-10-EP(2x3)",
"pin_count": 11,
"category": "Power Supply Chip",
"subcategory": "DC-DC Converters",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3970.pdf",
"parts": {
"symbol": "lt3970eddb-trmpbf.kicad_sym",
"footprint": "lt3970eddb-trmpbf.kicad_mod",
"model_3d": "lt3970eddb-trmpbf-hero.glb",
"model_3d_plain": "lt3970eddb-trmpbf-etched.glb",
"model_3d_step": "lt3970eddb-trmpbf-etched.step",
"model_3d_step_plain": "lt3970eddb-trmpbf.step",
"lbr": "lt3970eddb-trmpbf.lbr"
},
"distributor_links": {
"lcsc": "C580155",
"digikey": "LT3970EDDB#TRMPBFTR-ND",
"mouser": "584-LT3970EDDBTRMPBF"
},
"distributor_check": {
"checked_at": "2026-10-30T20:29:36Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "LT3970EDDB#TRMPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3970EDDBTRMPBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "FB/VOUT",
"type": "input",
"description": "For the adjustable LT3970 this is FB, regulated to 1.21V from the feedback resistor divider tap (on fixed-output -X versions it is VOUT, connecting to the internal feedback divider for 3.3V, 3.42V or 5V)."
},
{
"number": "2",
"name": "EN",
"type": "input",
"description": "Shutdown when low and active when high, with hysteretic threshold of 1V rising and 0.97V falling, accurate only when VIN is above 4.2V; tie to VIN if shutdown is not used."
},
{
"number": "3",
"name": "VIN",
"type": "power_in",
"description": "Supplies current to the internal circuitry and the internal power switch, and must be locally bypassed."
},
{
"number": "4",
"name": "GND",
"type": "power_in",
"description": "Ground pin, must be soldered to the PCB."
},
{
"number": "5",
"name": "GND",
"type": "power_in",
"description": "Ground pin, must be soldered to the PCB."
},
{
"number": "6",
"name": "SW",
"type": "output",
"description": "Output of the internal power switch, connected to the inductor."
},
{
"number": "7",
"name": "BOOST",
"type": "power_in",
"description": "Provides a drive voltage higher than the input voltage to the internal bipolar NPN power switch."
},
{
"number": "8",
"name": "BD",
"type": "power_in",
"description": "Anode of the boost diode, which also supplies current to the internal regulator when BD is above 3.2V."
},
{
"number": "9",
"name": "PG",
"type": "output",
"description": "Open-drain output of an internal comparator that stays low until FB is within 10% of final regulation voltage, valid when VIN is above 4.2V and EN is high."
},
{
"number": "10",
"name": "RT",
"type": "passive",
"description": "A resistor tied between RT and ground sets the switching frequency."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed pad is ground and must be soldered to the PCB."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-sonnet-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: MPN suffix #TRMPBF denotes 500-unit reels of LT3970EDDB (adjustable version, pin 1 = FB), so pin 1 i; Pin types for BOOST, BD and RT are inferred from the described functions; the datasheet does not sta"
],
"pages_sent": 10,
"cost_usd": 0.0991,
"at": "2026-10-30T20:29:28"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3970.pdf",
"pages": 24,
"sha256": "e25978555387c0ba",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3970eddb-trmpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
2.98,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "f32bf7ac72cd74fd3cd2ce5cc9cea9c0b978a57d74a28ba263b71c7e8b9d294b",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3970eddb-trmpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
2.0,
2.98,
0.77
],
"zmin_mm": 0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "1d91e74f2aece57b593495d667a016338e2aa603742ded5ba27e831930abd9b1",
"checked": "2026-10-30",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
],
"package_dims": {
"package_code": "DDB10",
"source_page": 21,
"D": {
"nom_mm": 3.0,
"range_mm": [
null,
null
]
},
"E1": {
"nom_mm": 2.0,
"range_mm": [
null,
null
]
},
"e": {
"nom_mm": 0.5,
"range_mm": [
null,
null
]
},
"A": {
"nom_mm": 0.75,
"range_mm": [
null,
null
]
},
"source": "datasheet package drawing, every number found on its page (extract_pins --task dims)",
"model_check": {
"file": "lt3970eddb-trmpbf.step",
"verdict": "PASS",
"reasons": [
"height within the datasheet's package drawing"
],
"by": "factory/package_fit.py"
}
}
}
}