main
Ray
Publish 0.1.0
67dee5f
123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212
{
"slug": "lt3960jmse-trpbf",
"version": "0.1.0",
"type": "component",
"description": "Analog Devices CAN Transceivers, MSOP-10-EP. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.",
"tags": [
"component",
"communication interface chip",
"lt3960jmse#trpbf",
"factory-2.0.0",
"extractor-text"
],
"dependencies": {},
"hero": {
"type": "image",
"path": "docs/hero.png"
},
"files": [
"page.json",
"README.md",
"lt3960jmse-trpbf.kicad_sym",
"lt3960jmse-trpbf.kicad_mod",
"lt3960jmse-trpbf.glb",
"lt3960jmse-trpbf.step",
"lt3960jmse-trpbf.lbr",
"docs/hero.png",
"docs/lt3960jmse-trpbf-datasheet.pdf",
"viewers/symbol.html",
"viewers/footprint.html",
"lt3960jmse-trpbf-hero.glb",
"lt3960jmse-trpbf-hero.overlay.json",
"lt3960jmse-trpbf-etched.glb"
],
"component": {
"mpn": "LT3960JMSE#TRPBF",
"manufacturer": "Analog Devices",
"package": "MSOP-10-EP",
"pin_count": 11,
"category": "Communication Interface Chip",
"subcategory": "CAN Transceivers",
"datasheet": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3960.pdf",
"parts": {
"symbol": "lt3960jmse-trpbf.kicad_sym",
"footprint": "lt3960jmse-trpbf.kicad_mod",
"model_3d": "lt3960jmse-trpbf-hero.glb",
"model_3d_plain": "lt3960jmse-trpbf-etched.glb",
"model_3d_step": "lt3960jmse-trpbf-etched.step",
"model_3d_step_plain": "lt3960jmse-trpbf.step",
"lbr": "lt3960jmse-trpbf.lbr"
},
"distributor_links": {
"lcsc": "C3231394",
"digikey": "505-LT3960JMSE#TRPBFTR-ND",
"mouser": "584-LT3960JMSE#TRPBF"
},
"distributor_check": {
"checked_at": "2026-10-28T22:46:52Z",
"source": "Component Ocean /api/assign-pns",
"digikey": {
"pn": "505-LT3960JMSE#TRPBFTR-ND",
"status": "found"
},
"mouser": {
"pn": "584-LT3960JMSE#TRPBF",
"status": "found"
}
},
"pins": [
{
"number": "1",
"name": "CANSDAL",
"type": "bidirectional",
"description": "Low-level CAN bus line of the I2CAN link that carries the I2C data bus."
},
{
"number": "2",
"name": "CANSDAH",
"type": "bidirectional",
"description": "High-level CAN bus line of the I2CAN link that carries the I2C data bus."
},
{
"number": "3",
"name": "GND",
"type": "power_in",
"description": "Ground; the datasheet says to solder this pin and the exposed pad directly to the ground plane."
},
{
"number": "4",
"name": "CANSCLH",
"type": "bidirectional",
"description": "High-level CAN bus line of the I2CAN link that carries the I2C clock bus."
},
{
"number": "5",
"name": "CANSCLL",
"type": "bidirectional",
"description": "Low-level CAN bus line of the I2CAN link that carries the I2C clock bus."
},
{
"number": "6",
"name": "VIN",
"type": "power_in",
"description": "Input supply to the internal LDO, specified for 4V to 60V operation, to be bypassed with a 1µF capacitor to GND as close to the pin as possible; tie VIN to VCC if the LDO is unused."
},
{
"number": "7",
"name": "EN/MODE",
"type": "input",
"description": "Mode and shutdown pin: tie above 2.5V to select master mode, float to select slave mode, or pull to ground for low-power shutdown."
},
{
"number": "8",
"name": "VCC",
"type": "power_out",
"description": "Output of the 3.3V LDO and power supply input for the device, to be bypassed with a 2.2µF or greater capacitor to ground placed as close to the pin as possible."
},
{
"number": "9",
"name": "SCL",
"type": "bidirectional",
"description": "I2C serial clock: an input for the master clock when EN/MODE is 2.5V or above, and an output carrying data received on CANSCLH/L when EN/MODE is floating."
},
{
"number": "10",
"name": "SDA",
"type": "bidirectional",
"description": "I2C serial data input and output pin."
},
{
"number": "11",
"name": "GND",
"type": "power_in",
"description": "Exposed pad is ground and must be soldered to the PCB."
}
],
"provenance": {
"extractor": "extract_pins 0.3",
"factory_chain": {
"factory": "2.0.0",
"extractor": "extract_pins 0.3",
"primary_model": "claude-haiku-5-5",
"primary_mode": "text",
"consensus_model": "claude-sonnet-5-5",
"consensus": "agreed",
"guards": "pin_guards 0.1: passed",
"guard_notes": [
"extractor flagged: The datasheet pin-function list does not give an electrical type for each pin. Types were assigned f; VCC is both the LDO output and the device supply input. It is typed power_out here, but power_in or ; The exposed pad is labeled as pin 11 in the datasheet text, not as a separate pad number. It is list"
],
"pages_sent": 9,
"cost_usd": 0.0574,
"at": "2026-10-28T22:46:34"
},
"datasheet": {
"url": "https://www.analog.com/media/en/technical-documentation/data-sheets/lt3960.pdf",
"pages": 22,
"sha256": "78ac2e8eb476d515",
"source_tier": "mfr"
},
"cad": "KiCad official (CC-BY-SA 4.0)",
"pins": {
"total": 11,
"described": 11,
"cites_pages": true,
"refuses_to_fabricate": true
}
},
"viewers": {
"symbol": "viewers/symbol.html",
"footprint": "viewers/footprint.html"
},
"models_3d": [
{
"file": "lt3960jmse-trpbf.step",
"role": "plain",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "18605eed706df7bb9674107abe7aa36e0ba163a09c21a2cee6c75cfa291b7937",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
},
{
"file": "lt3960jmse-trpbf-etched.step",
"role": "eda",
"up": "Z",
"units": "mm",
"origin": "footprint origin = pad-pattern centre",
"seat": "z = 0",
"extents_mm": [
4.9,
3.0,
0.95
],
"zmin_mm": -0.0,
"centre_offset_mm": 0.0,
"footprint_binding": "identity",
"sha256": "eacf8a458070f00cf08d05de9ef9011f19f51a4e1fffd8d96573874add947d4e",
"checked": "2026-10-28",
"checked_by": "factory/step_pose.py (Z-up, origin, seat, binding)"
}
]
}
}